Nitecore MT2A Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Nitecore MT2A (1 Seiten) in der Kategorie Zaklamp. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/1
®
User Manual
Features
• LED Premium CREE XP-G R5 LED
• Maximum output of up to 280 lumens
• High efficiency current circuit board
• Maximum runtime of up to 50 hours
• Two rapid switching modes suit various user requirements.
• User-defined mode allows for customized brightness levels and a
multitude of functions
• Intelligent memory functions
• Anti-rolling design
• Reverse polarity protection
• Toughened ultra-clear mineral glass with anti-reflective coating
• Aluminum reflector ensures a smooth and powerful beam
• Aero grade aluminum alloy
• HA III Military grade hard anodized
• Detachable two-way anti-rolling clip
• Purpose-made rhombic knurling for better grip
• IPX-8 standard waterproof (submersible to two meters)
Dimensions
Length: 155mm (6.1”)
Head Diameter: 22.56mm (0.92”)
Tail Diameter: 21.5mm (0.85”)
Weight: 67grams (2.36oz)(without battery)
Thanks for purchasing NITECORE!
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address Rm1407-08, Glorious Tower, 850 East Dongfeng Road, ：
Guangzhou, China 510600
Brightness & Runtime
ALL-ROUND Flashlight Expert
Accessories
Clip, lanyard, spare plastic cap,
and spare O-ring
Battery Options
Please follow our facebook for more info: NITECORE Flashlights
Operation instructions
Battery installation (as the picture shows)
1. Unscrew the tail cap in a counter-clockwise direction.
2. Insert two AA batteries with the positive pole pointing forward (toward the
light head).
Switching ON/OFF
Switch ON: Press the button on the tailcap until a “click” is heard.
Switch OFF: Press the button at the tailcap until a second time until a “click” is
heard.
Mode Switching
The Nitecore MT2A has two modes: Turbo and user-defined. These two modes
can be changed by simply tightening and loosening the flashlight head. Turbo
provides 100% output while user-defined users contains five selectable
sub-modes.
Turbo Mode
Turbo mode is accessed when the MT2A flashlight is switched ON and the
head lightly tightened. While in this mode, momentary illumination can be
achieved by switching off the flashlight and then half pressing and holding the
switch. Momentary illumination can be used as a flashing signal indicator or
apply to various tactical applications.
Note: After three minutes’ using of turbo mode, the flashlight will lower its
output automatically for preventing overheating, and efficiently ensure the
battery runtime.
User-Defined Mode
User-defined mode is accessed by slightly loosening the flashlight head. In this
mode, lightly and rapidly pressing the switch will cycle through brightness and
other functions in the following order: “High-Mid-Low- SOS-Strobe”. Pressing
the switch all the way down will save and memorize a desired setting.
Tips: Make NITECORE MT2A your perfect multi-task flashlight.
NITECORE MT2A flashlights essentially have two modes: Turbo mode (100%
output) and custom mode. Turbo mode is accessed by tightening the flashlight
head while any of one of the four customizable modes (strobe, low, medium
and high) are selected by loosening the head and rapidly pressing the on/off
switch to cycle through the modes. A given mode can be saved by simply turn
off the light while in that mode. Real-world examples include: When used as a
flashlight around the home, the head can be loosened and low level selected in
custom mode, providing long runtimes at a lower light intensity. The same
flashlight could then be taken out and used a law-enforcement duty light, with
user-defined mode set in strobe, making it easy to alternate between turbo
mode and strobe with a simple twist of the flashlight head.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin
coating of silicon-based lubricant.
