Mooer Free Step Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Mooer Free Step (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Specification
Input: ( 1/4” mono audio jack. Impedance: 1M Ohms
Output: ( 1/4” mono audio jack Impedance: 100 Ohms
Power requirements: 9V DC, center negative.
Current Draw: 70 mA
Dimensions: 154.5mm(D)×73mm(W)×53mm(H)
Weight: 540g
* Disclaimer: Any specifications update won't be amended
in this manual
Precautions
*Please read carefully before proceeding*
Interference with other electrical devices and Cleaning
Radios and televisions placed nearby may experience
reception interference.
Operate this unit at a suitable distance from radios
and televisions.
Clean only with a soft, dry cloth.
Heat sources
High humidity or moisture
Product description
The Mooer Free Step brings together a vintage analogue Wah
Wah and a very flexible volume control into one small, strong
and comfortable expression pedal.
In Wah mode you can activate the effect at the touch of your
sole using MOOERs innovative foot sensing circuit, or you
canoperate it using the more traditionaltoe down’ footswitch
method. Allowing you to leave it cocked in any position you
like as a filter. The custom inductor can be dialed in to your
favorite
Wah tone using the very convenient Q Range dial on the side
of the pedal.
In Volume mode the Free Step will stay faithful in retaining
every nuance and detail of your tone. It’s smooth, seamless
transition makes it a joy to use in any rig to control your volume.
The heel down (minimum volume) can be easily adjusted and
set anywhere in the range of 0%-50% using the handy min.
vol. dial on the side of the pedal.
All of this is wrapped up into an incredibly strong and sturdy
expression pedal which will survive for years and years of
even the roughest use.
Main Features
Doubles up as a Wah and Volume in one Pedal
MOOER’s custom inductor provides a truly delicious
Wah sound
Q Range control allows the user to dial in the Wah tone
Selectable foot sensing control or traditional ‘toe down’ on
and off operation in Wah mode
Smooth, seamless volume control
Retains every nuance and detail of your original tone
Wah and Volume pedal
FCC certification
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including
interference that may cause undesired operation.
Connections
Always turn off the power and all other equipment before
connecting or disconnecting. This will help prevent
malfunction and damage to any of the devices. Make sure
to unplug all connection cables and power cords before
moving this unit.
Power Supply
Please connect the designated AC adapter to an AC outlet
of the correct voltage. Please be sure to use only an AC
adapter which supplies 9V DC(±10%), , center
negative. Unplug the AC power adapter when not in use or
during electrical storms.
Location
To avoid deformation, discoloration, or other serious
damage,do not expose this unit to the following conditions
Direct sunlight
Magnetic fields
Excessively dusty or dirty location
Strong vibration or shock
Handling
Do not apply excessive force to the switches or controls.
Do not let paper, metal, or other objects into this unit.
Take care not to drop the unit, and do not subject it to shock
or excessive pressure.
Extreme temperature or humidity
Pedal Layout
2
1
3
4
5
1
6
10
87
9
VOL: Volume pedal only. In this mode freestep will behave like
any ordinary volume pedal. Heel down is minimum volume and
toe down is maximum volume. Minimum volume can be
adjusted between 0%-50% using the MIN VOL dial on the side
of the pedal
5. Pressure SENSOR pads:
Used for activating the wah in sensor setting
6. Touch Switch:
Footswitch for traditional toe down Wah ac tivation
7. MODE swit ch:
Change between the three modes.
Wah/Vol ume/Wah&Volume
8. SENSOR/SWITCH:
Change the activation method when in Wah mode.
9. Q Range dial:
Adjusts t he value of Q range to dial in t he sound
of your wah
10.MIN VOL dial:
Adjusts t he minimum v olume between 0%-50%
of the heel down position when in volume and
wah&volume mode.
1. Power LED:
Indicates the On/Off status and mode of Freestep.
(Red for Wah, Blue for Vol ume)
2. INPUT:
¼ inch audio input Jack
3. OUTPUT:
¼ inch audio output Jack
4. DC input:
Connect a 9v D C power supply centre pin negative
Connections
Connect your instrument to the freestep input using a
standard 1 /4" guitar jack cable.
Connect the output of freestep to the input of your
amplier, eff ects pedal s or other equipment usi ng a
standard 1 /4" guitar jack cable or connector
Connect a 9v DC power supply to the DC inp ut. Ensure
the polari ty is centre pin negative
Get your foo t on freestep, crank up the volume and have
fun!!!
MOOER AUDIO CO.,LTD
www.mooeraudio.com
MODES
Freestep h as 3 different modes which can be changed u sing
the "MODE switch" on the side of the pedal.
Wah: Wah effect only. You can op erate the wah with two
different methods in this m ode which ca n be changed u sing
the "SENSOR/SWITCH " control.
With this control in SENSOR position, simply place the
sole of your foot onto the pedals pressure sensor pads to
activate the effect.
Remove your foot to deactivate the effect.
With this control in the SWITCH position, lean forward
and apply slight pressure to the front of the pedal with your
foot while the pedal is in the full toe down position to push
the Touch Switch and activate the effect. The effect will
remain active until you use the same method to deactivate it.
Use the Q range dial to adjust the sound of the wah
effect
Part No:6200105 93
W&V: Wah an d Volume mode. In this mode freestep will act as
a volume pedal by default. To activate and deactiva te the wah
effect, use the second method described above in 'wah mode'.
The SENSOR /SWITCH control is inactive in this mode.
When in Volum e mode the LED's will illuminate blue.
When actively in wah mod e the LED's wi ll illuminate red.
(Heel down ) (Toe down)


Produktspezifikationen

Marke: Mooer
Kategorie: Nicht kategorisiert
Modell: Free Step

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mooer Free Step benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Mooer

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-