MGL Avionics INFO-2 Bedienungsanleitung
MGL Avionics
Meetapparatuur
INFO-2
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr MGL Avionics INFO-2 (24 Seiten) in der Kategorie Meetapparatuur. Dieser Bedienungsanleitung war fĂĽr 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/24
G-force meter
UTC and local time display
Slip indicator
Battery Voltage, *Current and Charge display
OAT display
Flight Timer & Flight log
Stopwatch
Countdown Timer
Alarm
* Requires the MGL Avionics magnetic field or active current shunt (sold separately)
Blaze INFO-2
Information Display
Operating Manual – English 1.00
Blaze INFO-2 Operating Manual Page 2
Introduction
The INFO-2 is a 3 1/8” sunlight readable multifunction color display instrument. The INFO-2 has the following features:
G-force meter
The INFO-2 is capable of measuring g-forces exerted in an aircraft up to +-16g. The INFO-2 also has the facility to record
the maximum positive and negative g-forces encountered (typically during a flight) in permanent memory, with a
password protected reset facility. It also features two independent cycle counters to capture the amount of times a preset
force has been exceeded. The INFO-2 is able to measure g-forces even if the instrument is not mounted exactly on the
vertical axis of the aircraft.
UTC and Local Time display
The INFO-2 is capable of displaying both UTC (as known as Zulu time) and local time to facilitate ordinary ATC time
reporting. Time is maintained by an internal lithium battery which can be replaced by the user.
Slip indicator
The INFO-2 can display a slip indicator. The slip indicator can be disabled in the menu system.
Battery Voltage, *Current and Charge display
The INFO-2 can be used to monitor your aircraft’s battery power supply. The INFO-2 is very useful in determining your
battery’s health, charging status, as well as the current load consumption of your aircraft. The INFO-2 can be used in both
12V and 24V aircraft and can measure voltages up to 30V DC.
The INFO-2 uses the MGL Avionics magnetic field or active current shunt to measure the aircrafts current load. The
INFO-2 contains a programmable low/high voltage alarm to automatically detect bad batteries and alternator failures. The
maximum and minimum voltage reached is also recorded in permanent memory.
OAT display
OAT can be shown in either degrees Celsius or degrees Fahrenheit. The INFO-2 also contains a programmable low/high
OAT alarm. The maximum and minimum OAT reached is also recorded in permanent memory.
Flight Timer & Flight log
The INFO-2 provides a 50 entry flight log that stores the start time and duration of each of the last 50 flights. The flight
timer can either be started using a front push button or from a remote input.
Stopwatch, Countdown Timer & Alarm
Stopwatch and timers can be operated simultaneously to a programmable alarm, making the INFO-2 particularly suitable
for sport flying competitions.
1 Features
•Large 2.6” high resolution 320x240, IPS (fully viewable in all directions), sunlight readable color LCD
display
• G-force range of +-16g
• Records the maximum positive and negative g-forces encountered (typically during a flight) in permanent
memory, with a password protected reset facility
• Two independent cycle counters capture the amount of times a preset force has been exceeded
• Able to measure G-forces even if the instrument is not mounted exactly on the vertical axis of the aircraft
• Capable of displaying both UTC (Zulu time) and local time
• Time is maintained by an internal lithium battery which can be replaced by the user
• Can measure voltages up to 30V (compatible with both 12V and 24V aircraft supplies)
• Contains a programmable low/high voltage alarm to automatically detect alternator failures and bad
batteries
• Uses the MGL Avionics magnetic field or active current shunt to measure the aircrafts current load.
• *Contains a charge status indicator
• OAT can be shown in degrees Celsius or degrees Fahrenheit
• Contains a programmable low/high OAT alarm
Blaze INFO-2 Operating Manual Page 3
• Provides a 50 entry flight log that stores the start time and duration of each of the last 50 flights
• The flight timer can either be started using a front push button or from a remote input
• Stopwatch and timers can operate simultaneously to a programmable alarm
• Standard 3 1/8” aircraft enclosure (can be front or rear mounted)
• The LED backlight can automatically adjust to the ambient light, or it can be manually adjusted in the
menu system
• Rotary control plus 2 independent buttons for easy menu navigation and user input
• An external output activates when an alarm condition has been reached
• Wide input supply voltage range of 8 to 30V DC with built in voltage reversal and over voltage protection
for harsh electrical environments
• 1 year limited warranty
* Requires the MGL Avionics magnetic field or active current shunt (sold separately)
2 Layout
F2 / Down Button:
Menu System: Softkey button
Normal Display: Mode dependent,
See section 3
Rotary Control (Up/Down) & Enter Button:
Press the rotary control during the normal display screens to access the menu system.
Rotate anti/clockwise for up/down menu scrolling. Rotate the rotary control during the
normal display mode to switch between the main display screens.
F1 / Up Button:
Menu System: Softkey button
Normal Display: Mode dependent,
See section 3
3 1/8” enclosure.
