Moxa NPort Express DE-311 Bedienungsanleitung

Moxa WLAN-Repeater NPort Express DE-311

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Moxa NPort Express DE-311 (6 Seiten) in der Kategorie WLAN-Repeater. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/6

P/N: 1802003114403

*1802003114403*

NPort DE- 311 Series

Quick Installation Guide

Vers 20ion January 5.2, 21

Technical Support Contact Information

www.moxa.com/support



2 . A 20 1 Moxa Inc ll rights reserved.

- - 2

Overview

Welcome to Moxa’s - -NPort Express DE 311, a compact palm sized data

communication device that allows you to control RS-232/422/485 serial

devices over a TCP/IP based Ethernet . network

Package Checklist

Before installing the DE-311, verify that the package contains the

following items:

• - u s d s NPort DE 311 niversal erial evice erver

• a er Mini dapt

• Quick installation guide (printed)

• Warranty card

Optional Accessories

• - -r , DK 35A (for 35 mm DIN ail includes 4 screws)

Please notify your sales representative if any of the above items is

missing or damaged.

Hardware Introduction

- - 3

Reset Button—Hold the reset button down to erase the password or load

the factory defaults, depending on how long the button is held down:

• 3 seconds to erase the password

The ready LED will flash every half-second when the password has

been erased. You may release the reset button at this time.

• 10 seconds to load factory defaults

The ready LED will flash five times every second when the factory

defaults have been loaded. You may release the reset button at this

time.

LED Indicators— There are three LED indicators on the top panel:

LED Name

LED Color

LED Function

PWR

R ed

Power is on

O ff

Power is off, or power error condition exists

Link

O range

10 Mbps Ethernet connection

G reen

100 Mbps Ethernet connection

O ff

Ethernet cable is disconnected, or has a short

Ready

G reen

System is ready

O ff

System error

Hardware Installation

Placement Options

You may place the unit on

a desktop or other

horizontal surface.

You

may also make use of the

DIN

-rail or wall mount

options, as illustrated

here.

Wall Mount

DIN- Rail

DIP Switch

The top panel contains the following table, which explains the DIP switch

settings for the serial port. The DIP switches are located at the rear panel.

SW1

Serial Connection

SW2

SW3

Interface Mode

RS- 232 Console

–

OFF Data Comm

OFF

RS- 232

OFF

RS- 422

OFF

2- - wire RS 485 by RTS

2- - wire RS 485 by ADDC

SW1 is used to activate the serial console. When SW1 has been changed,

the unit will reboot to initialize the new setting. You will need to wait for

the green Ready LED to turn off and then on again, which indicates that

serial console mode has been activated or deactivated. SW2 and SW3 are

used to select the serial port interface. (Note that RTS stands for Ready

To Send and ADDC stands for Automatic Data Direction Control.)

Produktspezifikationen

Marke:	Moxa
Kategorie:	WLAN-Repeater
Modell:	NPort Express DE-311
Breite:	67 mm
Tiefe:	100.4 mm
Gewicht:	480 g
Produktfarbe:	Weiß
Höhe:	22 mm
Betriebstemperatur:	0 - 55 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Typ:	Netzwerksender & -empfänger
Temperaturbereich bei Lagerung:	-40 - 85 °C
Mittlere Betriebsdauer zwischen Ausfällen (MTBF):	225529 h
Verkabelungstechnologie:	10/100Base-T(X)
Maximal mögliche Übertragungsstrecke:	- m
Temperatur Betriebsumgebung:	32 - 131 °F
Auto MDIX IEEE:	Ja