Ikan Mylo Bi-Color Mini MB4 Bedienungsanleitung

Ikan Blitz Mylo Bi-Color Mini MB4

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ikan Mylo Bi-Color Mini MB4 (6 Seiten) in der Kategorie Blitz. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
support@ikancorp.com © 2017 ikan Corporation. All rights Reserved
www.ikancorp.com 713.272.8822
CHECKED BY
What’s Included
1 x Mylo Mini Bi-Color LED Light Fixture
1 x Dual Charger
1 x Charger Adapter 12V
1 x Ball Head
1 x Diffuser
1 x Barn Doors
1 x Hard Case
2 x Sony “LBatteries
QUICKSTART GUIDE
MB4-TK
Mylo Mini Bi-Color Portable Field LED Light Travel Kit
General Information
Thank you for choosing Ikan Mylo Mini Bi-Color LED Light. This product will provide you with bright, portable illumination. It can
be used in a variety of different scenarios. It features ultra-bright 420 LED bulbs with 4lens. It has 3200K-5600K variable
color temperature. With its removable barn doors and neutral diffusion filter, the Ikan Mylo Mini Light is the best choice for any
working professional.
This fixture has been designed to perform reliably for years when the guidelines in this booklet are followed. Please read and
understand the instructions in this manual carefully and throughly before attempting to operate this unit. These instructions
contain important information regarding safety during use and maintenance.
Every fixture has been throughly tested. Carefully check the shipping carton for damage that may have occurred during shipping.
If the carton appears to be damaged, carefully inspect your unit for damage and be sure all accessories necessary to operate
the unit have arrived intact. In the event damage has been found or parts are missing, please contact our customer support
team for further instructions. Please do not return this unit to your dealer without first contacting customer support at the
number listed below. Please do not discard the shipping carton in the trash. Please recycle whenever possible.
What’s Included
1 x Mylo Mini Bi-Color LED Light Fixture
1 x Dual Charger
1 x Charger Adapter 12V
1 x Ball Head
Safety Warnings
To guarantee a smooth operation, it is important to follow the guidelines in this manual. The manufacturer of this device will not
accept responsibility for damages resulting from the misuse of this fixture due to the disregard of the information printed in this
manual.
DO NOT try and disassemble or repair the MB4. The fixture must be returned to Ikan for repair or replacement.
DO NOT expose the water or rain; electric shock may occur.
DO NOT operate near flammable gas or vapors.
DO NOT use if the fixture emits smoke or ames. The power supply must be disconnected immediately to prevent bodily injury.
Handle Unit with care. Use only the recommended batteries.
1 x Diffuser
1 x Barn Doors
1 x Hard Case
2 x Sony “L” Batteries
General Guidelines
Mounting the Mylo Mini to a Camera
The Mylo Mini can be mounted to a camera by attaching the shoe mount supplied with the fixture to any camera that has a cold
shoe adapter. (Hot shoe adapters can be used with caution).
The Mylo Mini has a ¼-20" receiver in the bottom of the fixture that can receive the ¼-20" thread of the shoe mount. After
screwing in the mount and tightening the tension disk, the light is now ready to be attached to the camera. Loosening the
tension disk above the shoe adapter, you can slide the shoe mount into the cold/hot shoe of the camera and tighten down the
tension disk.
Mounting the Mylo Mini to a Stand
The Mylo mini can be attached to a stand as well buy using the supplied shoe mount that come with the fixture. The stands that
work most effectively with the Mylo Mini have a ¼-20 or 3/8-15 thread on the top of them. The shoe mount must be modified
to accept the stand by removing the bottom of the shoe and tightening disk from the mount. This will have a ¼-20 insert in
the mount and that can be screwed down on the top of the stand. (Removing the ¼-20 insert allow for you to use the shoe
mount with a 3/8-15 stand instead) The Mylo Mini can now be attached to the top of the shoe mount on the stand. This allow
movement of 360 degrees for placement of the fixture in any position that is desired.
Powering the LEDs
The Mylo Mini can be powered by AC power supply or from the supplied Sony L” Style Batteries. The AC power supply has a
4ft length and allows you to plug the lights into any standard 120-240V outlet. The Mylo Mini can be powered by the supplied
Sony “L” Style batteries Either one or two batteries can be used to power up the fixture.
Adjusting the Color & Brightness of the Light
The My Mini LED Light is controlled by the large yellow knob on the rear of the fixture. The knob was designed with the idea that
it could be reached and adjusted when the light is up on a stand. The knob has two push settings.
1. The default setting is the brightness, from 10%-100% brightness.
2. By pressing in on the knob the color temperature can be adjusted. (Bi-Color Lights)
Fixture Overview: (Front)
Fixture Overview: (Back)


Produktspezifikationen

Marke: Ikan
Kategorie: Blitz
Modell: Mylo Bi-Color Mini MB4

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ikan Mylo Bi-Color Mini MB4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten