Morley 20/20 POWER WAH Bedienungsanleitung

Morley Nicht kategorisiert 20/20 POWER WAH

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Morley 20/20 POWER WAH (1 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
THANK YOU FOR CHOOSING A MORLEY 20/20 POWER WAH VOLUME.
YOU NOW OWN THE BEST PEDAL MADE!
Please take a few minutes to familiarize yourself with the features of your new pedal.
We hope you enjoy using it as much as we enjoyed building it.
ABOUT OUR BUFFER CIRCUIT:
All Morley 20/20 pedals come equipped with our Buffer Circuit. This circuit prevents volume loss or tone
change to the instrument. It also allows the use of long cables or pedals boards with lots of pedals and
connection cables. You’ll sound and feel better GUARANTEED!
ABOUT OUR OPTICAL CIRCUITRY:
Optical design ensures smooth pedal control of Wah, volume and/or switching that won’t get scratchy and
wear out like potentiometer (pot) controlled pedals.
ABOUT THE CONNECTIONS:
9V: ONLY Morley's 9VDC 300 milliamp regulated adapter should be used.
IN: Input jack. Plug instrument into this jack using 1/4" guitar cable.
OUT: Connect amplifier to this jack using a 1/4" guitar cable.
USING AN AC ADAPTER:
All Morley pedals use Morley's 9VDC 300 milliamp regulated adapter. Center pin polarity is negative.
Using a non-regulated adapter could cause a low frequency hum in your amplifier. Using an adapter with
the wrong polarity may damage the pedal.
USING A BATTERY:
All Morley pedals are designed to use one 9V battery when not using an adapter. We suggest you use a
good quality alkaline battery. To prolong battery life, unplug your cord completely from the input jack when
not using the pedal. When the pedal is not used for extended periods, remove the battery from the pedal.
Our Quick Clip” Bettery door allows easy access to battery compartment.
WARRANTY
All Morley® pedals are warranted for one year with copy of dated purchase receipt. To obtain warranty
service, contact store where pedal was purchased or email service@morleyproducts.com
Lifetime warranty is available at no charge, register at www.morleyproducts.com
20/20 POWER WAH VOLUME FEATURES (MODEL MTPWOV):
·
·
·
·
· SWITCHED WAH: Stomp switch switches between Wah and
volume. You can use Wah as tone filter by leaving in desired
position. Volume level can be set by leaving pedals in any desired
position. Silent switching prevents switch noise from coming
out of amp.
·
·
·
·· WAH BOOST: Allows you to adjust Wah Level up to 20dB
MTPWOV SPECIFICATIONS:
Power: 9V Battery or 9VDC 300mA regulated (center negative)
Indicator (right): Wah Mode LED on, Volume Mode LED off
Dimensions: 6.75" L x 4.5" W x 2.75" H
Current Draw: 6 mA @ 9VDC
Weight: 2 lb./ 0.92 kg
www.morleyproducts.com
Corvette Yellow Base
Glow-In-The-Dark Treadle Grip
Glow-In-The-Dark Toe End Logo


Produktspezifikationen

Marke: Morley
Kategorie: Nicht kategorisiert
Modell: 20/20 POWER WAH

Brauchst du Hilfe?

Wenn Sie Hilfe mit Morley 20/20 POWER WAH benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Morley

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-