Moxa ioLogik E1241 Bedienungsanleitung

Moxa WLAN-Repeater ioLogik E1241

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Moxa ioLogik E1241 (105 Seiten) in der Kategorie WLAN-Repeater. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/105

ioLogik E1200 Series User’s Manual

Tenth Edition, April 2013

www.moxa.com/product

Reproduction without permission is prohibited.

ioLogik E1200 Series User’s Manual

The software described in this manual is furnished under a license agreement and may be used only in accordance with

the terms of that agreement.

Reproduction without permission is prohibited.

Trademarks

The MOXA logo is a registered trademark of Moxa Inc.

All other trademarks or registered marks in this manual belong to their respective manufacturers.

Disclaimer

Information in this document is subject to change without notice and does not represent a commitment on the part of

Moxa.

Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited

to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the

products and/or the programs described in this manual, at any time.

Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for

its use, or for any infringements on the rights of third parties that may result from its use.

This product might include unintentional technical or typographical errors. Changes are periodically made to the

information herein to correct such errors, and these changes are incorporated into new editions of the publication.

Technical Support Contact Information

www.moxa.com/support

Moxa Americas

Toll

- free: +1- - -888 669 2872

Tel:

- - -+1 714 528 6777

Fax:

- - -+1 714 528 6778

Moxa China (Shanghai office)

Toll

- free: +86 800 820 5036- - -

Tel:

- - - +86 21 5258 9955

Fax:

- - -+86 21 5258 5505

Moxa Europe

Tel:

- - -0 +49 89 3 70 03 99

Fax: - - -+49 89 3 70 03 99 99

Moxa Asia

-Pacific

Tel:

-2- - +886 8919 1230

Fax: -2- -+886 8919 1231

Moxa India

Tel:

- - - +91 80 4172 9088

Fax:

- - -+91 80 4132 1045

Table of Contents

1. Introduction ...................................................................................................................................... 1-1

Product Features ................................................................................................................................ 1-2

Inside the Box .................................................................................................................................... 1-2

Product Model Information ................................................................................................................... 1-3

Product Specifications ......................................................................................................................... 1-4

Common Specifications ................................................................................................................ 1-4

ioLogik E1210 ............................................................................................................................. 1-5

ioLogik E1211 ............................................................................................................................. 1-5

ioLogik E1212 ............................................................................................................................. 1-6

ioLogik E1213 ............................................................................................................................. 1-7

ioLogik E1214 ............................................................................................................................. 1-8

ioLogik E1240 ............................................................................................................................. 1-9

ioLogik E1241 ............................................................................................................................. 1-9

ioLogik E1242 ........................................................................................................................... 1-10

ioLogik E1260 ........................................................................................................................... 1-11

ioLogik E1262 ........................................................................................................................... 1-11

Physical Dimensions .......................................................................................................................... 1-12

Hardware Reference .......................................................................................................................... 1-13

Panel Guide .............................................................................................................................. 1-13

Ethernet Port ............................................................................................................................ 1-13

LED Indicators .......................................................................................................................... 1-13

I/O Circuit Diagram ........................................................................................................................... 1-14

DI Circuit ................................................................................................................................. 1-14

Sinking DO Circuit ..................................................................................................................... 1-14

Sourcing DO Circuit ................................................................................................................... 1-15

DIO Circuit ............................................................................................................................... 1-16

Relay Circuit ............................................................................................................................. 1-17

AI Circuit .................................................................................................................................. 1-17

RTD Circuit ............................................................................................................................... 1-18

TC Circuit ................................................................................................................................. 1-18

2. Initial Setup ...................................................................................................................................... 2-1

Hardware Installation .......................................................................................................................... 2-2

Connecting the Power .................................................................................................................. 2-2

Grounding the ioLogik E1200 ........................................................................................................ 2-2

DIN Rail, Wall Mounting ............................................................................................................... 2-2

Connecting to the Network ........................................................................................................... 2-3

Jumper Settings (DIO and AI) ....................................................................................................... 2-3

DIO Mode Configuration Settings ........................................................................................... 2-4

AI Mode Configuration Settings .............................................................................................. 2-4

EXT Power Configuration Settings (ioLogik E1213 Only) ............................................................ 2-4

I/O Wiring Diagrams .................................................................................................................... 2-5

ioSearch™ Installation ......................................................................................................................... 2-7

Load Factory Default Settings ............................................................................................................... 2-7

3. Using the Web Console ...................................................................................................................... 3-1

Introduction to the Web Console ........................................................................................................... 3-2

Overview ........................................................................................................................................... 3-3

Network Settings for the Web Console ................................................................................................... 3-4

General Settings ......................................................................................................................... 3-4

Ethernet Configuration ................................................................................................................. 3-4

User- Defined Modbus Addressing.......................................................................................................... 3-5

Default Modbus Address ............................................................................................................... 3-5

Active OPC Server Settings .................................................................................................................. 3-6

Tag Generation ................................................................................................................................... 3-6

I/O Settings ....................................................................................................................................... 3-8

DI Channels ................................................................................................................................ 3-8

DO Channels ............................................................................................................................. 3-10

AI Channels .............................................................................................................................. 3-11

AI Input Range ......................................................................................................................... 3-12

AO Channels ............................................................................................................................. 3-14

RTD Channels ........................................................................................................................... 3-15

TC Channels ............................................................................................................................. 3-17

System Management ......................................................................................................................... 3-18

Accessibility IP List .................................................................................................................... 3-18

Network Connection................................................................................................................... 3-19

Firmware Update ....................................................................................................................... 3-19

Import System Configuration Settings ......................................................................................... 3-19

Export System Settings .............................................................................................................. 3-20

Peer- - 3-to Peer Networking.................................................................................................................... 20

Peer- - -to Peer Settings (1 50)....................................................................................................... 3-20

Sample Peer Peer Configuration-to- .............................................................................................. 3-21

Server Settings: ................................................................................................................ 3-21

Client Settings: .................................................................................................................. 3-21

DO Safe Mode Settings .............................................................................................................. 3-22

AO Safe Mode Settings ............................................................................................................... 3-22

SNMP .............................................................................................................................................. 3-22

SNMP Trap ............................................................................................................................... 3-22

Standard Trap ................................................................................................................... 3-22

Private Trap ...................................................................................................................... 3-23

Using SNMP .............................................................................................................................. 3-23

SNMP Agent ...................................................................................................................... 3-23

SNMP Trap Settings ............................................................................................................ 3-23

SNMP Trap Server .............................................................................................................. 3-23

SNMP Trap ........................................................................................................................ 3-24

Specific ID ........................................................................................................................ 3-24

Digital Input / Counter Trap Settings .................................................................................... 3-24

Digital Output / Pulse Output Trap Settings ........................................................................... 3-24

Analog Input Trap Settings .................................................................................................. 3-25

RTD Input Trap Settings ..................................................................................................... 3-26

TC Input Trap Settings ....................................................................................................... 3-26

Change Password ............................................................................................................................. 3-27

Load Factory Defaults ........................................................................................................................ 3-28

Save/Restart .................................................................................................................................... 3-28

4. Using ioSearch™ ................................................................................................................................ 4-1

Introduction to ioSearch™ ................................................................................................................... 4-2

ioSearch™ Main Screen ....................................................................................................................... 4-2

Main Screen Overview .................................................................................................................. 4-2

ioSearch™ Setup ................................................................................................................................ 4-3

System ...................................................................................................................................... 4-3

Sort ........................................................................................................................................... 4-4

Quick Links ................................................................................................................................. 4-4

Main Function ..................................................................................................................................... 4-4

Locate ........................................................................................................................................ 4-5

Firmware Upgrade ....................................................................................................................... 4-5

Batch Upgrades on Multiple Devices of the Same Model ............................................................ 4-5

Unlock ....................................................................................................................................... 4-5

Import ....................................................................................................................................... 4-6

Export ........................................................................................................................................ 4-6

Change IP Address ...................................................................................................................... 4-7

Batch TCP/IP Configuration on Multiple Devices ............................................................................... 4-7

Restart System ........................................................................................................................... 4-8

Reset to Default .......................................................................................................................... 4-8

Mass Deployment (Import) ........................................................................................................... 4-9

Mass Deployment (Export) ........................................................................................................... 4-9

5. Active OPC Server ............................................................................................................................. 5-1

Introduction to Active OPC Server ......................................................................................................... 5-2

OLE for Process Control ................................................................................................................ 5-2

Active O From Pull to PushPC Server— ............................................................................................ 5-3

Features of Active OPC Server .............................................................................................................. 5-5

One Simple Click Creates Active Tags ............................................................................................ 5-5

Faster, More Accurate Data Collection than Traditional “Pull Technology” ............................................ 5-5

Dynamic IP Assignments for Cellular RTUs ...................................................................................... 5-6

Active OPC Server Setup ..................................................................................................................... 5-6

Installing Active OPC Server ......................................................................................................... 5-6

Main Screen Overview .................................................................................................................. 5-7

Menu Bar ................................................................................................................................... 5-7

A. Modbus/TCP Default Address Mappings ............................................................................................ A-1

E1210 Modbus Mapping ....................................................................................................................... A-2

0xxxx Read/Write Coils (Functions 1, 5, 15) ............................................................................ A-2

1xxxx Read Only Coils (Function 2) ........................................................................................ A-4

3xxxx Read Only Registers (Function 4) .................................................................................. A-4

E1211 Modbus Mapping ....................................................................................................................... A-5

0xxxx Read/Write Coils (Functions 1, 5, 15) ............................................................................ A-5

1xxxx Read Only Coils (Function 2) ........................................................................................ A-6

E1212 Modbus Mapping ....................................................................................................................... A-7

0xxxx Read/Write Coils (Functions 1, 5, 15) ............................................................................ A-7

1xxxx Read Only Coils (Function 2) ...................................................................................... A-10

3xxxx Read Only Registers (Function 4) ................................................................................ A-11

4xxxx Read/Write Registers (Functions 3, 6, 16) .................................................................... A-11

E1213 Modbus Mapping ..................................................................................................................... A-11

0xxxx Read/Write Coils (Functions 1, 5, 15) .......................................................................... A-11

1xxxx Read Only Coils (Function 2) ...................................................................................... A-13

3xxxx Read Only Registers (Function 4) ................................................................................ A-14

4xxxx Read/Write Registers (Functions 3, 6, 16) .................................................................... A-14

E1214 Modbus Mapping ..................................................................................................................... A-15

0xxxx Read/Write Coils (Functions 1, 5, 15) .......................................................................... A-15

1xxxx Read Only Coils (Function 2) ...................................................................................... A-16

3xxxx Read Only Registers (Function 4) ................................................................................ A-17

4xxxx Read/Write Registers (Functions 3, 6, 16) .................................................................... A-17

E1240 Modbus Mapping ..................................................................................................................... A-17

0xxxx Read/Write Coils (Functions 1, 5, 15) .......................................................................... A-17

3xxxx Read Only Registers (Function 4) ................................................................................ A-17

3xxxx Read Only Registers (Function 4) ................................................................................ A-19

E1241 Modbus Mapping ..................................................................................................................... A-19

0xxxx Read/Write Coils (Functions 1, 5, 15) .......................................................................... A-19

3xxxx Read Only Registers (Function 4) ................................................................................ A-20

4xxxx Read/Write Registers (Functions 3, 6, 16) .................................................................... A-20

E1242 Modbus Mapping ..................................................................................................................... A-20

0xxxx Read/Write Coils (Functions 1, 5, 15) .......................................................................... A-20

1xxxx Read Only Coils (Function 2) ...................................................................................... A-21

3xxxx Read Only Registers (Function 4) ................................................................................ A-22

4xxxx Read/Write Registers (Functions 3, 6, 16) .................................................................... A-23

E1260 Modbus Mapping ..................................................................................................................... A-23

0xxxx Read/Write Coils (Functions 1, 5, 15) .......................................................................... A-23

3xxxx Read Only Registers (Function 4) ................................................................................ A-23

E1262 Modbus Mapping ..................................................................................................................... A-24

3xxxx Read Only Registers (Function 4) ................................................................................ A-24

B. Network Port Numbers...................................................................................................................... B-1

C. Factory Default Settings .................................................................................................................... C-1

D. Pinouts .............................................................................................................................................. D-1

E. FCC Interference Statement .............................................................................................................. E-1

F. European Community (CE) ................................................................................................................ F-1

ioLogik E1200 Series Introduction

1-3

Product Model Information

Model Description

ioLogik E1210 - Remote Ethernet I/O with 2 port Ethernet switch and 16 DIs

ioLogik E1211 - Remote Ethernet I/O with 2 port Ethernet switch and 16 DOs

ioLogik E1212

Remote Ethernet I/O with 2 port Ethernet switch, 8 DIs, and 8 DIOs-

ioLogik E1213 tch, 8 DIs, 4 DOs, and 8 DIOs (source -pRemote Ethernet I/O with 2 ort Ethernet swi

t ype)

ioLogik E1214 - Remote Ethernet I/O with 2 port Ethernet switch, 6 DIs, and 6 relays

ioLogik E1240 Remote Ethernet I/O with 2 port Ethernet switch and 8 AIs-

ioLogik E1241

Remote Ethernet I/O with 2 port Ethernet switch and 4 AOs-

ioLogik E1242 - Remote Ethernet I/O with 2 port Ethernet switch and 4 AIs, 4DIs, and 4DIOs

ioLogik E1260 - Remote Ethernet I/O with 2 port Ethernet switch and 6 RTDs

ioLogik E1262 - Remote Ethernet I/O with 2 port Ethernet switch and 8 TCs

ioLogik E1210-T - -Ethernet remote I/O with 2 port Ethernet switch and 16 DIs, 40 to 75°C operating

temperature

ioLogik E1211-T - -Ethernet remote I/O with 2 port Ethernet switch and 16 DOs, 40 to 75°C operating

temperature

ioLogik E1212-T - -Ethernet remote I/O with 2 port Ethernet switch, 8 DIs, and 8 DIOs, 40 to 75°C

operating temperature

ioLogik E1213 8 DIOs (-T Remote Ethernet I/O with 2 Port Ethernet switch, 8 DIs, 4 DOs, and source

t - ype), 40 to 75°C operating temperature

ioLogik E1214-T - -Ethernet remote I/O with 2 port Ethernet switch, 6 DIs, and 6 Relays, 40 to 75°C

operating temperature

ioLogik E1240-T - -Ethernet remote I/O with 2 port Ethernet switch and 8 AIs, 40 to 75°C operating

temperature

ioLogik E1241-T - -Ethernet remote I/O with 2 port Ethernet switch and 4 AOs , 40 to 75°C operating

temperature

ioLogik E1242-T -Ethernet remote I/O with 2 port Ethernet switch, 4 AIs, 4 DIs, and 4 DIOs, -40 to 75°C

operating temperature

ioLogik E1260-T - -Ethernet remote I/O with 2 port Ethernet switch and 6 RTDs, 40 to 75°C operating

temperature

ioLogik E1262-T - -Ethernet remote I/O with 2 port Ethernet switch and 8 TCs, 40 to 75°C operating

temperature

ioLogik E1200 Series Introduction

1-7

ioLogik E1213

Inputs and Outputs

Digital Inputs:

8 channels

Digital Outputs:

4 channels

Digital Input/Output (configurable by jumper):

4 channels

Isolation:

3K VDC or 2K Vrms

Digital Input

Sensor Type:

NPN, PNP, and dry contact

I/O Mode:

DI or event counter

Dry Contact:

• Logic 0: short to GND

• Logic 1: open

Wet Contact:

• Logic 0: 0 to 3 VDC

• Logic 1: 10 to 30 VDC (DI COM to DI)

Common Type:

12 points per COM

Counter/Frequency:

250 Hz, power off storage

Digital Output

I/O Mode:

DO or Pulse Output

I/O Type:

Source

Current:

500 mA per channel

Voltage:

15 to 30 VDC (12 or 9 VDC configurable by jumper on the 4 DO channels)

Pulse Wave Width/Frequency:

1 ms/500 Hz

Over

-Voltage Protection: 45 VDC

Over

- Current Limit: 1.5 A per channel @ 25°C

Over

-Temperature Shutdown: 175°C (typical), 150°C (min.)

Output Current Rating:

0.5A per channel

Power Requirements

Power Input:

24 VDC nominal, 12 to 36 VDC

Power Consumption:

130 mA typical @ 24 VDC

Produktspezifikationen

Marke:	Moxa
Kategorie:	WLAN-Repeater
Modell:	ioLogik E1241
Breite:	27.8 mm
Tiefe:	84 mm
Gewicht:	200 g
Produktfarbe:	Silber
Höhe:	124 mm
AC Eingangsspannung:	24 V
Betriebstemperatur:	-40 - 75 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Zertifizierung:	UL/cUL Class I Division 2, ATEX Zone 2
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Typ:	Netzwerksender & -empfänger
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-40 - 85 °C
Mittlere Betriebsdauer zwischen Ausfällen (MTBF):	888656 h
Ausgangsstrom:	0.2 A
Ausgangsspannung:	4 V
Eingangsstrom:	0.194 A
Verkabelungstechnologie:	10/100Base-T(X)
Maximal mögliche Übertragungsstrecke:	- m
Höhe bei Betrieb:	0 - 2000 m