Milwaukee M28 0730-22 Bedienungsanleitung
Milwaukee
Zaagmachine
M28 0730-22
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Milwaukee M28 0730-22 (32 Seiten) in der Kategorie Zaagmachine. Dieser Bedienungsanleitung war fĂĽr 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/32
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/milwaukee/m28-0730-22/html/bg1.png)
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
To reduce The risk of injury, user musT read and undersTand operaTor's
manual.
afin de réduire le risque de blessures, l'uTilisaTeur doiT lire eT bien
comprendre le manuel de l'uTilisaTeur.
para reducir el riesgo de lesiones, el usuario debe leer y enTender el
manual del operador.
Cat. No.
No de cat.
0730-20
28 VOLT CIRCULAR SAw
SCIE CIRCULAIRE 28 V
SIERRA CIRCULAR DE 28V
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/milwaukee/m28-0730-22/html/bg2.png)
2
![](https://manualstech.ams3.cdn.digitaloceanspaces.com/html/nl/milwaukee/m28-0730-22/html/bg3.png)
3
GENERAL POWER TOOL SAFETY WARNINGS
WARNING READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS. Failure to
follow the warnings and instructions may result in electric shock, îšżre and/or serious injury. Save
all warnings and instructions for future reference. The term “power tool” in the warn-
ings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
BATTERY TOOL USE AND CARE
PERSONAL SAFETY
WORK AREA SAFETY
ELECTRICAL SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmos-
pheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiîšżed plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit inter-
rupter (GFCI) protected supply. Use of an GFCI
reduces the risk of electric shock.
attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewel-
lery or long hair can be caught in moving parts.
• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
• Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
• Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing ac-
cessories, or storing power tools. Such preven-
tive safety measures reduce the risk of starting the
power tool accidentally.
• Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
• Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions, tak-
ing into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
• Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or medi-
cation. A moment of inattention while operating
power tools may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your îšżnger on the switch or energising power tools
that have the switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
• Recharge only with the charger specied by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of îšżre
when used with another battery pack.
• Use power tools only with specically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and îšżre.
Produktspezifikationen
Marke: | Milwaukee |
Kategorie: | Zaagmachine |
Modell: | M28 0730-22 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Milwaukee M28 0730-22 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Zaagmachine Milwaukee
![Milwaukee](/images/pdf_free.png)
6 September 2024
![Milwaukee](/images/pdf_free.png)
1 September 2024
![Milwaukee](/images/pdf_free.png)
1 September 2024
![Milwaukee](/images/pdf_free.png)
1 September 2024
![Milwaukee](/images/pdf_free.png)
19 August 2024
![Milwaukee](/images/pdf_free.png)
15 August 2024
![Milwaukee](/images/pdf_free.png)
