NiSi -P2 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für NiSi -P2 (1 Seiten) in der Kategorie Objektiv. Dieser Bedienungsanleitung war für 35 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
The IP-A holder is attached to the top of the phone. The locking screw attaches
to the front of the phone. The registration hole attaches to the back of the
phone. The phone lens is aligned with the registration hole.
Turn the locking screw clockwise, until the IP-A holder is fastened.
IP-A holder installation
* Most phone cases are supported.
* Caution: The phone screen may be damaged if the locking screw is
over tightened.
Align the circular filter bayonet to three installation positions. Ensure that outer
bayonet of the filter aligns with the IP-A holder slot and turn clockwise to tighten.
If multiple filters need to be installed, align the three bayonets on the second
round filter with the three holes on the filter clip slot which have been fixed on
the IP-A holder. Ensure that the outer bayonets of the filter are completely
aligned with the round filter clip slot, then turn clockwise to tighten.
Circular filter installation
Align the three bayonets on the square filter holder with the three holes on the
IP-A holder. Ensure that the outer bayonets of the square filter holder completely
align with the IP-A holder, then turn clockwise to tighten.
Square filter installation
Polarizer Medium GND 0.9 ND 64(1.8)
Eliminates or add reflections
Saturates colors
Enhances blue skies
and green foliage
Ideal degree of graduation
Smooth transition
Particularly useful for scenes
with small elements protruding
into the skyline
Double side nano coating
Optical glass
For long exposure
photography
* Stack up to two filters with the square filter holder.
TRUE COLOR
ND-VARIO
1-5stops (0.3-1.5)
Black mist
1/4
Streak filter
Blue/Orange
Achieve correct exposure
No vignetting on
0.5X magnification
Real Motion Blur
Creates cinematic look
Highlight blooming
Provides little loss of
detail across entire image
Emulates anamorphic lens flare
Creates symmetrical streaks
from point light source
* Stack up to two circular filters.
IP-A holder front IP-A holder back
Square filter holder front Square filter holder back
Registration hole
for phone lens
Locking
screw
Slot
Clip
Silicone
Silicone
Mount for
IP-A holder
Filter slot
Insert the square filter into the square filter holder slot. Ensure that the lens can
be adjusted up and down freely. You are now able to create photographic art.
IP-A holder
Square filter holder
1
2
3 4 5 6 7 8


Produktspezifikationen

Marke: NiSi
Kategorie: Objektiv
Modell: -P2

Brauchst du Hilfe?

Wenn Sie Hilfe mit NiSi -P2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten