Mooer Noise Killer Bedienungsanleitung

Mooer Nicht kategorisiert Noise Killer

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Mooer Noise Killer (1 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
Main Features
2 Working Modes: Hard/Soft
Full metal shell
Very small and compact design
True bypass switch
DC 9V adapter power supply
Hard: Provide hard effect of noise reduction.
Soft: Provide soft effect of noise reduction.
THRESHOLD
Hard
Soft
3
4
5
6
7
Noise Reduction Pedal
6. Mode Switch:
1. TRUE BYPASS Footswitch:
Push down the footswitch to toggle
between on and bypass status.
2. ON/OFF LED:
3. DC IN Power Jack:
For power supply, use a 9-volt
DC regulated AC adapter (plug
polarity is positive on the barrel
and negative in the center).
4. INPUT Jack:
1/4 mono audio jack, for connecting ”
guitar.
5. OUTPUT Jack:
1/4” mono audio jack, outputs the signal.
Inp ut: 1/4 monau ral jack (impedance: 1M Ohms)”
Output: 1/4 monaural jack (impedance: 100 Ohms)”
Power Requirements: AC adapter 9V DC (center minus plug),
recommended to use Mooer Micro Power
Current Draw: 26 mA
Dimensions: 93.5mm (D) 42mm (W) Ă— Ă— 52mm (H)
Weight: 160g
Acces sories: Own er ’s Manual
* Disclaimer: Any specification’s update won't be amended in this manual.
Switch between Hard and Soft mode.
7. THRESHOLD Knob:
Adjusts the threshold of the noise
reduction.
Shows the on/off status of Noise
Killer, when the LED is lit the
effect is engaged.
Effects Modes: 2 (Hard/Soft)
PLEASE READ CAREFULLY BEFORE PROCEEDING
Power Supply
Connections
Always turn off the power of this and all other equipment before connecting or
disconnecting, this will help prevent malfunction and / or damage to other d evices.
Also make sure to disconnect all connection cables and the power cord before
moving this unit.
Cleaning
Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth.
Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax, sol vents,
cleaning fluids, or chemical-impregnated wiping cloths.
Interference with other electrical devices
Radios and televisions placed nearby may experience reception interference.
Operate this unit at a suitable distance from radios and televisions.
Location
To avoid deformation, discoloration, or other serious damage, do not expose
this unit to the following conditions:
Direct sunlight Heat sources
Magnetic fields Extreme temperature or humidity
Excessive dusty or dirty location High humidity or moisture
Strong vibrations or shocks
Please connect the designated AC adapter to an AC outlet of the correct voltage.
Please be sure to use only an AC adapter which supplies 9V (±10%) DC, center
minus. Th e maximum working voltage shall not exceed 12V, other wise may be
dangerous equipment damage, fire or other problems.
Unplug the AC power adapter when not using or during electri cal storms.
Precautions
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference
that may cause undesired operation.


Produktspezifikationen

Marke: Mooer
Kategorie: Nicht kategorisiert
Modell: Noise Killer

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mooer Noise Killer benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Mooer

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-