Nissin MG8000 Extreme (Canon) Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Nissin MG8000 Extreme (Canon) (11 Seiten) in der Kategorie Blitz. Dieser Bedienungsanleitung war für 42 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/11
INSTRUCTION MANUAL
DIGITAL TTL POWER ZOOM FLASH
Please refer Nissin’s compatibility chart shown in its home page for details and
recent updates: http://www.nissin-japan.com or http://www.nissindigital.com
SIMPLE OPERATION
When attaching MG8000 to the camera, the basic flash exposure operation is
fully controlled by the camera. It is the same idea as when you use the built-in
camera flash but placed on the hotshoe.
SPECIAL FEATURES
MG8000 is featuring exetreme high heat resistance to obtain more than 1000
times continuum emitting with full power without overheating problems.
Assorting with Nissin Power Pack PS300 is suggested, enables blazing fast
and maximizes the extreme performance.
In additon, MG8000 provides many advanced flash functions, such as Wireless
TTL off camera flash technology, high speed shutter synchronization, frequent
repeat-flash system, External Av priority setting, etc. are supported.
1 2
Compatible cameras
Thank you for purchasing a Nissin product
UNIQUE FUNCTION
Before using this flash unit, please read this instruction manual and refer
your camera owner’s manual carefully to get a better understanding of
proper operation to enjoy flash photography.
The color display automatically rotates
to allow for easy operation in both the
horizontal and vertical positions.
Nissin MG8000 Extreme type Canon is designed for Canon digital SLR, with
the latest TTL flash control system, and features Nissin’s original rotating color
display, easily guiding its operations.
It works automatically with Canon ETTL/ ETTL II auto-flash systems.
Please note that MG8000 Extreme type C is not usable with other branded
cameras for TTL operation.
Nissin Jap an Ltd. , Tokyo
http:// www.nissin-japan.com
Nissin Marketing Ltd . , Hon g Kong
http:// www.nissindigital.com
MG0412C REV. 1.2
Type C
Design and Specifications are subject to change without prior notice.
MG8000 Flash Mode and Functions - to be set on the flash unit. Advanced functions are provided in some operation modes –
to be set on the flash unit
Functions by Camera setting – The flash is automatically
controlled by the camera
These safety instructions refer to important information on how to use this
product safely and properly. Please read the following instructions before using
the product.
MENU SCREEN FOR MAIN MODES
5 6
3 4
Flash light is fully controlled by the camera for the most proper exposure.
*1 Effective on at Universal Slave function in Manual Power operation and when using MG8000 with film
type camera or with non dedicted camera.
*2 Effective on Universal Slave function, and when using MG8000 with film type camera or with non
dedicated camera.
ADVANCED FUNCTIONS
SAFETY INSTRUCTIONS Nomenclature
WARNING
The flash unit contains high voltage electric parts. Do not try to open or repair the flash unit. Return it back to the
repair service station or the store you bought it from.
Do not touch the inside parts from the opening when the unit was dropped or broken.
Do not shoot the flash directly to the eyes at short distance. It may damage the eyes.
When taking a flash picture, especially toward a baby, it is recommended to keep the flash unit at least 1 meter
(3.3feet) away from the subject. Or use diffuser or bounce the light to the ceiling or wall to soften its intensity.
Do not place the flash unit near any flammable gas, chemical or such liquids. It may cause fire or electric shock.
Do not touch the flash unit with wet hands or use in the water. The flash unit carries high voltage inside and it
may cause an electric shock.
Do not shoot the flash unit directly at the driver of automobiles or such vehicles.
Do not set the flash window close to the human body and shoot, which may get scalded.
Place the batteries correctly in position. Placing the batteries in wrong polarity may cause leakage, exothermic
heat or explosion.
Do not touch the metal parts after long time flashing, which may get scalded.
CAUTIONS
Do not leave or store the flash unit in the temperature over 40ºC, such as in the automobile.
The flash unit is not water resistance. Keep the unit away from rain, snow and humidity.
Do not use benzene, thinner or other alcoholic agents to clean the unit.
Do not use this flash unit with the cameras which are not recommended in compatibility list at official
website, otherwise it may damage the camera’s circuitry.
