NEC 50024302 Bedienungsanleitung

NEC Projektionsfläche 50024302

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für NEC 50024302 (2 Seiten) in der Kategorie Projektionsfläche. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

Examples of pictograms

The symbol urges caution (including warnings).

A concrete description of the caution is indicated on the diagram.

The symbol indicates actions that should not be performed.

A concrete description of the forbidden action is indicated on the diagram.

The symbol indicates instructions that must be performed.

A concrete description of the instruction is indicated on the diagram.

WT40SN 40" Panel Screen

WT40SN Assembly Instructions

We greatly appreciate your purchase of this NEC WT40SN flat panel screen.

Read these instructions carefully to ensure proper assembly.

* The WT40SN is a panel screen exclusively for use with mirror projection type projectors.

It can be used in combination with the separately sold dedicated projector stand to form a stand with integrated screen.

M Be sure to read this section before using.

• About the pictograms

Pictograms are used in these assembly instructions and on the product to ensure proper, safe use of the product and

prevent injury to you and others as well as damage to property. The pictograms and their meanings are described

below. Be sure to understand them fully before reading the instructions.





WT40SN-0804K-01





5. Attach the caps to the frames.

Insert the caps over the upper tips of the frames.

Fasten them with the 3 × 10 screws.

The caps prevent the screen unit from coming off.

This completes assembly of the panel screen.

4. Fasten the bottom edge of the

screen to the frames.

Slide the lower lock fittings and line them up with the 

screw holes in the frame bottom edge fitting.

Fasten using two M6 × 10 screws.

3. Insert the screen unit’s upper lock

fitting into the frame and fasten

temporarily with the height adjust-

ment knobs.

Fasten the screen unit at the position of the stoppers in

the frame.

2-2. When using the screen alone

Mount the plate and stands to the

frames.

Line up the frames with the screw holes in the plate,

insert the M6 × 35 screws and fasten to the stands’

screw holes.

2-1. When mounting to a separately

sold dedicated stand

Attach the frames and plate to the dedi-

cated stand.

CAUTION

Before mounting, lock the dedicated stand’s cast-

ers, lower the top panel and tighten the height

adjustment knobs securely so that the stand is sta-

ble.

Line up the panel screen fixing holes in the dedicated 

stand with the holes in the frames.

Place the plate on the frames and fasten it to the dedi-

cated stand using the M6 × 35 screws.

* The stands included with the panel screen are not

used, so store them in a safe place.

1. Mount the two lateral bars to the

frames.

Slide the lower lock fittings to the approximate positions

shown on the diagram and fasten them in place with the

M5 × 50 screws.

M Assembling the Panel Screen

M Checking the Package Contents

Check that the following parts are included in the package.

• Heed the items below.

Failure to heed them could lead to the screen falling or

tipping over, resulting in injury or damage to the equip-

ment.

· Do not place on sloped surfaces or in unstable places.

· Do not hang from the screen, hook objects onto it or

push it.

· Do not climb onto the screen.

· Do not place any objects other than the designated

projector on the screen’s plate.

• Do not scratch the screen with metal objects, etc.

The screen’s surface is protected with an extremely hard

coating, but as a plastic material is used, rubbing hard

objects such as metal against it could scratch it.

CAUTION

• Do not make any modifications. Doing so could lead to

accidents due to the screen falling.

• Be sure to tighten the product’s screws securely. Failure

to do so could lead to the screen falling, resulting in injury

or damage to the equipment.

• Do not use the screen outdoors. Wind could cause the

screen to tip over or fall, resulting in injury or damage to

the equipment.

WARNING

Failure to heed these indications and handling improperly could lead to physical

injury or damage to surrounding property.

CAUTION

Failure to heed these indications and handling improperly could lead to physical

accidents, including death or major injury.

WARNING

NOTE

• Do not place the screen in direct sunlight or other places

exposed to high temperatures, in humid or dusty places,

or in places where it will be exposed to water or oil.

• Do not touch the screen surface. Dirt on the screen will

reduce the picture quality. If the screen surface is dirty,

apply some neutral detergent dissolved in about 20 parts

of water to a soft cloth and wipe off the dirt gently.

Avoid using benzene or thinner, as they could mar the

surface.

• When transporting the screen, do so in the same pack-

aged conditions as when it was purchased to avoid

scratches and damage.

• Keep magnetic recording media at least 10 cm away.

The screen is attached to the board by magnet. Placing

magnetic tickets, credit cards, floppy discs, video tapes,

cassette tapes or other magnetic recording media within

10 cm from the screen could lead to loss of or damage to

the recorded data.

• Do not apply adhesive tape or the like to the screen’

s surface. If cellophane or other adhesive tape is acci-

dentally stuck on the screen surface, peel it off carefully,

being sure that none of the adhesive remains. If there is

any adhesive on the screen surface, wipe it off carefully

using a neutral detergent.

