Nanuk 940 Bedienungsanleitung

Nanuk Nicht kategorisiert 940

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Nanuk 940 (16 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 36 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/16

Care and Use Guide

Guide d’entretien et d’utilisation

Guía de uso y precauciones

| English p2

| français p6

| español p10

Warranty Information

Thank you for purchasing this NANUK case.

Please read the directions below to learn how to properly use and care for your case.

O-ring seal

Your NANUK case is equipped with an EPDM gasket that has been designed to give superior performance and resist compressive deformation over time. To ensure

a watertight seal, the gasket must be free of cuts, abrasions or tears. Debris or foreign material caught between the sealing rib on the bottom of the case and the

gasket on the top of the case will prevent the case from sealing properly. Applying a coat of an automotive type surface protector is recommended to help prevent

dirt and debris from sticking to the seal. If the seal becomes damaged a replacement seal can be ordered from Plasticase.

Cleaning

All NANUK cases are constructed of high impact NK-7 resin designed to absorb the shocks of transport. The surfaces of the case can easily be wiped clean with

a non-abrasive cleaner approved for use on plastic. Avoid using brushes that could scratch the case. To keep your case looking like new we recommend using an

automotive type surface protector.

Auto pressure equalizer

All NANUK cases are equipped with an automatic pressure release valve. This valve automatically equalizes the pressure on the inside of the case. To ensure correct

operation, this valve does not require any maintenance, does not need to be rotated or adjusted, and must not be blocked.

Care and Use

Press down on the sliding button in the middle

of the lower latch.

Hold the button down and pull the lower latch

towards you to release the compressive force.

Release the button and continue pulling on the

lower latch until it reaches the end of its travel.

Release the lower latch and the upper latch

should disengage; The case can now be opened.

If the latch does not disengage automatically,

press down on the lid and the latches will fall

open. This may be required when the case is

heavily loaded.

Pull the lower latch upwards until you can

engage the upper latch onto the lid of the case.

Once the upper latch is engaged, push

downward on the lower latch until the locking

button engages with the lower half of the case.

An audible click will indicate that the latch is

securely closed. If the latch is in the closed

position but the button does not return to the

locked position, ensure that there are no foreign

objects or debris that are preventing the button

from engaging into the locked position.