Neets LiMa Bedienungsanleitung

Neets Nicht kategorisiert LiMa

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Neets LiMa (12 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/12

Neets Control - LiMa

Installation Manual

Page 2 of 12

Foreword

This document describes how to install and operate the Neets Control - LiMa.

material of Neets. All rights are reserved. You may not allow any third party access to content,

information or data in this manual without Neets’ express written consent.

CHANGES - Neets reserve the right to change the specification and functions of this product

without prior notice.

Questions, AFTER reading this manual, can be addressed to your local distributor or:

Neets A/S

Langballe 4

8700 Horsens

Denmark

by E-Mail: Support@Neets.dk

or you may use our contact form at www.neets.dk

Revision list

This document has the following revision changes:

Author: Date Description Pages Rev

TBB: 09-08-2018 First release. All 1.00

What is in the box?

When you open the box it will contain the following items:

• 1 x Neets Control - LiMa

• 5 x Terminal connectors

• 2 x Screws and plugs for wall mounting O4 x 60 mm

• 2 x Screws for mounting on Neets Rack Shelf M4 x 35 mm

• Manual

!Note that PoE power injector is not included. Use the PoE Injector

(Part num ber: 302-000508).

Page 3 of 12

Important Safety Instructions

Caution:

Read these instructions.

Read and understand all safety and operating instructions before using the equipment.

Keep these Instructions.

The safety instructions should be kept for future reference.

Heed all warnings.

Follow all warnings and instructions marked on the equipment or in the user information.

Avoid attachments.

Do not use tools or attachments that are not recommended, as they may be hazardous.

Warning!:

• This equipment should be operated only from the included power supply.

• To remove power from the equipment safely, remove all power cords from the rear of the equipment, or the

desktop power module (if detachable), or from the power source receptacle (wall plug).

• Power cords should be routed so that they are not likely to be stepped on or pinched by items placed upon or

against them.

• Do not defeat the safety purpose of a polarized or grounding-type plug. A polarized plug has two blades with one

wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the

third prong is provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualiﬁed service personnel. There are no user-serviceable parts inside. To prevent the risk of

shock, do not attempt to service this equipment yourself because opening or removing covers may expose you to

dangerous voltage or other hazards. Contact your local Neets reseller or distributor.

• If the equipment has slots or holes in the enclosure, these are provided to prevent overheating of sensitive

components inside. These openings must never be blocked by other objects.

• Do not use this equipment near water.

• To reduce the risk of ﬁre or electric shock, do not expose this apparatus to rain or moisture and objects ﬁlled

with liquids.

• Unplug the product before cleaning. Clean only with a dry cloth and not cleaning ﬂuid or aerosols. Such products

could enter the unit and cause damage, ﬁre, or electric shock. Some substances may also mar the ﬁnish of the

product.

FCC Class A Notice:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part

15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

The Class A limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful

interference, in which case the user will be required to correct the interference at his own expense.

FCC regulations state that any unauthorized changes or modiﬁcations to this equipment, not expressly approved by

the manufacturer, could void the user’s authority to operate this equipment.

The lightning bolt triangle is used to alert the user to the presence of uninsulated “dangerous

voltages” within the unit’s chassis that may be of sufﬁcient magnitude to constitute a risk of electric

shock to humans.

The exclamation point triangle is used to alert the user to presence of important operating and

service instructions in the literature accompanying the product.

Produktspezifikationen

Marke:	Neets
Kategorie:	Nicht kategorisiert
Modell:	LiMa
Breite:	220 mm
Tiefe:	70 mm
Gewicht:	500 g
Produktfarbe:	Schwarz
Höhe:	35 mm
Betriebstemperatur:	0 - 30 °C
Verpackungsbreite:	280 mm
Verpackungstiefe:	190 mm
Verpackungshöhe:	55 mm
Paketgewicht:	1000 g
Netzstandard:	IEEE 802.3af, IEEE 802.3at
Zertifizierung:	IEC/EN 61000-6-1\nIEC/EN 61000-6-2\nFCC Part 15, Class A\nCE
Power over Ethernet (PoE):	Ja
Warentarifnummer (HS):	85176990
Betriebsanleitung:	Ja
Verpackungsart:	Box
Ethernet LAN Datentransferraten:	10, 100 Mbit/s
Temperaturbereich bei Lagerung:	-20 - 50 °C
Ausgangsstrom:	0.5 A
Ausgangsspannung:	30 V