Metra AXDSPL-VW1 Bedienungsanleitung

Metra Audio/Video-Konverter AXDSPL-VW1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra AXDSPL-VW1 (13 Seiten) in der Kategorie Audio/Video-Konverter. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/13

AXDSPL-VW1

I N S T A L L A T I O N I N S T R U C T I O N S

Google Play Store Apple App Store

iOS 12.1 or higher

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties • Multimeter

TABLE OF CONTENTS

Installation Options ...............................................2

Installation .............................................................2

Connections ........................................................3-4

AXDSPL-BT Installation...........................................5

AXDSPL-SP Installation...........................................6

Mobile App .........................................................7-15

Speciﬁcations ....................................................... 16

Volkswagen † DSP Interface With Pre-Wired

Harness 2011-2014

• Includes a DSP (Digital Signal Processor)

• 15 Band graphic EQ

• 6 outputs including front, rear, and subwoofer

• Independent equalization for front, rear, and sub

• Selectable low pass, band pass, and high pass ﬁlters

• Selectable crossover slopes; 12db, 24db, 36db, 48db

• Each channel can be delayed independently up to 10ms

• Clipping detection and limiting circuits

• Designed for non-ampliﬁed models

• Easy behind the radio installation with pre-wired harness

• Internal header port for adding interface modules

• Bass knob included for level control of subwoofer amp

• Settings adjusted via Bluetooth® in a smart device application (tablet

or mobile phone), compatible with both Android and Apple devices

• Read, write, and store conﬁgurations for future recall

• Password protect feature available in the mobile app

• Micro-B USB updatable

• AXDSPL-VW1 interface

• AXDSPL-VW1 interface harness

• AXDSPL-VW1 vehicle T-harness • Bass knob

APPLICATIONS

Visit axxessinterfaces.com for current application list

† Excluding models equipped with a Fender sound system

Adding a sub to a factory system:

This feature offers the ability to add a subwoofer to a factory system. (refer to page 3)

Adding a full-range amp & sub to a factory system:

This feature offers the ability to add a full-range amp and sub to a factory system. (refer to page 4)

16-pin header port:

Inside the interface is a 16-pin header port for adding optional modules (sold separately). Page 5

and 6 will show the installation and use of these modules.

• AXDSPL-BT - Bluetooth streaming interface

• AXDSPL-SP - Toslink digital output

Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing

multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps

combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.

1. Remove the factory radio †, then unplug all connectors.

2. Install the AXDSPL-VW1 vehicle T-harness to the vehicle and make all necessary

connections, but leave the amp turn-on wire disconnected.

3. AXDSPL-VW1 vehicle T-harness AXDSPL-VW1 interface Plug the to the .

4. Plug the AXDSPL-VW1 interface harness AXDSPL-VW1 interface to the .

Download and install the AX-DSP-X app Google Play Store Apple App Store from the or

Cycle the ignition on.

7. Open the app then select the Bluetooth Connection tab. Follow the instructions to

pair the mobile device to the interface. Refer to page 6 for more information.

8. Conﬁguration Scroll to the tab then select the vehicle type. Press the ‡ Lock Down

button to save the conﬁguration. Refer to page 7 for more information.

9. Connect the amp turn-on wire.

10. Adjust the settings in the app as desired. Press the ‡ button to save any Lock Down

new conﬁgurations.

† Refer to Metra online for dash disassembly. If Metra makes a dash kit for the vehicle,

disassembly will be within those instructions.

‡ Anytime the interface is locked down the key must be cycled off then back on

INSTALLATION OPTIONS INSTALLATION

REV. 8/3/2020 INSTAXDSPL-VW1

Factory Radio

These outputs can be used for

additional sub amps, or for adding

onto the em at a later datesyst

RCA Jacks

(sold separately)

K deep Connecte

Any remaining wires

tape off and disregard

Black - Ground

Orange - Control

Bass Knob

Factory Radio Harness

Interface

Any remaining wires

tape off and disregard

Vehicle T-Harness

Blue/White - Amp Turn-On Wire

Interface Harness

ADDING A SUB TO A FACTORY SYSTEM

Produktspezifikationen

Marke:	Metra
Kategorie:	Audio/Video-Konverter
Modell:	AXDSPL-VW1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra AXDSPL-VW1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Audio/Video-Konverter Metra

Metra AXDSPL-VW1 Bedienungsanleitung

18 August 2024

Metra MPS-DSPL-BT Bedienungsanleitung

18 August 2024

Metra AXDSPL-HN3 Bedienungsanleitung

17 August 2024

Metra AXDSPX-GL44 Bedienungsanleitung

17 August 2024

Metra AX-DSPH-HN2 Bedienungsanleitung

16 August 2024

Bedienungsanleitung Audio/Video-Konverter

Neueste Bedienungsanleitung für -Kategorien-

Abus TVAC20001 Bedienungsanleitung

11 Oktober 2024

Cambridge DacMagic Bedienungsanleitung

4 Oktober 2024

König KN-HDMICON26 Bedienungsanleitung

2 Oktober 2024

LevelOne GVM-1101 Bedienungsanleitung

30 September 2024

StarTech.com VS123HD Bedienungsanleitung

26 September 2024

StarTech.com VS421HDDP Bedienungsanleitung

26 September 2024

StarTech.com ST228MX Bedienungsanleitung

26 September 2024

StarTech.com HDMI2DVI Bedienungsanleitung

26 September 2024

StarTech.com VGANTSCPRO Bedienungsanleitung

26 September 2024

StarTech.com CPNT2VGAA Bedienungsanleitung

26 September 2024