Navilock NL-6002U Bedienungsanleitung

Navilock GPS-Gerät NL-6002U

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Navilock NL-6002U (9 Seiten) in der Kategorie GPS-Gerät. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/9

NL-6002U u-blox NEO-6P USB receiver

Operation manual (62456)

1. Introduction

The NL-6002U is a USB GPS receiver with an internal antenna and a u-blox NEO-6P GPS

module. This module enables a combination of the PPP (Point Positioning Precision) and a

positioning accuracy of SBAS technologies under one meter. The USB port enables the

connection with a notebook, UMPC, tablet PC or car PC. Thanks to its compact design and its

high precision positioning technology, it is the ideal companion at work and at leisure.

1.1. Contents*

1x Navilock NL-6002U

1x 8cm CD ROM including operation manual

* Before using the device, please make sure that all the parts are included in the package. If any

parts are missing or damaged, please contact your dealer immediately.

Important health and safety information

When using this product, take the following precautions in order to avoid possible damages and legal consequences. Always

follow all safety and operation manuals exactly and keep them for future reference. Observe all warnings in the operation manual

and on the product. In order to avoid injuries, electrocution, fire and damages to the product, observe the following precautions:

ELECTRIC SECURITY

This product is designed for operation with power supply via the USB port. Any other operation mode can be dangerous and may

void the warranty claims for this product. This unit contains an internal back-up battery.

NOTE: RECYCLE OR DISPOSE OF USED BATTERIES OR RECHARGEABLE BATTERIES IN

ACCORDANCE WITH ALL APPLICABLE REGULATIONS AND THE INSTRUCTIONS

INCLUDED WITH THE PRODUCT.

PRECAUTIONS REGARDING DIRECT SUNLIGHT

Make sure the unit is not exposed to very high humidity and temperatures. Never leave the unit, the battery or the rechargeable

battery for an extended period in a vehicle or plate, where the temperature can increase to over 60°C (140°F), for example on the

dashboard of a car, the window sill or behind a pane of glass, which is directly exposed to the sun or very strong UV light.

Otherwise the unit or the vehicle may be damaged, and the battery or the rechargeable battery may overheat.

Damages requiring repairs

Disconnect the unit from the AC supply in the following cases; also disconnect the rechargeable battery and contact an

authorized repair man or your dealer.

• Liquid or an object has entered the product.

• The product has fallen down or was damaged.

• There are visible signs of overheating.

• When operated normally, the product does not function flawlessly.

Avoid using the unit directly after strong temperature changes.

If the unit is exposed to strong temperature and humidity fluctuations, condensation can form in the unit. In order to avoid damage

to the unit, please wait until the condensation has dried off before using the unit.

NOTE: If you bring the unit from a cold to a warm environment, or vice versa, first let it get

accustomed to the new temperature before turning it on.

2. Starting operation

2.1. Plug the USB cable in a free USB port on your notebook etc. The NL-6002U will be

recognized by your Windows operating system, which will attempt to install a driver. Abort this

process, and start “ u-center 7.xx Installer.exe ” from the CD-ROM, or download the driver

from the Navilock website. Follow the installation instructions. After the installation is

completed, restart your computer. Then the GPS COM port will be available in the device

manager under connections. Set this port in your navigation or route planner software. Do not

use another program that accesses this port at the same time.

3. LED indicator

Flashes, with Satfix

Lights, without Satfix

4. Application environment

The NL-6002U can be used as a USB GPS receiver under Windows 2000/XP/Vista/7/8. The

corresponding driver is available on the CD-ROM.

5. Functional test with u-center 7.xx

1. Load u-center software from:

http://www.navilock.de/produkte/G_60095/software.html?setLanguage=en. Install the

software on your unit. Select the version suitable for your system. U-center is a pure test

program and cannot be used for navigation or orientation. It must always be closed after

the test. It blocks the COM port and does not allow any access of the navigation or route

software to the COM port. It also serves for updating the Assist GPS data and other

configuration switches.

Produktspezifikationen

Marke:	Navilock
Kategorie:	GPS-Gerät
Modell:	NL-6002U
Breite:	45 mm
Tiefe:	65 mm
Gewicht:	- g
Produktfarbe:	Schwarz
Höhe:	22 mm
Betriebstemperatur:	-20 - 65 °C
Anzahl Kanäle:	- Kanäle
Unterstützt Windows-Betriebssysteme:	Ja
USB-Stecker:	USB Typ-A
Schnittstelle:	USB
Unterstützung anderer Betriebsysteme:	Windows Phone
Unterstützte Linux-Betriebssysteme:	Ja
Antenne:	Intern
Frequenz:	1575.42 MHz
Chipsatz:	u-blox 6
Erwerb Zeiten - kalt:	38 s
GPS Genauigkeit - Position:	2.5 m
Sensitivität:	-160 dBmW
Erwerb Zeiten - heiß:	1 s
Signale benutzt:	L1
Landkarten datums:	WGS-84