Nitecore HA20 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Nitecore HA20 (2 Seiten) in der Kategorie Taschenlampe. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
User Manual
Features
·Unibody die-cast, lightweight and rugged
·Dual-source headlamp with CREE XP-G2 LED and two F5 red LEDs
·Powered by two AA batteries for a maximum output up to 300 Lumens
·High efficiency circuit board provides up to 160 hours runtime
·Integrated “Precision Digital Optics Technology” provides extreme
reflector performance
·Five brightness levels and three concealed special modes to select
from
·Red LEDs provide constant/flashing illumination
·Displays battery voltage with red light (accurate to 0.1V)
·Features intelligent memory effect
·Innovative single button two-stage switch is remarkably user-friendly
(Chinese Patent: ZL201120062948.1)
·Tilting mechanism provides 90°vertical movement to eliminate
illumination blind zones
·A custom catoptrics-based system produces an extremely wide 10
beam angle
·Featuring Advanced Temperature Regulation (ATR) technology to
dynamically adjust output performance according to its internal
temperature
·Comfortable chafe-free and breathable nylon headband
·Toughened ultra-clear mineral glass with anti-reflective coating
·Constructed from aero-grade aluminum alloy
·Waterproof in accordance with IP67
·Impact resistant to 1.5 meters
Dimensions
Size: 3.54x 2.18x 1.98 (90mm x 55.4mm x 50.4mm)
Head diameter: 0.94(24mm)
Weight: 2.17oz (61.4g) (without battery)
Accessories
Spare O-ring
Battery Options
Output & Runtime
Note: Each time batteries are inserted, the red LEDs will blink to indicate
battery voltage. Please refer to the “Power Tips” section in this manual
for details.
Caution: DO NOT direct the beam towards human or animal eyes when
using HA20.
On/O Operations
To turn HA20 on: Press the switch all the way down until aClick” is
heard;
To turn HA20 off: Press the switch all the way down again until a “Click
is heard.
Brightness Levels
With HA20 turned on, press the switch partway down to cycle through
brightness levels: ultralow, low, medium, high-turbo. HA20 has memory
effect for brightness levels. Each time it is turned on, HA20 will enter the
brightness level last used.
Special Modes(Police Warning/Location
Beacon/SOS)
With HA20 turned on, press the switch all the way down for over one
second to enter police warning mode. Press the switch partway down to
cycle through location beacon-SOS-police warning modes. To exit, press
the switch all the way down to turn HA20 off.
Constant/Flashing Red Illumination
With the light turned off, press the switch partway down for over one
second to enter constant red illumination mode (7 hours and 25 minutes
runtime at 16 Lumens);
In red illumination mode, press the switch partway down to switch
between constant and flashlight red illumination. To exit, press the switch
all the way down to turn HA20 off.
Power Tips
Upon battery installation, the red LEDs will blink to indicate battery
voltage (accurate to 0.1V). For example, when battery voltage is 2.4V,
red LEDs blink twice, followed by a 1.5 second pause, and blink four
Thanks for purchasing NITECORE!
®
The All-Round Flashlight Expert
HA20
Operating Instructions
HA20 utilizes a two-stage switch to enable various operations based on
finger pressure.
Battery Installation
Insert two AA batteries with the positive (+) and negative (-) ends
corresponding to the diagram below. Align the cover .
TYPE
Nominal voltage
Compatible
Primary AA battery AA 1.5V Y (Recommended)
Rechargeable AA battery AA 1.2V Y (Recommended)
Primary AA Lithium battery L91 1.5V Y
NOTICE
The above data has been measured in accordance with the international
flashlight testing standards ANSI/NEMA FL1 using 2 x 1.2V 2400mAh AA
batteries under laboratory conditions. The data may vary slightly during
real-world use due to battery type, individual usage habits and
environmental factors.
TURBO HIGH MID LOW ULTRALOW
LUMENS
300
LUMENS
160
LUMENS
90
LUMENS
30
LUMEN
1
1
h
45
min
2
h
30
min
5
h
45
min
17h 160h
110m
(Beam Distance)
1.5m
(Impact Resistant)
3050cd
(Peak Beam Intensity)
IP67
(
Dust & Water Resistant)
)
-
-
+
+
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address Rm1401-03, Glorious Tower, 850 East Dongfeng
Road, Guangzhou, China 510600
Warranty Service
All NITECOR products are warranted for quality. Any defective /
malfunctioning NITECOR product can be repaired free of charge for a
period of 60 months (5 years) from the date of purchase. Beyond 60
months (5 years), a limited warranty applies, covering the cost of labor
and maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by
unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECOR products and services, please
contact a local NITECORE® distributor or send an email to
service@nitecore.com
All images, text and statements specified herein this user manual are
for reference purpose only. Should any discrepancy occurs between this
manual and information specified on www.nitecore.com, information on
our official website shall prevail. Sysmax Industry Co., Ltd. reserves the
rights to interpret and amend the content of this document at any time
without prior notice.
®
ALL-ROUND Flashlight Expert
times.
With HA20 turned off, pressing the switch partway down will have red
LEDs indicate battery power levels:
1. Three times for battery levels over 50%;
2. Twice for battery levels below 50%;
3. Once for battery levels close to depletion (below 10%).
Advanced Temperature Regulation
(ATR)
Advanced temperature regulation (ATR) technology allows HA20 to
dynamically adjust output performance based on its internal temperature.
This prevents damage from overheating and prolongs its working life.
Changing Batteries
Batteries should be replaced when any of the following occurs: The
output appears to be dim or unresponsive.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a
thin coatingof silicon-based lubricant.
Thanks for purchasing NITECORE!
Please nd us on facebook: NITECORE Flashlights
20150909


Produktspezifikationen

Marke: Nitecore
Kategorie: Taschenlampe
Modell: HA20

Brauchst du Hilfe?

Wenn Sie Hilfe mit Nitecore HA20 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Taschenlampe Nitecore

Bedienungsanleitung Taschenlampe

Neueste Bedienungsanleitung für -Kategorien-