Mtx Audio th4000d Bedienungsanleitung

Mtx Audio th4000d

Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Mtx Audio th4000d (44 Seiten) in der Kategorie . Dieser Bedienungsanleitung war fĆ¼r 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/44
TH4000D
Mono Block Class-D Power Ampliļ¬er
4000W
RMS
Designed by MTX in Phoenix, USA
www.mtx.eu.com
www.mtx.com
www.mtx.com - www.mtx.eu.com
Introduction
Thank you for purchasing an MTX Audio Hi-Performance ampliī€Ÿer. Proper installation matched with MTX speak-
ers and subwoofers provide superior sound and performance for endless hours of waking the neighbors, slam-
min' your friends or ī€žat out stomping wanna-be players. Congrats and enjoy the ultimate audio experience with
MTX !
Speciī€Ÿcations :
ā€¢ Mono block class-D ampliīƒ¶er
ā€¢ CEA2006 certiīƒ¶ed Power Output :
- 4000 watts RMS x 1-channel at 1 ohm and THD+N ā‰¤1%
- 2200 watts RMS x 1-channel at 2 ohm and THD+N ā‰¤1%
- 1250 watts RMS x 1-channel at 4 ohm and THD+N ā‰¤1%
ā€¢ Crossover :
- Low pass 24dB/oct variable from 40Hz to 200Hz
- Subsonic īƒ¶lter 24dB/oct variable from 20Hz to 50Hz
ā€¢ Signal-to-Noise Ratio (1 watt) : > 65dB
ā€¢ THD+Noise (Distortion) (1 watt) : ā‰¤ 0,5%
ā€¢ Frequency Response (Ā±0,5dB) : 20Hz-200Hz
ā€¢ Maximum Input Signal : 6V
ā€¢ Maximum Sensitivity : 100mV
ā€¢ Dimensions : 586mm x 213mm x 52,5mm
ā€¢ Phase switch 0Ā° or 180Ā°
ā€¢ High level inputs with Smart Engage Technology
ā€¢ EBC remote control
ā€¢ Bridged mode with gain management
Features :
ā€¢ XTC - (Xtant Technology Cooling) - A regulated thermal intercooler, injecting cool air through internal heat
sinks. Fan speed is load dependent and continuously variable, sampling the temperature of the heat sink and
transformers for maximum reliability. Intercooler exhaust is strategically placed to chill transformers and main-
tain exceptional performance at any volume level. (Cool eh ? An Amp with an Intercooler ! )
ā€¢ Adaptive Class-D Technology - Patent NĀ°: US06753729 - Moves the switching energy produced by the amp
away from FM radio frequency's as the load and output increases. This ensures harmonics do not interfere with
radio reception and are not picked up by the audio system's ground. This improves the ampliī€Ÿer's overall signal-
to-noise ratio and eliminates interference generated by common Class-D ampliīƒ¶ers. Yes, we have the best en-
gineers !
ā€¢ ABB Technology - (Accurate Bridge Balance) - When the need for power is crucial, you can easily bridge two
TH4000D amps together with the Master/Slave function. The master amp manages everything for the slave amp.
The ABB circuitry is so precise, the balance between the two amps nears perfection : less than 0,5% diīƒ²erence.
Impressive and smart!
ā€¢ EAF Technology (Eīƒ³cient Auto Former) - Patent NĀ°: US05598325 - Our Transformers are "Auto Formers"
which allows us to use smaller magnetics (-30% to -50%) yielding increased eīƒ³ciency. Turn ratios are improved
due to series connections between the primary and secondary taps meaning MORE Power !
ā€¢ Smart Engageā„¢ Technology - Patent NĀ°: US06556683 - The amp switches on and oīƒ² automatically when
connected with high level inputs. No need for a remote turn on wire from under the dashboard. No need to
remove the head unit. Thanks MTX !
ā€¢ Bi-Level Inputs - High level inputs (Speaker cables) and line level inputs (RCA) utilize the same RCA type input
connections on the amp.
ā€¢ 10mm2 Speaker Connectors - Two sets of speaker terminals are provided for dual woofer or dual voice coil
applications. The two (+) connectors are paralleled internally. Same for the two (-) connectors.
ā€¢ Dual 50mm2 Power Connectors - For maximum voltage and current transfer, MTX mono blocks are equipped
with MASSIVE 50mm2 power connectors. It takes BIG power to make BIG power!
ā€¢ EBC - (External Bass Control) - A 6m remote sub control allowing you to īƒ¶ne tune bass levels every 2 seconds
from the driver seat with no need to scroll through complex head unit menus. Cool !
Ownerā€™s Manual - TH4000D
Control Panel :
Gain Control - The gain control matches the input sensitivity of the ampliīƒ¶er to the source unit being used. The
operating range varies from 100mv to 6V.
Adjusting the gain
1. Turn the gain control on the ampliīƒ¶er all the way down (counter clockwise).
2. Turn up the volume control on the source unit to approximately 3ā„4 of maximum.
3. Adjust the gain control on the ampliīƒ¶er until audible distortion occurs.
4. Adjust the gain control down until audible distortion disappears.
5. The ampliīƒ¶er is now calibrated to the output of the source unit.
Warning : Never adjust the gain control without a subwoofer connected.
This will damage the amp...
Low Pass X-Over Frequency Control - Used to select the desired LP x-over frequency. The frequency is adjustable
from 40Hz to 200Hz.
Subsonic Frequency Control - Used to select the desired subsonic frequency (high pass). The frequency can be
adjusted from 20Hz to 50Hz. The subsonic īƒ¶lter protects subwoofer(s) against low frequencies that can cause
damage. Very useful with vented enclosures.
Phase switch - Used to match the bass from subwoofers and front speakers. Toggle the phase switch from 0Ā° to
180Ā°. Keep the loudest bass response. Also useful in bridge mode.
Power On LED - The LED illuminates red when the amp is switched on. For
Short or Thermal protection, see points 9 and 10
Connectors panel :
RCA Inputs - These RCA inputs are used with source units that have RCA or
Line level outputs. (Source units need a minimum level of 100mV output for
proper operation of the ampliīƒ¶er).
MTX recommends only high quality twisted pair cables (such as StreetWires)
to decrease the possibility of radiated noise entering the system.
High Level Inputs :
MTX ampliīƒ¶ers allow high level inputs through RCA type input connections.
Simply connect the head unit speaker leads to the provided adapters
Control Panel (Top)
Connectors Panel (Side)
High level inputs
through RCA
Adaptors
included
To Head
Unit
Speakers


Produktspezifikationen

Marke: Mtx Audio
Kategorie:
Modell: th4000d

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mtx Audio th4000d benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Mtx Audio

Bedienungsanleitung

Neueste Bedienungsanleitung fĆ¼r -Kategorien-