Caps: 2

Frames: 2 Lateral bars: 2

Plate: 1

Stands: 2

Wires: 2 Screen unit: 1

3 × 10 screws: 2

M4 × 8 screws (with washers): 4

M5 × 50 screws: 4 M6 × 35 screws: 4

M6 × 10 screws: 4 Height adjustment knobs: 2

M5 × 50 screw

Lateral bar

Frame

Lower lock fitting

M6 × 35 screw

Plate

Frame

[Dedicated stand]

Panel screen fixing

holes

Plate

Stand

M6 × 35 screw

Frame

Screen unit

Frames

Upper

lock fitting

Stopper

Height adjustment

knob

Lower lock fitting

Frame bottom

edge fitting

M6 × 10 screws

Frames

Cap

3 × 10 screw

Frames

Parallel

ABC



ABC







M Specifications

Screen gain: 2.0

Suited viewing range: 45° (1/2 screen gain)

Effective screen dimensions: 824 (width) × 618 (height) mm

External dimensions: 874 (width) × 476 (depth) × 1085 (height) mm

Weight: Approx. 5.8 kg

* Specifications and design subject to change without notice.

M External View

Units: mm

5. Use the projector’s FOCUS + and –

buttons to accurately adjust the focus.

* If there is keystone (trapezoidal) distortion, adjust using the

projector’s feet.

This completes adjustment of the projection position.

Adjust the height carefully so that the

screen does not tip over. You could be

injured and the equipment damaged if the

screen tips over.

CAUTION

4. Adjust the screen height so that the

projected image (in the vertical direc-

tion) fits on the screen.

Holding the screen’s lateral bar, loosen the left and right 

height adjustment knobs (by turning them counterclockwise).

Adjust the height of the screen, holding it with both hands 

near the height adjustment knobs (keep it level as you raise or

lower it).

Tighten the left and right height adjustment knobs (by turning 

them clockwise).

3. Slide the projector left or right, forward

or backward so that the lower edge of

the projected image (in the horizontal

direction) fits over the full width of the

screen.

In case …

The picture is shifted left or right: Slide left or right to center the

picture on the screen.

The picture is too small: Slide towards the back (the position of

projection rises).

The picture is too large: Slide towards the front (the position of

projection lowers).

2. Use the projector’s FOCUS + and –

buttons to adjust the focus.

1. Place the projector parallel to the

screen.

• Be sure to shorten the projector’s feet. The projected image

will be distorted if the projector is at an angle.

M Fine-adjusting the Projection Position

When the projector is placed at the center of the plate, the picture is

projected at approximately the center of the screen. Fine-adjust the

projection position so that the picture fits on the screen.

REMARKS

The projection distance (between the projector’s rear panel and screen) is

approximately 6.4 cm, the height of the bottom edge of the screen (between

the projector’s bottom panel and the screen’s bottom edge) is approximately

35.4 cm (calculated values).

Preparations: Project an image from the projector.

See the “Installation and Connections” and “Projecting Images (Basic

Operation)” sections of the projector’s user’s manual for complete

instructions on projecting images.

2. Attach the wires to the plate (in two

places).

Pass the wires through the holes in the plate.

Fasten the wires to the plate’s wire lock screw holes using 

M4 × 8 screws.

CAUTION

Be sure to attach the projector using the wires to pre-

vent the projector from falling.

1. Attach the wires to the bottom of the

projector (in two places).

Point the flat surface of the fitting towards the projector and

attach to the rear of the projector using M4 × 8 screws.

M Setting the Projector on the Screen

The setting procedure is the same when the screen is mounted on the dedicated stand.

Preparations: Shorten the projector’s feet.

Turn the four feet clockwise (for the WT610/WT615) and make them as short as possible.

For details, refer to the projector’s user’s manual.

Wire

Wire hole

M4 × 8

screw

Bottom panel of

projector

Rear panel of projector

35.4 cm

6.4 cm

Effective screen

area

1085

345

476

668

618

824

438

874

Produktspezifikationen

Marke:	NEC
Kategorie:	Projektionsfläche
Modell:	50024302

Brauchst du Hilfe?

Wenn Sie Hilfe mit NEC 50024302 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Projektionsfläche NEC

NEC 50024302 Bedienungsanleitung

19 Juli 2024

Bedienungsanleitung Projektionsfläche

Neueste Bedienungsanleitung für -Kategorien-

Optoma DS-3120PMG Bedienungsanleitung

12 Oktober 2024

Da-Lite Cinema Vision Bedienungsanleitung

2 Oktober 2024

Optoma DS-9120PMG Bedienungsanleitung

29 September 2024

Da-Lite Model B Bedienungsanleitung

27 September 2024

Pyle PRJSM1006 Bedienungsanleitung

20 September 2024

Da-Lite Dual Format Imager 38063EV Bedienungsanleitung

11 September 2024

Draper Luma 207008 Bedienungsanleitung

7 September 2024

EPV PGF106WH1-A4K Bedienungsanleitung

6 September 2024

EPV PGF84WH1 Bedienungsanleitung

6 September 2024

Da-Lite Model C With CSR Bedienungsanleitung

5 September 2024