Mikrotik DISC Lite5 ac Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Mikrotik DISC Lite5 ac (6 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 66 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
Disc Lite5 ac
Disc Lite5 ac
Disc Lite5 ac
Disc Lite5 acDisc Lite5 ac
RBDiscG-5acD
DISC Lite5 ac
The DISC is an outdoor wireless system with a built-in directional antenna. It can be used as a CPE or for Point to Point links.
Safety Warnings
Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing
accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
The Installation of the equipment must comply with local and national electrical codes.
This product is intended to be mounted outdoors on a pole. Please read the mounting instructions carefully before beginning installation. Failure to use the
correct hardware and configuration or to follow the correct procedures could result in a hazardous situation for people and damage to the system.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
Read the installation instructions before connecting the system to the power source.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your
own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.
This is a class A device. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate
measures.
Exposure to Radio Frequency Radiation:
Exposure to Radio Frequency Radiation:
Exposure to Radio Frequency Radiation:
Exposure to Radio Frequency Radiation:Exposure to Radio Frequency Radiation:This MikroTik equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an
uncontrolled environment.This MikroTik device should be installed and operated no closer than 20 centimeters from your body, occupational user, or the
general public.
Connecting
Open the Ethernet door to connect an ethernet cable to the ethernet port, connect the other end of the ethernet cable to the included PoE injector.
Plug the PoE injector into your network switch or ISP internet outlet.
Plug the included power supply into the PoE injector to start up the device.
Set LAN computer IP configuration to (DHCP).
automatic
Once connected to the wireless network, open in your web browser to start configuration, since there is no password by https://192.168.88.1
default, you will be logged in automatically . (or, for some models, check user and wireless passwords on the sticker)
We recommend clicking the "Check for updates" button and updating your RouterOS software to the latest version to ensure the best
performance and stability.
Choose your country, to apply country regulation settings, and set up your password on the screen that loads.
Powering
1.
2.
3.
The device only accepts 10-30 V power from Passive PoE injectors (one power supply and PoE injector are included).
Connecting to a POE Adapter:
Connect the Ethernet cable from the device to the POE port of the POE adapter.
Connect an Ethernet cable from your LAN to the LAN port of the POE adapter, please mind arrows for data and power flow.
Connect the power cord to the adapter, and then plug the power cord into a power outlet.
Booting process
The device is configured as a wireless client. Configuration must be done through the Ethernet port. RouterOS includes many configuration options in
addition to what is described in this document. We suggest starting here to get yourself accustomed to the possibilities: .https://mt.lv/help
In case IP connection is not available, the Winbox tool ( ) can be used to connect to the MAC address of the device from the LAN side https://mt.lv/winbox
(all access is blocked from the internet port by default).
For recovery purposes, it is possible to boot the device from the network, see a section .Reset button
Assembly and mounting
The device comes bundled with a metal mounting ring, which can be used on either side of the product (two mounting slots available). The third, central
mount point is compatible with the quickMount Pro (not included).
Extension Slots and Ports
One 10/100 Ethernet port, supporting automatic cross/straight cable correction (Auto MDI/X), so you can use either straight or cross-over cables
for connecting to other network devices.
One Integrated Wireless 5GHz 802.11a/n or ac (depending on model), 2x2 MIMO with a built-in directional antenna, max gain 21 dBi.
Reset button
The reset button has three functions:
Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds).
Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device will now look for a CAPsMAN server (total 10
seconds).
Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the RouterBOARD look for Netinstall servers (total 15
seconds).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device.
Useful for RouterBOOT debugging and recovery.
Accessories
Package includes the following accessories that come with the device:
DC EU/US Switching Power Supply 24 V, 0.38 A, 9 W, Level VI, cable:1.5 m.
POE Injector cable (POE) / Gigabit POE injector (GPOE).
Hose clamp 40/60 p3-w2 A2 9 mm.
Specifications
For more information about this product, specification and pictures please visit our web page: https://mikrotik.com/product/disc_lite5_ac
Operating System Support
The device supports RouterOS software with the version number at or above what is indicated in the RouterOS menu /system resource. We recommend
using RouterOS 6.44.3 or newer on this device. Other operating systems have not been tested.
MikroTik mobile app
Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point.
Federal Communication Commission Interference Statement
Model
Model
Model
ModelModel FCCID
FCCID
FCCID
FCCIDFCCID
RBDiscG-5acD TV7LHG5ACD
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a commercial installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance.
To avoid pollution of the environment, please separate the device from household waste and dispose of it in a safe manner, such as in
designated waste disposal sites. Familiarize yourself with the procedures for the proper transportation of the equipment to the designated
disposal sites in your area.


Produktspezifikationen

Marke: Mikrotik
Kategorie: Nicht kategorisiert
Modell: DISC Lite5 ac
Prozessortaktfrequenz: 716 MHz
Produktfarbe: Weiß
Höhe: 80 mm
Energiequelle: PoE
Betriebstemperatur: -40 - 70 °C
Netzstandard: IEEE 802.11ac
Warentarifnummer (HS): 85177100
Antenne Zunahmeniveau (max): 21 dBi
Montageset: Ja
Frequenzband: 5 GHz
Speicherkapazität: 256 MB
Durchmesser: 265 mm
Eingangsspannung: 10 - 30 V
Verkabelungstechnologie: 10/100/1000Base-T(X)
Eingebauter Prozessor: Ja
Flash-Speicher: 16 MB
Horizontale Lichtstrahlbreite: 12 °
Vertikale Lichtstrahlbreite: 12 °
Antenna Zuwachs (5 GHz): 21 dBi

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mikrotik DISC Lite5 ac benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Mikrotik

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-