Milwaukee M18 Fuel 2728-21HD Bedienungsanleitung

Milwaukee Laubbläser M18 Fuel 2728-21HD

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Milwaukee M18 Fuel 2728-21HD (16 Seiten) in der Kategorie Laubbläser. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/16
Cat. No. / No de cat.
2728-20
M18™ BLOWER
SOUFFLANTE M18™
SOPLADOR M18™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
IMPORTANT
SAFETY
INSTRUCTIONS
WARNING
Read all safety warnings,
instructions, illustrations
and speciîšżcations provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, îšżre and/or serious injury.
Save all warnings and instructions for future
reference.
READ ALL INSTRUCTIONS
BEFORE USE
WORK AREA SAFETY
•Do not use in the presence of explosive dust,
liquids or vapors. Power tools have motors
and other parts that can produce sparks during
normal use. Do not use within 30 feet of areas
where explosive materials may be present (such
as gasoline pumps and places where liquids like
paint thinners, cleaners, solvents, etc. are stored).
• Do not use where oxygen or anesthetics are
used.
• Do not allow to be used as a toy. Close attention
is necessary when used by or near children.
Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
•Use extra care when using on stairs. Do not over-
reach. Keep proper footing and balance at all
times. Keep work area clean and well lit. This en-
ables better control of the tool in unexpected situations.
•Avoid dangerous environmental conditions. To
reduce the risk of electric shock, do not expose
to rain. Store tool indoors.
• Inspect the area before using the power tool.
Remove all debris and hard objects such as rocks,
glass, wire, etc. that can ricochet, be thrown, or
otherwise cause injury or damage during operation.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
•Always wear eye protection. Use of this tool can
result in foreign objects being blown into eyes,
which can result in eye damage.
•Wear a face or dust mask when working in dust
situations. Dust particles can harm your lungs.
• Use personal protective equipment. Protective
equipment such as hearing protection, protective
clothing, and non-skid safety shoes used for ap-
propriate conditions will reduce personal injuries.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
• Do not point tool at self or bystanders. Keep
bystanders 50' away during use. Objects may be
thrown or ricochet in all directions.
• Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Use the power tool, accessories, etc. in ac-
cordance with these instructions, taking into
account the working conditions and the work
to be performed. Use of the power tool for opera-
tions different from those intended could result in a
hazardous situation.
• Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your îšżnger on
the switch or energizing power tools that have the
switch on invites accidents.
• Use the correct power tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
• Use only as described in this manual. Use only
manufacturer’s recommended attachments.
• Do not point tool at anything that is burning or
smoking such as cigarettes, matches, or hot ashes.
•To reduce the risk of health hazards from vapors
or dust, do not use tool near tool toxic, carcino-
genic or other hazardous materials such as as-
bestos, arsenic, barium, beryllium, lead, pesticides
or other health endangering materials.
•
WARNING
Some dust created by
power sanding, sawing,
grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples
of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
cially designed to îšżlter out microscopic particles.
• Do not use power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
•Avoid accidental starting. Ensure the switch is
in the off-position before inserting battery pack.
Inserting battery packs in tools that have the switch
on invites accidents.
• Do not put hands or objects into openings. Do
not use with any opening blocked; keep free of dust,
lint, hair, and anything else that may reduce air ow.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
• Maintain power tools and accessories. Check for
misalignment or binding of moving parts, break-
age of parts and any other condition that may
affect the power tool’s operation. If damaged,
have the power tool repaired before use. Many
accidents are caused by poorly maintained power
tools.
3
BATTERY PACK USE AND CARE
• Remove the battery pack from the power tool
before making any adjustments, changing ac-
cessories, storing, or any time the power tool is
not in use. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
•Turn off power tool before removing battery
pack.
• Do not handle battery pack, tool, or charger
(including charger plug and terminals) with wet
hands.
•Before using the battery pack or charger read
the operator’s manuals, and any labels on the
battery pack, charger and tool.
•Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of îšżre when used
with another battery pack.
• Use tool only with specically designated bat-
tery packs. Use of any other battery packs may
create a risk of injury and îšżre.
• When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a îšżre.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns. It may be toxic if swallowed.
• Do not use damaged battery pack or tool. If battery
pack or appliance are not working as they should,
have been dropped, damaged, left outdoors, or
dropped into water, return them to a service center.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to îšżre or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range speciîšżed in the instructions. Charging
improperly or at temperatures outside the speciîšżed
range may damage the battery and increase the risk
of îšżre.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
•Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
READ AND SAVE ALL
INSTRUCTIONS FOR
FUTURE USE
FUNCTIONAL DESCRIPTION
1. Variable speed trigger lock
2. Trigger
3. Handle
4. Air intake vent
5. Tube latch
6. Tube
6
3
2
4
1
5
SPECIFICATIONS
Cat. No. 2728-20 .....................................................
Volts.............................................................. 18 DC
Battery Type .................................................M18™
Charger Type M18™................................................
No Load RPM ...............................................13 350
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Safety Alert Symbol
Read Operator's Manual
Always wear eye protection, hearing
protection, and protective clothing
and footwear.
Do not use in rain or wet locations.
Electric shock could occur.
mini mu m
50' / 15m
Keep bystanders 50' away during use
Do not point tool at self or bystanders.
Objects may be thrown or ricochet in
all directions.
Do not put hands or objects into
openings. Laceration can occur.
Keep hair contained. It can be pulled
into moving parts.
Do not wear loose clothing or jewelry.
It can be pulled into moving parts.
CUS
UL Listing for Canada and U.S.

Produktspezifikationen

Marke: Milwaukee
Kategorie: Laubbläser
Modell: M18 Fuel 2728-21HD

Brauchst du Hilfe?

Wenn Sie Hilfe mit Milwaukee M18 Fuel 2728-21HD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Laubbläser Milwaukee

Milwaukee

Milwaukee M18 Fuel 2728-21HD Bedienungsanleitung

26 Juli 2024
Milwaukee

Milwaukee M18 BBL Bedienungsanleitung

7 Juni 2024
Milwaukee

Milwaukee M18 Fuel 2724-21HD Bedienungsanleitung

21 Oktober 2022

Bedienungsanleitung Laubbläser

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Worx

Worx WG519 Bedienungsanleitung

14 Oktober 2024
Vonroc

Vonroc S3_LB502DC Bedienungsanleitung

12 Oktober 2024
Meec Tools

Meec Tools 004-908 Bedienungsanleitung

12 Oktober 2024
Stihl

Stihl BGA 56 Bedienungsanleitung

4 Oktober 2024
Sun Joe

Sun Joe SBJ597E Bedienungsanleitung

28 September 2024
Ryobi

Ryobi RY40451 Bedienungsanleitung

24 September 2024
Hitachi

Hitachi RB 24EAP Bedienungsanleitung

20 September 2024
Makita

Makita UB141D Bedienungsanleitung

17 September 2024
Worx

Worx WG591.9 Bedienungsanleitung

16 September 2024
Husqvarna

Husqvarna 125BX Bedienungsanleitung

16 September 2024