Can be front or rear mounted
Ambient light sensor
Sunlight readable color graphic display:
The backlight can automatically adjust
to the ambient light or it can be manually
adjusted in the menu system
Produktspezifikationen
Marke: | MGL Avionics |
Kategorie: | Meetapparatuur |
Modell: | INFO-2 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit MGL Avionics INFO-2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Meetapparatuur MGL Avionics
20 August 2024
19 August 2024
18 August 2024
17 August 2024
17 August 2024
16 August 2024
Bedienungsanleitung Meetapparatuur
- Meetapparatuur Basetech
- Meetapparatuur LogiLink
- Meetapparatuur Panasonic
- Meetapparatuur Voltcraft
- Meetapparatuur Bosch
- Meetapparatuur Flex
- Meetapparatuur Laserliner
- Meetapparatuur Velleman
- Meetapparatuur Alecto
- Meetapparatuur Techno Line
- Meetapparatuur TFA
- Meetapparatuur Cocraft
- Meetapparatuur Einhell
- Meetapparatuur Pyle
- Meetapparatuur Mitsubishi
- Meetapparatuur Topcom
- Meetapparatuur Pioneer
- Meetapparatuur Megasat
- Meetapparatuur Continental Edison
- Meetapparatuur Hazet
- Meetapparatuur Perel
- Meetapparatuur Wago
- Meetapparatuur Lanaform
- Meetapparatuur Amprobe
- Meetapparatuur Metrix
- Meetapparatuur Westfalia
- Meetapparatuur Honeywell
- Meetapparatuur Reely
- Meetapparatuur Holzmann
- Meetapparatuur Midland
- Meetapparatuur Grohe
- Meetapparatuur ABB
- Meetapparatuur Kopp
- Meetapparatuur Hager
- Meetapparatuur Omnitronic
- Meetapparatuur Kyoritsu
- Meetapparatuur GW Instek
- Meetapparatuur Monacor
- Meetapparatuur KERN
- Meetapparatuur BrĂĽder Mannesmann
- Meetapparatuur Aktobis
- Meetapparatuur Testo
- Meetapparatuur Albrecht
- Meetapparatuur Kogan
- Meetapparatuur Peak
- Meetapparatuur IDEAL
- Meetapparatuur TrueLife
- Meetapparatuur Carrier
- Meetapparatuur Testboy
- Meetapparatuur Fantini Cosmi
- Meetapparatuur Multimetrix
- Meetapparatuur IFM
- Meetapparatuur Extech
- Meetapparatuur BENNING
- Meetapparatuur Fluke
- Meetapparatuur Soler & Palau
- Meetapparatuur FLIR
- Meetapparatuur Vemer
- Meetapparatuur Oregon Scientific
- Meetapparatuur Finder
- Meetapparatuur Stabila
- Meetapparatuur Elgato
- Meetapparatuur Hikmicro
- Meetapparatuur Duro Pro
- Meetapparatuur Enda
- Meetapparatuur Entes
- Meetapparatuur Gossen Metrawatt
- Meetapparatuur Joy-it
- Meetapparatuur LaCie
- Meetapparatuur Maximum
- Meetapparatuur Megger
- Meetapparatuur PCE Instruments
- Meetapparatuur PICO
- Meetapparatuur RK Technology
- Meetapparatuur Sanwa
- Meetapparatuur Sonel
- Meetapparatuur Uni-T
- Meetapparatuur Wachendorff
- Meetapparatuur Owon
- Meetapparatuur PeakTech
- Meetapparatuur Siig
- Meetapparatuur Eltako
- Meetapparatuur H-Tronic
- Meetapparatuur Beha-Amprobe
- Meetapparatuur Chauvin Arnoux
- Meetapparatuur Electronics International
- Meetapparatuur Eastron
- Meetapparatuur Emko
- Meetapparatuur Wentronic
- Meetapparatuur Trumeter
- Meetapparatuur Etymotic
- Meetapparatuur ORNO
- Meetapparatuur TDE Instruments
- Meetapparatuur Apollo Ultrasonic
- Meetapparatuur Adwa
- Meetapparatuur Greisinger
- Meetapparatuur Clean Air Optima
- Meetapparatuur Motrona
- Meetapparatuur Atmel
- Meetapparatuur Tru Components
- Meetapparatuur Qubino
- Meetapparatuur Janitza
- Meetapparatuur CEM
- Meetapparatuur Klein Tools
- Meetapparatuur Tempo
- Meetapparatuur CIRCUTOR
- Meetapparatuur Seaward
- Meetapparatuur Dostmann Electronic
- Meetapparatuur ClimeMET
- Meetapparatuur Cliff
- Meetapparatuur Water-i.d.
- Meetapparatuur Tektronix
- Meetapparatuur Hanna
- Meetapparatuur Qualita
- Meetapparatuur Aerospace Logic
- Meetapparatuur GMW
- Meetapparatuur SOEKS
- Meetapparatuur HOZO Design
- Meetapparatuur Corentium
- Meetapparatuur GQ
- Meetapparatuur Murideo
- Meetapparatuur SecuTech
- Meetapparatuur NetPeppers
- Meetapparatuur SensoProtect
- Meetapparatuur ZKETECH
- Meetapparatuur LabNation
- Meetapparatuur MASIMO
- Meetapparatuur Milesight
- Meetapparatuur Ermenrich
- Meetapparatuur Siglent
- Meetapparatuur Noyafa
Neueste Bedienungsanleitung fĂĽr -Kategorien-
18 September 2024
18 September 2024
17 September 2024
16 September 2024
15 September 2024
14 September 2024
14 September 2024
12 September 2024
12 September 2024
12 September 2024