MGL Avionics ALT-5 Bedienungsanleitung

MGL Avionics Messgeräte ALT-5

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für MGL Avionics ALT-5 (13 Seiten) in der Kategorie Messgeräte. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/13
Introduction
The ALT-5 is a 2 1/4” sunlight readable encoding altimeter and a wide range vertical speed indicator.
The altimeter contains an internal high accuracy 24 bit digital altitude sensor which calculates altitude from -1000 ft up to
a maximum of 35000 ft. The ALT-5 outputs various formatted RS232 serial data protocols compatible with serial input
transponders such as that from Garmin, Magellan, Northstar, Trimble, Microair etc. The altimeter can display altitude in
feet or meters and local pressure can be set in millibars or inches of mercury
The VSI indicator can be displayed in either feet/minute (ft/min) or meters/second (m/s). The VSI can be calibrated by the
user once the instrument has been installed in the aircraft.
The ALT-5 also features a user settable altitude bug and an encoder test function. The ALT-5 provides a parallel Gillham
code interface when used in conjunction with the MGL Avionics CNV-ALT.
1 Features
•Large 1.8” high resolution 160x128, sunlight readable, wide viewing angle, 1000 cd/m2 TFT LCD display
• An internal high accuracy 24 bit digital altitude sensor calculates altitude from –1000 ft up to a maximum
of 35000 ft (-304m to 10668m)
• The ALT-5 outputs various formatted RS232 serial data protocols compatible with serial input
transponders such as that from Garmin, Magellan, Northstar, Trimble, Microair etc.
• Provides a parallel Gillham code interface for transponders when used in combination with the MGL
Avionics CNV-ALT
• Built in encoder test function
• The altimeter can display altitude in feet or meters
• Local pressure can be set in millibars or inches of mercury
• Contains a wide range VSI indicator from +/-20 ft/min to as high as +/-10000 ft/min
• VSI units can be in feet/minute (ft/min) or in meters/second (m/s)
• User settable altitude bug
• Standard 2 1/4” aircraft enclosure (can be front or rear mounted)
• Rotary control plus 2 independent buttons for easy menu navigation and user input
• Wide input supply voltage range of 8 to 30V DC with built in voltage reversal and over voltage protection
for harsh electrical environments
• 1 year limited warranty
Vega ALT-5
Altimeter and Vertical Speed Indicator
with a transponder compatible serial
RS232 output
Operating Manual – English 1.00
Vega ALT-5 Operating Manual Page 2
2 ALT-5 Layout
3 Main Displays
The ALT-5 has 2 different display screens. The main display screen can be selected in the menu. “ALT SETUP”
3.1 Altitude "TAPE" Display
F2 / Down Button:
Menu system: Softkey button
Normal display: Altitude
bug setting display
Sunlight readable color
graphic display:
Backlight can be adjusted in the
menu system
Rotary Control (Up/Down) & Enter Button:
Press the rotary control during the normal display screens to access the menu system. Rotate anti/clockwise
for up/down menu scrolling. Rotate the rotary control during the normal display mode to adjust the local
pressure. Local pressure can be set in either mB or in “Hg.
F1 / Up Button:
Menu system: Softkey button
Normal display: Enable/disable
altitude bug
2 1/4” enclosure.
Can be front or rear mounted
VSI scale indication
VS I (Vertical Speed Indication)
VSI unit
Altitude Tape
Altitude Value
Altitude Bug
Local pressure readout (Either in mB or in “HG)
VSI Value
Altitude unit
Vega ALT-5 Operating Manual Page 3
3.2 Altitude "CLASSIC" Display
3.3 Altitude Bug
Press the F2/Down button during the altitude “TAPE” display to access the altitude bug setting screen. Press the F1/UP
key to set the altitude bug to the current altitude or use the rotary control to adjust the altitude bug. Press the F2/Down
key to change the increment / decrement unit to 50 or 500. Press the rotary control to exit and save.
Press the F1/Up button during the normal altitude “TAPE” display to enable or disable the altitude bug. The bug will be
yellow when in the display screen and cyan when either above or below the limits of the display.
VSI Value
VSI unit
Altitude unit
Altitude Value
VSI scale indication
VSI (Vertical Speed Indication)
Local pressure readout (Either in mB or in “HG)

Produktspezifikationen

Marke: MGL Avionics
Kategorie: Messgeräte
Modell: ALT-5

Brauchst du Hilfe?

Wenn Sie Hilfe mit MGL Avionics ALT-5 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Messgeräte MGL Avionics

MGL Avionics

MGL Avionics FF-5 Bedienungsanleitung

21 August 2024
MGL Avionics

MGL Avionics FF-4 Bedienungsanleitung

20 August 2024
MGL Avionics

MGL Avionics INFO-2 Bedienungsanleitung

19 August 2024
MGL Avionics

MGL Avionics Blaze ASI-5 Bedienungsanleitung

19 August 2024
MGL Avionics

MGL Avionics ALT-5 Bedienungsanleitung

18 August 2024
MGL Avionics

MGL Avionics ASV-1 Bedienungsanleitung

17 August 2024
MGL Avionics

MGL Avionics Vega ASI-4 Bedienungsanleitung

17 August 2024
MGL Avionics

MGL Avionics Blaze ASV-2 Bedienungsanleitung

16 August 2024

Bedienungsanleitung Messgeräte

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Stamos

Stamos S-LS-41 Bedienungsanleitung

16 Oktober 2024
Stamos

Stamos S-LS-58 Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments LTS-20 Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-313A Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-320 Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-032-LED Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments FME Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-2500N Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-2550 Bedienungsanleitung

16 Oktober 2024
PCE Instruments

PCE Instruments PCE-2600N Bedienungsanleitung

16 Oktober 2024