Metra 99-9103 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 99-9103 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
METRA. The World’s best kits.™© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
REV. 9/11/2015 INST99-9103
Installation instructions for part 99-9103
CAUTION!
Metra recommends disconnecting the negative bat
-
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con-
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
metraonline.com
• DIN radio provision
A) Radio housing
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • XSVI-9004-NAV (A3) • 70-1787 (A4 & S4)
Antenna Adapter: • 40-VW54
• 86-9001 radio removal keys • Panel removal tool
TOOLS REQUIRED
Audi A3 2006-2007(with Concert radio)
A4 & S4 (with Concert radio) 2000-2005
99-9103
A
Dash Disassembly ..................................................2
Kit Assembly
– DIN radio provision ............................................... 3
Table of Contents
99-9103
2
1. Insert Metra’s 86-9001 into the
slots in the factory radio and pull
the radio out. (Figure A)
2. Disconnect the wiring.
Dash Disassembly
(Figure A)
99-9103
Kit Assembly
DIN radio provision
1. Remove the metal DIN sleeve from
the aftermarket radio.
2. Place the Radio Housing into the
radio opening in the dash.
3. Slide the sleeve into the radio
opening through the Radio
Housing, and secure by bending
the metal locking tabs outwards.
Make sure the locking tabs
catch both the edge of the Radio
Housing, and the dash.
4. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
5. Slide the radio back into the sleeve
until it clicks in.
3


Produktspezifikationen

Marke: Metra
Kategorie: Nicht kategorisiert
Modell: 99-9103

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 99-9103 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Metra

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-