Nitecore HC50 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Nitecore HC50 (1 Seiten) in der Kategorie Taschenlampe. Dieser Bedienungsanleitung war für 26 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
User Manual
Features
· Purpose-designed for hiking, climbing, camping and general outdoor recreation
· All metal high-performance dual-beam headlamp
· Aluminumunibodyconstruction is highly rugged and provides excellent cooling
performance
· Utilizes a premium CREE XM-L2 (T6) LED
· Powered by a single 18650 lithium-ion battery for up to 565 lumens of output
· High-efficiency circuit provides up to 400 hours of runtime
· A custom catoptrics-based system produces an extremely wide 10 beam angle
· Light housing provides 9 vertical movement to eliminate illumination dead-zones
· Direct access to red light mode with a runtime of up to 145 hours
· Innovative single button two-stage switch is remarkably user-friendly (patented)
· Ten rapidly switchable brightness modes to select from
· Integrated red/green power indicator light displays remaining battery power (patented)
· Power indicator secondary function displays battery voltage accurate to 0.1V
· Integrated temperature sensor and intelligent temperature control ensure stable and safe
use
· High-efficiency regulation circuit provides unwavering output
· Toughened ultra-clear mineral glass with anti-reflective coating
· Constructed from aero-grade aluminum alloy
· Rugged HAIII military grade hard-anodized
· Comfortable chafe-free and breathable nylon headband
· Waterproof in accordance with IPX-8 (two meters submersible)
· Impact resistant to 1.5 meters
· Tail stand capability
Dimensions
Length: 86mm (3.39”)
Diameter: 32mm (1.26”)
Weight: 130g (4.59oz)(without battery)
Battery Options
Thanks for purchasing NITECORE!
®
The All-Round Flashlight Expert
TURBO HIGH MID LOW
LUMENS
300
LUMENS
760
LUMENS
140
LUMENS
25
1
h min15
3
h min30
7
h min30
LOWER
LUMENS
1
510
h
55
h
2
h min45
6
h
250
h
26
h
45
min
98m
(Beam Distance)
2 400cd ,
(Peak Beam Intensity)
IPX-8, 2m
(Waterproof AND Submersible)
1.5m
(Impact Resistant)
1×18650 2×CR123
HC50
Battery Installation
1. Insert batteries with the positive (+) and negative (-) ends corresponding to the diagram
below.
2. Tighten the tail cap by aligning the two gold pins on the inside of the tail cap with the
corresponding holes on the flashlight body and rotate clockwise.
Each time a battery is inserted, the power indicator light will blink to indicate battery voltage.
Please refer to the “Power Tips” section of this manual for details.
WARNING
Ensure when turning the HC50 on, the beam is directed away from the eyes of people or
animals.
Accessories
Spare O-ring
NOTICE
The above data has been
measured in accordance
with the international
flashlight testing
standards ANSI/NEMA
FL1 using one x 3.7V
3400mAh Nitecore 18650
battery and 2 x 3V
1700mAh Nitecore CR123
batteries under laboratory
conditions. The data may
vary slightly during
real-world use due to
battery type, individual
usage habits and
environmental factors.
General Operation
The HC50 utilizes a 2-stage switch similar to a camera shutter button. The light’s numerous
functions are selected according to the depth the switch is pressed.
With the light turned off, fully press and release within a second to turn on. The brightness
level displayed will be the last level that was used. Repeat to turn off.
Brightness Selection
With the light turned on, press the switch half way down repeatedly to cycle through the
following output modes: ultra-low, low, medium, high and turbo. A given brightness level will
be memorized each time the light is turned off while that level is displayed.
NB:
1. Medium brightness is the default brightness level when loading a battery for the first time.
2. Every time the main white LED lamp is turned on, an integrated red / green light will
illuminate to indicate battery status. Please refer to the “Power Tipssection of this manual
for details.
Special Police Warning / SOS mode and Location Beacon
With the light turned on, fully press the switch twice in quick succession to turn on the police
warning mode. Half press the switch repeatedly to cycle through location beacon, SOS and
police warning modes. Fully press to exit special mode and turn the light off.
Red Light Illumination / Signal light
With the light turned off, press the switch all the way down and hold for more than one second
to enter into red light illumination mode (1.2 lumens).
When in red light mode, press the switch half way repeatedly to cycle through red light signal
mode and standard red light mode. Fully press the switch to turn the light off.
Power Tips
Whenever the main lamp (white LED) is switched on, a power indicator built into the switch
will either illuminate or blink green or red to indicate battery status.
1. When main light is turned on, the green power indicatior will illuminate for two seconds
when power levels are over 50%.
2. When main light is turned on, the red power indicatior will illuminate for two seconds when
power levels are below 50%.
3. With the main light turned on, the red power indicator will blink rapidly when power levels
are very low and the battery needs to be recharged and replaced.
4. Each time a new battery is inserted, the green power indicator light will blink in various
sequences to indicate battery voltage (accurate to ±0.1V). For example, when battery
voltage is at a maximum of 4.2V, the power indicator will blink 4 times in quick succession,
followed by a one second pause and then two more successive blinks, indicating a total
battery voltage of 4.2V.
ATR Technology
Advanced temperature regulation (ATR) technology allows HC50 to dynamically adjust output
performance based on its internal temperature. This prevents damage from overheating and
prolongs its working life.
Changing Batteries
When the power indicator blinks rapidly it means the batteries need to be replaced or
recharged. Alternatively if the light becomes dim or unresponsive this also indicates batteries
need to be replaced.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of
silicon-based lubricant.
Warranty Service
All NITECOR products are warranted for quality. Any defective / malfunctioning
NITECOR product can be repaired free of charge for a period of 60 months (5 years) from
the date of purchase. Beyond 60 months (5 years), a limited warranty applies, covering the
cost of labor and maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORproducts and services, please contact a local
NITECOR distributor or send an email to service@nitecore.com
All images, text and statements specified herein this user manual are for reference purpose
only. Should any discrepancy occurs between this manual and information specified on
www.nitecore.com, information on our official website shall prevail. Sysmax Industry Co., Ltd.
reserves the rights to interpret and amend the content of this document at any time without
prior notice.
TYPE
Nominal voltage
Compatible
Primary Lithium battery CR123 3V Y (Recommended)
18650 Rechargeable Li-ion battery 18650 3.7V Y (Recommended)
Rechargeable Li-ion battery RCR123 3.7V Y
Output & Runtime
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address Rm1401-03, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600
Please find us on facebook:
NITECORE Flashlights
20151118


Produktspezifikationen

Marke: Nitecore
Kategorie: Taschenlampe
Modell: HC50

Brauchst du Hilfe?

Wenn Sie Hilfe mit Nitecore HC50 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Taschenlampe Nitecore

Bedienungsanleitung Taschenlampe

Neueste Bedienungsanleitung für -Kategorien-