Remove the batteries when not in use for a longer period of time.
Do not have a heavy impact to the flash unit, nor throw it onto a hard surface floor.
When using the external power pack, read the safety instructions carefully and follow the operation manual.
This sign refers the danger or serious damage.
This sign refers the damage or defect.
Full Automatic Mode
TTL Program Mode
Manual Setting Mode
Multi- flash Mode
Wireless Remote Flash Mode
Custom Setting Mode
Full Automatic Mode
…
…
…
…
…
…
page 10
Flash light is automatically controlled by the camera but the flash exposure
TTL Program Mode page 12
Manual Mode -Selecting the desired manual power on the flash unit,
Manual Setting Mode page 17
Multiple lighting exposes the playback photos in one frame of picture.
Multi-flash Mode page 23
Placing multiple numbers of flashes (slave flash) off camera and controlling the
Wireless Remote Flash Mode page 25
Variety of custom settings is available for own default value.
Custom Setting Mode page 33
Advanced
Functions
Operation Modes
Sub-Flash
Manual Zoom
Slave Function
F.Stop Setting*1
ISO setting*2
TTL Program Mode
TTL Program Mode
Manual Setting Mode
Manual Setting Mode
Manual Setting Mode
Manual Setting Mode
Manual Setting Mode
Flash exposure can be locked at the main subject while moving the framing.
FE. Lock page 34
FE.
Lock
value can be compensated.
Av poriority Mode- Selecting the desired f-stop on the flash unit.
creative TTL lighting.
Flash stand
Extra
battery magazine (optional)
Soft Case
Diffuser
Flash head/
Wireless transmitter
Sub-Flash
AF-assist light
External auto exposure sensor
Rotating
display screen
Set button
Pilot lamp (Test flash button) On/Off switch (System lock button)
Select button
Select button
Battery magazine
Lock ring
X-terminal
USB service port
Power Pack socket
Hotshoe contacts
Foot lock pin
External service
box
Mounting foot
Multifunction button
Remote/ Slave sensor
NOTE
BASIC OPERATION
SETTING THE MODE AND THE FUNCTION
Remove the battery magazine and insert
4 x size AA batteries as shown in the
picture.
Press the on/off switch. Screen A appears, and the mode A is set.
The pilot lamp blinks red showing the unit is charging.
In a few seconds, the pilot lamp turns green.
The display screen automatically turns off in about 30 seconds after the
setting job is terminated.
For a test-flash, press the pilot lamp.
To turn off the flash unit manually, press the on/off switch and hold it for 2
seconds.
Set MG8000 to the camera’s hotshoe and press the on/off switch to power on.
Display screen automatically shows A, the Full Automatic
Mode.
MG8000 is now set for the camera’s automatic flash control
system.
Press the on/off switch once again to lock this condition on
your flash. (Press it again to release the lock)
All the jobs required for this mode are completed.
When the pilot lamp turns green, press the shutter button of your camera
halfway to focus the subject.
Shutter speed, aperture and flash mark ( ) are shown in camera’s view finder
and the display panel of the camera.
Press the shutter, and MG8000 is fired. The result is immediately shown on the
camera’s LCD monitor.
Flash power is automatically controlled by the camera and the most proper
exposure is obtained on your picture.
When you change the focal length of your camera lens, MG8000 responds
without delay and sets its light source for the proper illumination angle.
The lens focal length you set is shown in the display screen of the flash unit.
The battery compartment is specially
designed so that every cell is placed in the
same direction to avoid the confusion in
poor light condition.
It is recommended to use all 4 batteries in same brand and type, and
replace them all at the same time.
Wrong insertion of each cell would not make electric contact.
+/- symbol is clearly marked at the battery
compartment.
Place the battery magazine back into the
body.
7 8
910
!
1.
2.
The power is automatically turned off (to stand-by mode), in about 30
seconds of idle use on the camera or after the last setting is made. To
save the battery energy, you can select the display-off setting from the
custom setting. In this case, the display screen turns off in about 8
seconds of idle use.
While MG8000 is in the stand-by mode, display screen turns off and the
pilot lamp blinks every 2 seconds showing the flash unit is in stand-by
mode.