4 August 2024
![Milwaukee](/images/pdf_free.png)
4 August 2024
![Milwaukee](/images/pdf_free.png)
3 August 2024
![Milwaukee](/images/pdf_free.png)
3 August 2024
Bedienungsanleitung Zaagmachine
- Zaagmachine Brennenstuhl
- Zaagmachine Cotech
- Zaagmachine Makita
- Zaagmachine Bosch
- Zaagmachine Flex
- Zaagmachine Parkside
- Zaagmachine Vonroc
- Zaagmachine AEG
- Zaagmachine Black And Decker
- Zaagmachine Cocraft
- Zaagmachine FERM
- Zaagmachine Ryobi
- Zaagmachine Skil
- Zaagmachine Topcraft
- Zaagmachine Trotec
- Zaagmachine Maestro
- Zaagmachine Hilti
- Zaagmachine Bort
- Zaagmachine DeWalt
- Zaagmachine Einhell
- Zaagmachine Festool
- Zaagmachine Mafell
- Zaagmachine Worx
- Zaagmachine Tacklife
- Zaagmachine Hikoki
- Zaagmachine Hitachi
- Zaagmachine Hyundai
- Zaagmachine Fuxtec
- Zaagmachine Max
- Zaagmachine Metabo
- Zaagmachine Stanley
- Zaagmachine Atika
- Zaagmachine GĂĽde
- Zaagmachine Power Craft
- Zaagmachine Scheppach
- Zaagmachine Workzone
- Zaagmachine Biltema
- Zaagmachine Meec Tools
- Zaagmachine Dremel
- Zaagmachine Fieldmann
- Zaagmachine Westfalia
- Zaagmachine Remington
- Zaagmachine Husqvarna
- Zaagmachine Stihl
- Zaagmachine Dedra
- Zaagmachine DURO
- Zaagmachine Graphite
- Zaagmachine Pattfield
- Zaagmachine Silverline
- Zaagmachine Holzmann
- Zaagmachine Florabest
- Zaagmachine Stiga
- Zaagmachine Hammer
- Zaagmachine ACG
- Zaagmachine Greenworks
- Zaagmachine Huvema
- Zaagmachine Robust
- Zaagmachine Zipper
- Zaagmachine Baumr-AG
- Zaagmachine Genesis
- Zaagmachine BluCave
- Zaagmachine Morrison
- Zaagmachine Batavia
- Zaagmachine Evolution
- Zaagmachine Matrix
- Zaagmachine Dolmar
- Zaagmachine Bavaria
- Zaagmachine Toolcraft
- Zaagmachine Fein
- Zaagmachine AL-KO
- Zaagmachine IDEAL
- Zaagmachine Cobra
- Zaagmachine Verto
- Zaagmachine Craftsman
- Zaagmachine Powerplus
- Zaagmachine Alpha Tools
- Zaagmachine Elektra Beckum
- Zaagmachine McCulloch
- Zaagmachine Ozito
- Zaagmachine Yard Force
- Zaagmachine Sun Joe
- Zaagmachine Solo
- Zaagmachine Texas
- Zaagmachine Ridgid
- Zaagmachine Porter-Cable
- Zaagmachine VARO
- Zaagmachine Spear & Jackson
- Zaagmachine Ferrex
- Zaagmachine FOM
- Zaagmachine Gamma
- Zaagmachine Gardenline
- Zaagmachine Global
- Zaagmachine Gude Pro
- Zaagmachine HURRICANE
- Zaagmachine Lux Tools
- Zaagmachine Max Bahr
- Zaagmachine Maxx
- Zaagmachine Qualcast
- Zaagmachine Tanaka
- Zaagmachine Toolson
- Zaagmachine Wolfcraft
- Zaagmachine Masport
- Zaagmachine Meister Craft
- Zaagmachine Clarke
- Zaagmachine Sovereign
- Zaagmachine Challenge Xtreme
- Zaagmachine RIKON
- Zaagmachine Jonsered
- Zaagmachine Einhell Bavaria
- Zaagmachine Proviel
- Zaagmachine Tryton
- Zaagmachine MTM
- Zaagmachine MyTool
- Zaagmachine McKenzie
- Zaagmachine Anova
- Zaagmachine Ergotools Pattfield
- Zaagmachine IKRA
- Zaagmachine FIXIT
- Zaagmachine BGU
- Zaagmachine Ultranatura
Neueste Bedienungsanleitung fĂĽr -Kategorien-
![Einhell](/images/pdf_free.png)
7 September 2024
![Einhell](/images/pdf_free.png)
7 September 2024
![Einhell](/images/pdf_free.png)
7 September 2024
![Einhell](/images/pdf_free.png)
7 September 2024
![Einhell](/images/pdf_free.png)
7 September 2024
![Anova](/images/pdf_free.png)
7 September 2024
![Anova](/images/pdf_free.png)
6 September 2024
![Anova](/images/pdf_free.png)
6 September 2024
![Anova](/images/pdf_free.png)
6 September 2024
![Anova](/images/pdf_free.png)
6 September 2024