Netgear WG103 Bedienungsanleitung
Netgear
Zugangspunkt
WG103
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Netgear WG103 (2 Seiten) in der Kategorie Zugangspunkt. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
)NSTALLATION'UIDE
Please refer to the Reference Manual on your Resource CD for instructions about
advanced configuration options.
Estimated Installation Time: 30 minutes.
Tip: Before mounting the WG103 in a high location, first set up and test the WG103 to
verify wireless network connectivity.
1. Connect the WG103 to the Computer
a. Unpack the box and verify the contents.
b. Prepare a PC with an Ethernet
adapter. If this PC is already part
of your network, record its
TCP/IP configuration settings.
Configure the PC with a static IP
address of 192.168.0.210 and
255.255.255.0 as the subnet mask.
c. Connect an Ethernet cable from
the WG103 to the PC (point A in
the illustration).
d. Securely insert the other end of the
cable into the WG103 Ethernet
port (point B in the illustration).
A
B
e. Turn on your computer, connect the power adapter to the WG103 and verify the
following:
•Power: The power light should be lit. If the power light is not lit, check the
connections and check to see if the power outlet is controlled by a wall
switch that is turned off.
•Test: The test light should be blinking when the WG103 is first turned on.
•LAN: The LAN light should be lit (amber for a 10 Mbps connection and
green for a 100 Mbps connection). If not, make sure the Ethernet cable is
securely attached at both ends.
2. Configure LAN and Wireless Access
a. Configure the WG103 Ethernet port for LAN access.
•Connect to the WG103 by opening your browser and
entering http://192.168.0.229 in the address field.
• When prompted, enter admin for the user name and
password for the password, both in lower case letters.
• Click the Basic Settings link and configure the IP Settings for your network.
b. Configure the wireless interface for wireless access. See the online help or the
Reference Manual for full instructions.
c. Test wireless connectivity using a PC with a wireless adapter configured
according to the wireless settings you just set in the WG103 to establish a
wireless connection to the WG103.
Now that you have finished the setup steps, you are ready to deploy the WG103 in
your network. If needed, you can now reconfigure the PC you used in step 1 back to
its original TCP/IP settings.
1. Disconnect the WG103 and position it where you will deploy it. The best location is
elevated, such as wall mounted or on the top of a cubicle, at the center of your
wireless coverage area, and within line of sight of all the mobile devices.
2. Position the antenna. Vertical positioning provides best side-to-side coverage.
Horizontal positioning provides best top-to-bottom coverage.
3. Connect an Ethernet cable from your WG103 to a LAN port on your router, switch, or
hub.
4. Connect the power adapter to the wireless access point and plug the power adapter in
to a power outlet. The Power and LAN lights should light up.
Tip: The WG103 supports Power Over Ethernet (PoE). If you have a switch that
provides PoE, you will not need to us to power the WG103. e the power adapter
This can be especially convenient when the WG103 is installed in a high
location far away from a power outlet.
Using a computer with an 802.11g or 802.11b wireless adapter, verify connectivity by
using a browser such as Internet Explorer or Mozilla Firefox to connect to the Internet, or
check for file and printer access on your network. In order to connect to the Internet, your
network must include a router that provides Internet access.
Note: If you cannot connect, see to Troubleshooting Tips in this guide or the Reference
Manual on the Resource CD for the ProSafe® 802.11g Wireless Access Point.
WG103_IG.fm Page 1 Monday, March 30, 2009 12:45 PM
March, 2009
This symbol was placed in accordance with the European Union Directive 2002/96 on
the Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of
within the European Union, this product s cled in accordance hould be treated and recy
with the laws of your jurisdiction implementing the WEEE Directive.
© 2009 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered
trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product
names are trademarks or registered trademarks of formation is subject to their respective holders. In
change without notice.
Here are some tips for correcting simple problems you may have.
The wireless access point has no power:
• Make sure the power cord is connected to the access point and plugged in to a
working power outlet or power strip.
• Make sure you are using the correct NETGEAR power adapter supplied with your
access point.
There is a hardware connection problem:
• Make sure the cable connectors are securely plugged in at the access point and the
network device (hub, switch, or router).
• Make sure the connected device is turned on.
The wireless access point’s antennas are not working:
• If the Wireless LAN activity light stays off while the WG103 is transmitting or
receiving data, disconnect the adapter from en plug it in again.its power source and th
• Make sure the antennas are tightly connected to the WG103.
• Contact NETGEAR if the Wireless LAN light remains off while the WG103 is
transmitting or receiving data.
Check these items:
• The WG103 is properly installed, LAN connections are OK, and it is powered on.
Check that the LAN port LED is green to verify that the Ethernet connection is OK.
• If you are using the NetBIOS name of the WG103 to connect, ensure that your PC
and the WG103 are on the same network segm a WINS server on ent or that there is
your network.
• If your PC uses a fixed (static) IP address, ensure that it is using an IP address in the
range of the WG103. The WG103 default IP address is 192.168.0.229 and the default
subnet mask is 255.255.255.0. The WG103 default setting is for a static IP address.
• If the network where you are connecting it is using DHCP, configure it accordingly.
See the Reference Manual on the for the ProSafe® 802.11g Wireless Resource CD
Access Point for more details.