To turn on MG8000 again, press the camera’s shutter button halfway or
press any button of the flash unit.
In case the MG8000 is not in use over 30 minutes, the unit is completely
turned off. To turn on MG8000 again, take the first step of turning the
flash unit on.
In case of using MG8000 in off-camera-use mode (Wireless TTL
flash-slave, Universal Slave function), it is recommended to change the
turn off timer at the Custom setting....ref. page 33 .
The mode and the value set on the flash unit before turning off is
memorized and returns in the same condition when switch it on again.
1.
2.
4.
When the recycle time becomes longer
than 20 seconds, replace the batteries
with the fresh ones or recharge the
batteries (rechargeable batteries).
3.
Turn off the power switch of both MG8000
and the camera.
Turn the lock ring of MG8000 to loosen it
all the way as shown in the picture.
Slide the mounting foot of MG8000 into
the hotshoe of the camera.
Turn the lock ring to opposite direction
and tighten it.
1.
2.
3.
4.
Lock pin comes out to hook the foot at the
hotshoe for sure contact.
5.
Loosen the lock ring and slide the mounting foot of MG8000 off the hotshoe
of the camera. Make sure to turn the lock ring all the way to completely
clear the lock pin off the hooking slot on the hotshoe.
Inserting batteries
Turn on the flash unit
Mounting MG8000 on the Camera
Removing MG8000 from the Camera
MG8000 has energy saving double power off function.
Full Automatic Flash Control
Usable batteries - Alkaline batteries, Lithium batteries, NiMH batteries.
The modes to be set on the camera:
In all the camera modes listed above, MG8000 will automatically and fully work
in ETTL / ETTL II automatic flash control system.
(Full Auto), (Program), (Shutter priority),
Portrait, Landscape, Close-up, Sports,
Tv
Av A-DEP
Night Portrait.
(Aperture priority), (Manual), Automatic depth-of-field,
Produktspezifikationen
| Marke: | Nissin |
| Kategorie: | Blitz |
| Modell: | MG8000 Extreme (Canon) |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Nissin MG8000 Extreme (Canon) benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Blitz Nissin
4 September 2024
25 August 2024
19 August 2024
16 August 2024
15 August 2024
14 August 2024
14 August 2024
13 August 2024
12 August 2024
11 August 2024
Bedienungsanleitung Blitz
- Blitz LogiLink
- Blitz Sony
- Blitz Panasonic
- Blitz Canon
- Blitz Braun
- Blitz Metz
- Blitz Olympus
- Blitz Genaray
- Blitz Cullmann
- Blitz Fujifilm
- Blitz MINOX
- Blitz Nikon
- Blitz Sigma
- Blitz Yongnuo
- Blitz Konica-Minolta
- Blitz Leica
- Blitz Pentax
- Blitz Rollei
- Blitz SeaLife
- Blitz Pulsar
- Blitz Manfrotto
- Blitz EasyMaxx
- Blitz Godox
- Blitz GVM
- Blitz Hähnel
- Blitz Dörr
- Blitz Ikan
- Blitz Kenko
- Blitz Neewer
- Blitz Quantum
- Blitz Sunpak
- Blitz Triopo
- Blitz Vivitar
- Blitz Elinchrom
- Blitz Profoto
- Blitz Vello
- Blitz Aputure
- Blitz Westcott
- Blitz Xantech
- Blitz Bolt
- Blitz Anton/Bauer
- Blitz PolarPro
- Blitz Lastolite
- Blitz ANDYCINE
- Blitz Ikelite
- Blitz COLBOR
- Blitz Goodram
- Blitz Xit
- Blitz Impact
- Blitz Rotolight
- Blitz Cactus
- Blitz Kaiser Fototechnik
- Blitz FoxFury
- Blitz Jinbei
- Blitz Quadralite
Neueste Bedienungsanleitung für -Kategorien-
8 Oktober 2024
7 Oktober 2024
3 Oktober 2024
1 Oktober 2024
1 Oktober 2024
29 September 2024
19 September 2024
16 September 2024
15 September 2024
8 September 2024