Mooer Micro Buffer Bedienungsanleitung

Mooer Nicht kategorisiert Micro Buffer

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Mooer Micro Buffer (1 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
1. TRUE BYPASS Footswitch:
Push down the footswitch to toggle
between on and bypass status.
2. ON/OFF LED:
3. DC IN Power Jack:
For power supply, use a 9-volt
DC regulated AC adapter (plug
polarity is positive on the barrel
and negative in the center).
4. INPUT Jack:
1/4 mono audio jack, for connecting ”
guitar.
5. OUTPUT Jack:
1/4” mono audio jack, outputs the signal.
* Disclaimer: Any specification’s update won't be amended in this manual.
Shows the on/off status of Micro Buffer,
when the LED is lit the
effect is engaged.
Full metal shell
Very small and compact design
True bypass switch
DC 9V adapter power supply
Main Features
PLEASE READ CAREFULLY BEFORE PROCEEDING
Power Supply
Connections
Always turn off the power of th is and all other equipment before c onnecting or
disconnecting, this will help prevent mal function and / or damage t o other devices.
Also make sure to discon nect all connection c ables and the power cord before
moving this unit.
Cleaning
Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth.
Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax, solvents,
cleaning fluids, or chemical- impregna ted wiping c loths.
Interference with other electrical devic es
Radios and t elevisio ns placed nearby may experience reception i nterfere nce.
Operate th is unit at a sui table distance from ra dios and television s.
Location
To avoid deform ation, dis colorati on, or other serious dam age, do not expose
this unit to t he following conditi ons:
Direct sunlight Heat sourc es
Magnetic fields Extreme temperature or humidity
Excessiv e dusty or dirty locatio n High humidity or moisture
Strong vibrations or shocks
Please connect the designated AC a dapter to an AC o utlet of the correct vol tage.
Please be sure to use only a n AC adapter whi ch supplie s 9V (±10%) DC, center
minus. The maximum workin g voltage sh all not exceed 12V, otherwise may be
dangerous equipme nt damage, fire or other problems.
Unplug the AC power adapter when not using or during electrical storms .
Precautions
Buf fer Pedal
Accurate copy of the input signal frequency and removal of unconven-
tional signal frequency, which perfectly output the original signal to
the next pedal, resulting in the original musical sound
5
4
3
76
8
8 BOOST Knob: . Add up to +6dB of gain to buffered signal.
6. LOW CUT Switch:
When the switch is on, cuts bottom
end frequencies of buffered signal.
7. HIGH CUT Switch :
When the switch is on, cuts top end
frequencies of buffered signal.
Low Cut Frequency: 140Hz
High Cut Frequency: 4.5kHz
Input: 1/4 monaural jack (impedance: 1M Ohms)”
Output: 1/4 monaural jack (impedance: 120 Ohms)”
Power Requirements: AC adapter 9V DC (center minus plug),
recommended to use Mooer Micro Power
Current Draw: 20 mA
Dimensions: 93.5mm (D) 42mm (W) Ă— Ă— 52m m (H)
Weight: 145g
Accessories: Owner’s Manual
FCC certification
This devic e complies with Part 15 of the FCC Rules. Operati on is subject
to the following two con ditions :
This d evice may not cause harmful interference.
This device must accept any interference received, including interference
that may cause undesired operati on.
Equipped with a High-cut & Low-cut switch and a Boost knob, making
the Micro Buffer feature richer and more convenient to use


Produktspezifikationen

Marke: Mooer
Kategorie: Nicht kategorisiert
Modell: Micro Buffer

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mooer Micro Buffer benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Mooer

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-