Warranty Service
All NITECORE ® products are warranted for quality. DOA / defective products
can be exchanged for replacement though a local distributor/dealer within the
14 days of purchase. After 14 days, all defective / malfunctioning NITECORE®
products will be repaired free of charge for a period of 18 months from the date
of purchase. After 18 months, a limited warranty applies, covering the cost of
labor and maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by
unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE ® products and services, please
contact your national NITECORE ® distributor or send an email to
service@nitecore.com
TURBO HIGH MID LOW
LUMENS
125
LUMENS
280
LUMENS
50
LUMENS
15
2
h
15
min
5
h
12
h
50
h
115m (Beam Distance)
3300cd (Peak Beam Intensity)
IPX-8, 2m
(Waterproof AND Submersible)
1.5m (Impact Resistant)
SIZE
Nominal voltage
Compatible
Primary AA battery AA 1.5V Y (Recommended)
Rechargeable AA battery AA 1.2V Y (Recommended)
Primary AA Lithium battery L91 1.5V Y (Recommended)
Primary FeLiPO4 battery 14500 3.2V N (Banned)
Rechargeable Li-ion battery 14500 3.7V N (Banned)
NOTICE
Stated data has been
measured according to
the international
flashlight testing
standards ANSI/NEMA
FL1 using two high
quality AA Ni-Mh
rechargeable batteries
(1.2V, 2400mAh) under
laboratory conditions.
The data may vary due
to individual usage
habits and environmental
conditions.
WARNING
Ensure batteries are
inserted with the
positive (+) end
pointing to the head.
The MT2A will not
operate with incorrectly
inserted batteries.
NITECORE (SYSMAX) is a member of PLATO, participating in and helping to develop
the ANSI FL1 standard of measurement. Product testing data is in accordance with
these internationally recognized scientific standards.
Produktspezifikationen
| Marke: | Nitecore |
| Kategorie: | Zaklamp |
| Modell: | MT2A |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Nitecore MT2A benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Zaklamp Nitecore
6 September 2024
6 September 2024
4 September 2024
4 September 2024
4 September 2024
3 September 2024
3 September 2024
2 September 2024
2 September 2024
25 August 2024
Bedienungsanleitung Zaklamp
- Zaklamp Hama
- Zaklamp Nedis
- Zaklamp Philips
- Zaklamp Brennenstuhl
- Zaklamp Makita
- Zaklamp Gorenje
- Zaklamp Schwaiger
- Zaklamp Alecto
- Zaklamp EMOS
- Zaklamp PCE
- Zaklamp Black And Decker
- Zaklamp BEKO
- Zaklamp Trebs
- Zaklamp Black Diamond
- Zaklamp Coleman
- Zaklamp Rocktrail
- Zaklamp DeWalt
- Zaklamp Pyle
- Zaklamp Abus
- Zaklamp Olympia
- Zaklamp Hikoki
- Zaklamp GoGEN
- Zaklamp Stanley
- Zaklamp Livarno
- Zaklamp Varta
- Zaklamp AccuLux
- Zaklamp Ansmann
- Zaklamp Fenix
- Zaklamp GP
- Zaklamp Led Lenser
- Zaklamp Lupine
- Zaklamp Maglite
- Zaklamp Nordride
- Zaklamp Petzl
- Zaklamp Princeton Tec
- Zaklamp Tecxus
- Zaklamp Carson
- Zaklamp Silverline
- Zaklamp Kayoba
- Zaklamp Topeak
- Zaklamp Milwaukee
- Zaklamp Toolcraft
- Zaklamp Silva Schneider
- Zaklamp VDO
- Zaklamp Blackburn
- Zaklamp Cateye
- Zaklamp IVT
- Zaklamp Spanninga
- Zaklamp Supernova
- Zaklamp Greenlee
- Zaklamp Dörr
- Zaklamp Duronic
- Zaklamp Energizer
- Zaklamp Knog
- Zaklamp Steren
- Zaklamp Olight
- Zaklamp Alpha
- Zaklamp Aluratek
- Zaklamp Maverick
- Zaklamp SureFire
- Zaklamp Ledlenser
- Zaklamp Beghelli
- Zaklamp Barska
- Zaklamp Underwater Kinetics
- Zaklamp Alpen Optics
- Zaklamp 4K5
- Zaklamp NightStick
- Zaklamp Coast
- Zaklamp FoxFury
Neueste Bedienungsanleitung für -Kategorien-
16 September 2024
15 September 2024
15 September 2024
11 September 2024
9 September 2024
9 September 2024
7 September 2024
6 September 2024
6 September 2024
6 September 2024