Mooer Micro Power Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Mooer Micro Power (1 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
Dimensions: 93.5mm (D) 42mm (W) 36mm (H)
Weight: 140g
* Disclaimer: Any specifications update won't be amended in this manual.
Provide stable 9V DC power supply with high performance, each
output maximum current of 300 mA, can meet most of the pedal
use requirement.
Eight independent output short circuit protection design, when one
circuit output failure, other output lines still can work independently.
8 LED lights indicating output status in darkness, its unique
dull-polished feature can also protect your eyes from spotlights
on stage.
Very small and exquisite, full metal shell.
1.INPUT POWER LIGHT:
12V DC input: when connect the power supply, the red light is lit up.
2.OUTPUT POWER LIGHT:
Eight-way output power light distribution in two side, when the power
cord access in any way, the corresponding indicator lights up.
3.INPUT POWER JACK:
Connect the input power.
4.OUTPUT POWER JACK:
Connect the DC, connected with the pedal power supply.
If the input polarity of the electrical device is , please connect
the DC power cable to the device directly.
NOTE
Before use, please confirm the equipment is the same polarity with the
power adapter, otherwise may cause damage.
If the input polarity of the electrical device is , please connect
polarity reversal cable to the DC power cable, then connect the device.
Power supply: 12V power adapter
Output current: Eight 9V power supply output independently
Current draw: Each current of 300 mA, not more than the current of
the input power adapter. (If using the Mooer Power
adapter, then the current is 2A)
The 12V power adapter 1 (12V 2A)
460mm lines 4 (connect the pedal)
610mm lines 4 (connect the pedal)
200mm Polar conversion line (The output power from the negative is
changed to outside to inside is outside negative)
Velcro tape
Owner s Manual
Accessorles
Connect instructions
Short circuit protection function: When a short circuit or current channel
output connected device when more than 300 mA, will automatically disconnect,
indicator light will turn off. then the power equipment and single block after
disconnection, the output channel will automatically restored.
Multi-Power Supply
× ×
×
×
×
Main Features
PLEASE READ CAREFULLY BEFORE PROCEEDING
Power Supply
Connections
Always turn off the power of this and all other equipment before connecting or
disconnecting, this will help prevent malfunction and / or damage to other devices.
Also make sure to disconnect all connection cables and the power cord before
moving this unit.
Cleaning
Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth.
Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax, solvents,
cleaning fluids, or chemical-impregnated wiping cloths.
Interference with other electrical devices
Radios and televisions placed nearby may experience reception interference.
Operate this unit at a suitable distance from radios and televisions.
Location
To avoid deformation, discoloration, or other serious damage, do not expose
this unit to the following conditions:
Direct sunlight Heat sources
Magnetic fields Extreme temperature or humidity
Excessive dusty or dirty location High humidity or moisture
Strong vibrations or shocks
Please connect the designated AC adapter to an AC outlet of the correct voltage.
Please be sure to use only an AC adapter which supplies 12V (±10%) DC, center
minus. The maximum working voltage is 15V, any voltage higher than this will
cause dangerous damage like explosion to the equipment itself.
Unplug the AC power adapter when not using or during electrical storms.
Precautions
FCC certification
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference
that may cause undesired operation.


Produktspezifikationen

Marke: Mooer
Kategorie: Nicht kategorisiert
Modell: Micro Power

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mooer Micro Power benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Mooer

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-