Milwaukee 48-08-0561 Bedienungsanleitung

Milwaukee Sägemaschine 48-08-0561

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Milwaukee 48-08-0561 (8 Seiten) in der Kategorie Sägemaschine. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

Cat. No. / No de cat.

48-08-0561

FOLDING TABLE SAW STAND

SUPPORT DE SCIE À TABLE PLIANT

BASE PLEGABLE PARA SIERRA FIJA

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

SPECIFIC SAFETY RULES

TABLE SAW STAND

WARNING

Read all safety warnings and all

instructions provided with the ta-

ble saw stand and the table saw to be mounted.

Failure to follow the warnings and instructions may

result in electric shock, re and/or serious injury.

Save all warnings and instructions for future

reference.

• Disconnect the battery pack from the table saw

before making any adjustments or changing

accessories. Accidental starting of the power tool

is a cause of some accidents.

• Properly assemble the table saw stand before

mounting the tool. Proper assembly is important

to prevent risk of collapse.

• Securely fasten the table saw to the table saw

stand before use. Table saw shifting on the table

saw stand can cause loss of control.

• Place the table saw stand on a solid, at and level

surface. If the table saw stand can shift or rock, the

table saw or workpiece cannot be safely controlled.

• Do not overload the table saw stand or use as

ladder or sca󰀨olding. Overloading or standing on

the table saw stand causes the stand to be “top-

heavy” and likely to tip over.

• Use only with MILWAUKEE Table Saws 2736-20,

and mount securely, according to these instruc-

tions. Improperly installed Table Saws can cause

injury or property damage.

• Avoid dangerous environments. Use your tool stand

on at, level, dry, and hard surfaces only.

• Keep work area clean and well lit. Cluttered, dark

work areas invite accidents.

• The table saw stand weight limit is lb (82 180 kg).

If more than 180 lbs is placed on the table saw stand it

may be damaged and may cause personal injury.

• Maintain control. Keep proper footing and balance at

all times.

• Maintain table saw stand carefully. Keep table saw

stand dry, clean and free from oil and grease. Follow

instructions for changing accessories. Periodically

inspect table saw stand for damage and wear.

• Maintain labels. These carry important information. If

unreadable or missing, contact a MILWAUKEE service

facility for a free replacement.

• Keep bystanders away. Children and bystanders

should be kept at a safe distance from the work area

to avoid distracting the operator.

• To reduce the risk of injury, always wear eye pro-

tection.

• Fingers can be pinched between the legs of the

table saw stand. To reduce the risk of injury, keep

your ngers out of the areas where the legs will

fold.

• Always use common sense and be cautious

when using tools. It is not possible to anticipate

every situation that could result in a dangerous out-

come. Do not use this tool if you do not understand

these operating instructions or you feel the work is

beyond your capability; contact Milwaukee Tool or

a trained professional for additional information or

training.

ASSEMBLY

WARNING

Properly assemble the table saw

stand before mounting the tool.

Proper assembly is important to ensure stability.

Legs must match with corresponding number

indicators on the stand.

Assembling the Stand

Indicators

Short

Bolt & Nut

Long Bolt,

Spacer, & Nut

Adjustable

Foot & Nut

1. Remove all packaging and zip ties.

2. Insert the legs into the frame according to the in-

dicator stickers. Mismatched leg/frame assembly

will cause the frame to wobble.

3. Insert a small bolt through the frame/legs assembly

and thread on the nut. Use a 6 mm hex wrench

and an adjustable (or 17 mm open end) wrench

to securely tighten.

4. Insert the legs of narrower frame through the

opening between the cross bar and top of the

wider frame. To complete this step and align the

bolt holes, you will need to tip the narrow frame

side to side to pass the cross bar through the

opening of the wider frame. For assembly as-

sistance, go to the product information page at

www.milwaukeetool.com.

5. Lay the assembly on its side and align the bolt

holes, placing the plastic spacer between the

frame sections, as shown.

6. Insert the long bolt through the wider frame,

spacer, and narrower frame and secure with the

nut. Use a 6 mm hex wrench and an adjustable

(or 17 mm open end) wrench to securely tighten.

7. Screw the nut onto the adjustable foot (the nut

may come factory assembled)

8. Screw in the adjustable foot into the stand until the

stand sits level. Turn the nut back until it contacts

the frame, locking the adjustable foot in place.

Crossbar

Installing the Table Saw

Rear

Brackets

Latch

Tab

1. Hook the back of the saw into the rear brackets.

2. Lower the front of the saw onto the frame.

3. Secure the latch onto the saw's front tab.

WARNING

Properly level the table saw stand

before each use. If the table saw

stand can shift or rock, the table saw or work-

piece cannot be safely controlled.

Leveling

1. Loosen the locking nut.

2. Screw in or out the foot to level the stand.

3. Tighten the locking nut ush with stand.

SERVICE - UNITED STATES

1-800-SAWDUST (1.800.729.3878)

Monday-Friday, 7:00 AM - 6:30 PM CST

or visit www.milwaukeetool.com

Contact Corporate After Sales Service Technical

Support with technical, service/repair, or warranty

questions.

Email: metproductsupport@milwaukeetool.com

B e c o m e a H e a v y D u ty Clu b Me m b e r a t

www.milwaukeetool.com to receive important

notications regarding your tool purchases.

