Netgear ProSafe WAGL102 Bedienungsanleitung

Netgear Zugangspunkt ProSafe WAGL102

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Netgear ProSafe WAGL102 (70 Seiten) in der Kategorie Zugangspunkt. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/70

202-10144-02

July 2008

NETGEAR, Inc.

4500 Great America Parkway

Santa Clara, CA 95054 USA

NETGEAR ProSafe

802.11g Wireless Access

Point WG102 Reference

Manual

v1.0, July 2008

Technical Support

Please refer to the support information card that shipped with your product. By registering your product at

http://www.netgear.com/register, we can provide you with faster expert technical support and timely notices of product

and software upgrades.

NETGEAR, INC. Support Information

Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card.

E-mail: support@netgear.com

North American NETGEAR website: http://www.netgear.com

Trademarks

NETGEAR, the NETGEAR logo, ProSafe, and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc.

Microsoft, Windows, Windows NT and Vista are registered trademarks of Microsoft Corporation.Other brand and

product names are registered trademarks or trademarks of their respective holders.

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to

make changes to the products described in this document without notice.

NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit

layout(s) described herein.

FCC Statement.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications.

Declaration of Conformity

We Netgear,

4500 Great America Parkway

Santa Clara, CA 95054, USA

Tel: +1 408 907 8000

declare under our sole responsibility that the product(s)

WG102 (Model Designation)

802.11g ProSafe Wireless Access Point (Product Name)

complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause undesired operation.

To assure continued compliance, any changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables

when connecting to computer or peripheral devices).

v1.0, July 2008

iii

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try and correct the interference by one or more of the following measures:

• Reorient or locate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Placement and Range Guidelines

Indoors, computers can connect over 802.11 wireless networks at a maximum range of several hundred feet for 802.11b/

g devices. However, the operating distance or range of your wireless connection can vary significantly, based on the

physical placement of the wireless access point.

For best results, identify a location for your wireless access point according to these guidelines:

• Away from potential sources of interference, such as PCs, large metal surfaces, microwaves, and 2.4 GHz cordless

phones.

• In an elevated location such as a high shelf that is near

the center of the wireless c

overage area for all mobile

devices.

Failure to follow these guidelines can result in significant performance degradation or inability to wirelessly connect to

the wireless access point.

RF Exposure Warning for North America, and Australia

Warning! To meet FCC and other national safety guidelines for RF exposure, the antennas for this device (see below)

must be installed to ensure a minimum separation distance of 20cm (7.9 in.) from persons. Further, the antennas shall not

be colocated with other antenna or radio transmitter.

Antenna Statement for North America and Australia

In addition to its own antenna, the WG102 device has been approved for use with the following detachable antennas and

antenna cables.

Approved

Antennas

Antenna Gain and

type

Approved Antenna

Cable

Antenna Cable

Length

Maximum Transmitted

Power1

1. WG102 maximum radiated power in North America and Australia: 19 dBm – cable loss + antenna gain

NETGEAR

ANT24D18

18 dBi, directional

outdoor/indoor

NETGEAR ACC-10314-

01 thru 05

1.5 m to 30 m 18 dBm + 18 dBi ant.

NETGEAR

ANT2409

9 dBi,

omnidirectional

outdoor/indoor

NETGEAR ACC-10314-

01 thru 05

1.5 m to 30 m 18 dBm + 9 dBi ant.

NETGEAR

ANT24O5

5 dBi, ceiling/wall

indoor

NETGEAR ACC-10314-

01 thru 05

1.5 m to 30 m 18 dBm + 5 dBi ant.

Produktspezifikationen

Marke:	Netgear
Kategorie:	Zugangspunkt
Modell:	ProSafe WAGL102
Gewicht:	620 g
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 90 %
Stromverbrauch (Standardbetrieb):	6 W
Power over Ethernet (PoE):	Ja
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Maximale Datenübertragungsrate:	108 Mbit/s
2,4 GHz:	Ja
Antenne Zunahmeniveau (max):	5 dBi
Energiebedarf:	12V DC, 1.0A
Frequenzband:	2.4, 5 GHz
Kompatible Betriebssysteme:	Windows 98, Me, 2000, XP
Abmessungen (BxTxH):	190.5 x 122 x 32 mm
Wireless-Technologien:	WLAN
Verkabelungstechnologie:	10/100Base-T(X)
5 GHz:	Ja
Konformität mit Industriestandards:	IEEE 802.11g, IEEE 802.3af, IEEE 802.11g, IEEE 802.11a, IEEE 802.3af
Datenrate:	54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2
Konnektivität LEDs:	Ja
Anzahl der Verbinder:	2
Antenne Steckertyp:	SMA
Mindestsystemvoraussetzungen:	2 MB storage drive space