There is a configuration problem. Check these items:
• You may not have restarted the computer with the wireless adapter to have TCP/IP
changes take effect. Restart the computer.
• The computer with the wireless adapter may not have the correct TCP/IP settings to
communicate with the network. Restart the computer and check that TCP/IP is set up
properly for that network. The usual setting for Windows on the Network Properties
is set to “Obtain an IP address automatically.”
• The WG103’s default values may not work with your network. Check the WG103
default configuration against the configuration of other devices in your network.
• For full instructions on changing the access point’s default values, see the
Reference Manual on the Resource CD for the ProSafe® 802.11g Wireless Access
Point.
Thank you for selecting NETGEAR products.
After completing the Smart Wizar e the serial number on the d configuration assistant, locat
bottom label of your product, and use it to register your product at
http://www.NETGEAR.com/register.
Registration is required before you can use our telephone support service. Registration via
our website is strongly recommended. Go to http://kbserver.netgear.com for product
updates and Web support For Warranty and Regional Customer Support information, see .
the Resource CD that came with your product.
WG103_IG.fm Page 2 Monday, March 30, 2009 12:45 PM
Produktspezifikationen
| Marke: | Netgear |
| Kategorie: | Zugangspunkt |
| Modell: | WG103 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Netgear WG103 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Zugangspunkt Netgear
19 September 2024
19 August 2024
31 Juli 2024
31 Juli 2024
30 Juli 2024
23 Juli 2024
21 Juli 2024
19 Juli 2024
16 Juli 2024
16 Juli 2024
Bedienungsanleitung Zugangspunkt
- Zugangspunkt Asus
- Zugangspunkt HP
- Zugangspunkt Macally
- Zugangspunkt ZyXEL
- Zugangspunkt Bosch
- Zugangspunkt Buffalo
- Zugangspunkt Allnet
- Zugangspunkt Devolo
- Zugangspunkt Eminent
- Zugangspunkt Linksys
- Zugangspunkt Renkforce
- Zugangspunkt Fortinet
- Zugangspunkt Netis
- Zugangspunkt Aruba
- Zugangspunkt Lindy
- Zugangspunkt Dell
- Zugangspunkt Mercusys
- Zugangspunkt Honeywell
- Zugangspunkt TRENDnet
- Zugangspunkt AVM
- Zugangspunkt Zebra
- Zugangspunkt TP-Link
- Zugangspunkt Black Box
- Zugangspunkt Techly
- Zugangspunkt Hercules
- Zugangspunkt Huawei
- Zugangspunkt Edimax
- Zugangspunkt DrayTek
- Zugangspunkt Totolink
- Zugangspunkt D-Link
- Zugangspunkt Digitus
- Zugangspunkt DataVideo
- Zugangspunkt Lancom
- Zugangspunkt LevelOne
- Zugangspunkt Cisco
- Zugangspunkt Grandstream
- Zugangspunkt Tenda
- Zugangspunkt Ubiquiti Networks
- Zugangspunkt Intellinet
- Zugangspunkt Bintec-elmeg
- Zugangspunkt Planet
- Zugangspunkt EnGenius
- Zugangspunkt Mikrotik
- Zugangspunkt Moog
- Zugangspunkt Homematic IP
- Zugangspunkt EQ3
- Zugangspunkt Comtrend
- Zugangspunkt INCA
- Zugangspunkt Media-tech
- Zugangspunkt Mercku
- Zugangspunkt Mojo
- Zugangspunkt Sitecom
- Zugangspunkt SMC
- Zugangspunkt Steren
- Zugangspunkt AMX
- Zugangspunkt Vimar
- Zugangspunkt Cudy
- Zugangspunkt Moxa
- Zugangspunkt StarTech.com
- Zugangspunkt AirLive
- Zugangspunkt Kingston
- Zugangspunkt LigoWave
- Zugangspunkt Dahua Technology
- Zugangspunkt Speco Technologies
- Zugangspunkt Atlantis Land
- Zugangspunkt Cradlepoint
- Zugangspunkt SilverNet
- Zugangspunkt Advantech
- Zugangspunkt Juniper
- Zugangspunkt Insteon
- Zugangspunkt Crestron
- Zugangspunkt 3Com
- Zugangspunkt WatchGuard
- Zugangspunkt Aerohive
- Zugangspunkt V7
- Zugangspunkt Syscom
- Zugangspunkt Silex
- Zugangspunkt NUVO
- Zugangspunkt Mach Power
- Zugangspunkt IP-COM
- Zugangspunkt ICC
- Zugangspunkt Amer
- Zugangspunkt Allied Telesis
- Zugangspunkt Hawking Technologies
- Zugangspunkt Cambium Networks
- Zugangspunkt Brocade
- Zugangspunkt Extreme Networks
- Zugangspunkt Bountiful
- Zugangspunkt Meru
- Zugangspunkt Amped Wireless
- Zugangspunkt Ruckus Wireless
- Zugangspunkt Premiertek
- Zugangspunkt FlyingVoice
- Zugangspunkt Luxul
Neueste Bedienungsanleitung für -Kategorien-
13 Oktober 2024
11 Oktober 2024
8 Oktober 2024
4 Oktober 2024
4 Oktober 2024
1 Oktober 2024
1 Oktober 2024
29 September 2024
28 September 2024
24 September 2024