Mooer CT-01 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Mooer CT-01 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
放置场所
为防止变形、变色,及其他严重损坏,请避免以下情况:
湿
湿
电器干扰
在使用本机时,收音机和电视机可能会造成干扰。使用本机时要远离收音机
和电视机。
请使用干燥柔软的布清洁本机。如有必要,可用稍微湿润的布拭擦。
切勿使用粗糙的清洁粉、酒精、涂料稀释剂、蜡、溶剂、清洁剂及化学试剂
等浸渍抹布。
请勿暴力使用开关及控制元件。
请勿让纸屑、金属制品及其他物体落入机内。
注意不要摔落,不要使其受到冲击及过度压力。
电池供电
使的3V钮锂 (CR2032) 电池 进
精准、灵敏、快捷的夹式调音表,适合吉他和贝斯使用
高亮度的显示屏方便在黑暗的舞台环境使用
内置重力感应装置,180°自动切换方向
持 调435Hz - 445Hz
具备省电模式以及自动关机模式
精致摩登的外观与坚固耐用的结构完美融合
1. 半音
名半
2. 高准确显示:
示音确时
名上同时
3. 开机
短按打开或关闭调音表 长按进入调谐
式无 自动退3
4. 高偏移显示:
音名左边显示音高偏低,
边显
5. 显示
力感倒转示 无作后
进入省电待机模式 分钟后自动关机。10 2
6. 音名
十二平均律显示
7. 电池
安装 3V
8. 固定
固耐夹具
MAD E IN CHIN A
Bat tery : CR 2032 3V
CT
CT
CT
CT CT -
-
-
--01
01
01
0101
03
01
04
06
05
07
08
02
池供: 3V钮(CR2032
: 57 mm L X27mm W X8mm H
: 25g
件: 使用
*免责声明:参数更新恕不另行通知。
CT-01
1. 180调音表固定到乐器上,显示屏可 度打开方便看清调音情况。
2. LED下电源模式按钮 屏幕亮起,调音表进入开启状态。
3. 0 440Hz启状态下长按电源按钮可进入调谐模式,当屏幕显示为‘ 时表示当前为
 , ;按下按键循环切换- 至+5 5 示 至435Hz 445Hz 无操作 秒后自动退出调谐模式。3
4. Clip Tuner 10 2将会在无操作 秒后进入省电模式, 分钟后会自动关机节省电池电量消耗。
5. 户可自行在调弦模式下按下按键进行关机操作。
1. Semitone Display:
Indicates if the note is a flat or sharp.
MAD E IN CHIN A
Bat tery : CR 2032 3V
CT
CT
CT
CT CT-
-
-
--0
0
0
001
1
1
11
03
01
04
06
05
07
08
02
CT-01
Precautions
Power Supply
Please be sure to only use a 3V lithium button cell (Cr2032).
Cleaning
Clean with a soft, dry cloth. If necessary, slightly moisten the cloth.
Do not use abrasive cleansers, cleaning alcohol, paint thinners, wax, solvents,
cl eaning fluids, or chemical-impregnated wiping cloths.
Interference with other electrical devices
Radios and televisi ons placed nearby may experience reception interference.
Operate this unit at a suitable distance from radios and televisions.
Do not leave this product attached to your instrument when not in use as it could
damage the finish on some instruments, especially if while exposed to bright light
or hea t.
Location
Avoid le aving the CT01 Tuner in the following locations:
Direct sunlight
Magnetic fields
Excessively dusty or dirty areas
To avoid deformation, discoloration, or other serious damage, do not expose this
unit to the following conditions:
Heat sources
Extreme temperature or humidity
High humidity or moisture
PLEASE READ CAREFULLY BEFORE PROCEEDING
Features
Suitable for guitar and bass guitar
Fast, accurate tuning from 435 to 445Hz
180° rotatable hinge
Power saving mode and automatic shutdown
Bright, colorful display
Attach the tuner to the headstock or body of your instrument. The clamp can be
rotated up to 180° to find your preferred viewing angle.
• Power on the tuner by pressing the power button.
• Press and hold the power button in the ON state to adjust the tuning
frequency. When the screen displays “0, the tuner is set to 440HZ. You can
adjust the frequency from “-5” to “+5” or 435Hz to 445Hz, by pressing the power
button again. This mode will automatically exit after three seconds.
• Ad just the string to the target note as indicated on the pitch display. The note
is in tune when both indicator LEDs are simultaneously lit up.
• The tuner will enter power saving mode after 10 seconds. After 2 minutes,
CT01 will turn off automatically.
• The user can power it off manually by pressing the power switch.
2. Accurate Pitch Display:
Displays the current strings
target note. Both the upper and
lower indicator LED light up
simultaneously when correct
pitch is achieved.
3. Power Switch:
Press switch to power on/off.
Press and hold to adjust the tuning
frequency. It will automatically exit
after 3 seconds.
4. Pitch Offset Display:
Indicates if the target note is sharp
(above) or flat (below).
5. Screen:
The CTO1 tuner is gravity sensitive and
the display will always adjust to face the
proper direction, allowing you to mount
it as you wish.
6. Pitch Display:
Indicates the target note.
7. Battery Compartment:
Use 3V lithium cell battery only.
8. Retaining Clamp:
Stable and durable metal fixture with
180° rotatable hinge.
Layout
Instructions
Power requirements: 3V lithium cell (Cr2032)
Dimensions: 57 mm L X27mm W X8mm H( )
Weight: 25g
Accessories: Owners Manual
*Notes Any specification’s update will not be amended in this manual.
Specification
Clip-on Tuner


Produktspezifikationen

Marke: Mooer
Kategorie: Nicht kategorisiert
Modell: CT-01

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mooer CT-01 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Mooer

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-