SERVICE - CANADA

Milwaukee Tool (Canada) Ltd

1.800.268.4015

Monday-Friday, 7:00 AM - 4:30 PM CST

or visit www.milwaukeetool.ca

LIMITED WARRANTY

USA & CANADA

Every MILWAUKEE power tool* (see exceptions below) is warranted

to the original purchaser only to be free from defects in material and

workmanship. Subject to certain exceptions, MILWAUKEE will repair

or replace any part on an electric power tool which, after examination,

is determined by MILWAUKEE to be defective in material or workman-

ship for a period of ve (5) years** after the date of purchase unless

otherwise noted. Return of the power tool to a MILWAUKEE factory

Service Center location or MILWAUKEE Authorized Service Station,

freight prepaid and insured, is required. A copy of the proof of purchase

should be included with the return product. This warranty does not

apply to damage that MILWAUKEE determines to be from repairs

made or attempted by anyone other than MILWAUKEE authorized

personnel, misuse, alterations, abuse, normal wear and tear, lack of

maintenance, or accidents.

Normal Wear: Many power tools need periodic parts replacement and

service to achieve best performance. This warranty does not cover

repair when normal use has exhausted the life of a part including,

but not limited to, chucks, brushes, cords, saw shoes, blade clamps,

o-rings, seals, bumpers, driver blades, pistons, strikers, lifters, and

bumper cover washers.

*This warranty does not cover Air Nailers & Staplers; Airless Paint

Sprayer; Cordless Battery Packs; Gasoline Driven Portable Power

Generators; Hand Tools; Hoist – Electric, Lever & Hand Chain; M12™

Heated Gear; Reconditioned Product; and Test & Measurement

Products. There are separate and distinct warranties available for

these products.

**The warranty period for Job Site Radios, M12™ Power Port, M18™

Power Source, Jobsite Fan and Trade Titan™ Industrial Work Carts

is one (1) year from the date of purchase. The warranty period for

the Drain Cleaning Cables is two (2) years from the date of purchase.

The warranty period for the LED in the LED Work Light and the LED

Upgrade Bulb for the Work Light is the lifetime of the product subject

to the limitations above. If during normal use the LED or LED Bulb

fails, the part will be replaced free of charge.

Warranty Registration is not necessary to obtain the applicable war-

ranty on a MILWAUKEE power tool product. The manufacturing date

of the product will be used to determine the warranty period if no proof

of purchase is provided at the time warranty service is requested.

ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT

REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CON-

TRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT.

IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT

PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE

BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL

OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES,

EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSE-

QUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY

PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR

LOSS OF PROFITS. SOME STATES DO NOT ALLOW THE EX-

CLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL

DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT

APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU

OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL.

TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH

DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WAR-

RANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE

EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES

DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WAR-

RANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO

YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,

AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM

STATE TO STATE.

This warranty applies to product sold in the U.S.A. and Canada only.

Please consult the ‘Service Center Search’ in the Parts & Service sec-

tion of MILWAUKEE’s website www.milwaukeetool.com or call 1.800.

SAWDUST (1.800.729.3878) to locate your nearest service facility for

warranty and non-warranty service on a Milwaukee electric power tool.

Produktspezifikationen

Marke:	Milwaukee
Kategorie:	Sägemaschine
Modell:	48-08-0561

Brauchst du Hilfe?

Wenn Sie Hilfe mit Milwaukee 48-08-0561 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Sägemaschine Milwaukee

Milwaukee M12 2420-21 Bedienungsanleitung

6 Oktober 2024

Milwaukee M12 JS-402B Bedienungsanleitung

3 Oktober 2024

Milwaukee HD18 JSB-402C Bedienungsanleitung

17 September 2024

Milwaukee M18 Fuel 2720-22 Bedienungsanleitung

15 September 2024

Milwaukee TILT-LOK 6390-21 Bedienungsanleitung

14 September 2024

Milwaukee M18 FTCHS14 Bedienungsanleitung

12 September 2024

Milwaukee MXF COSCG2 Bedienungsanleitung

6 September 2024

Milwaukee 49-90-2829 Bedienungsanleitung

5 September 2024

Milwaukee MSUV280 Bedienungsanleitung

4 September 2024

Milwaukee M18 C18 HZ-0 Bedienungsanleitung

1 September 2024

Bedienungsanleitung Sägemaschine

Neueste Bedienungsanleitung für -Kategorien-

MSW -TAS287 Bedienungsanleitung

16 Oktober 2024

MSW T-SAW300 Bedienungsanleitung

16 Oktober 2024

Makita 5603 Bedienungsanleitung

15 Oktober 2024

Black And Decker KS650 Bedienungsanleitung

15 Oktober 2024

Royal Catering RCBS-1650 Bedienungsanleitung

15 Oktober 2024

Royal Catering RCBS-1650.1ECO Bedienungsanleitung

15 Oktober 2024

Einhell TC-SM 2131 Dual Bedienungsanleitung

14 Oktober 2024

Einhell TC-AP 650 E Bedienungsanleitung

12 Oktober 2024

Makita DJV181Z Bedienungsanleitung

12 Oktober 2024

Einhell TE-SM 36/210 Li Solo Bedienungsanleitung

11 Oktober 2024