Metra 99-8252 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 99-8252 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
REV. 6/21/2016 INST99-8252
INSTALLATION INSTRUCTIONS FOR PART 99-8252
METRA. The World’s best kits.metraonline.com © COPYRIGHT 2016 METRA ELECTRONICS CORPORATION
CAUTION!
All accessories, switches, climate controls panels,
and especially air bag indicator lights must be connected before
cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.
ISO DIN radio provision with pocket
ISO DDIN radio provision
Painted and textured to match the factory appearance
A) Radio housing trim panel B) Brackets • C) Pocket • D) (2) Panel clips • E) (8) #8 x 3/8” Phillips screws
20;-,(;<9,:
20;*64765,5;:
>0905.(5;,55(*655,*;065: (sold separately)
Wiring Harness: • 70-1761 • TYTO-02 (JBL amp)
Antenna Adapter: 40-LX11
Panel removal tool • Phillips screwdriver • 10mm socket wrench
;663:9,8<09,+
Toyota Tundra 2014-up
99-8252
A
Dash Disassembly ................................................. 2
Kit Assembly
ISO DIN radio provision with pocket ...................... 3
ISO DDIN radio provision ...................................... 3
Table of Contents
B C ED
99-8252
2
1. Unsnap and remove the factory
climate controls. (Figure A)
2. Remove (4) 10mm bolts securing
the factory radio and remove it.
Continue to kit assembly
Dash Disassembly
(Figure A)
99-8252
3
Kit Assembly
ISO DIN radio provision with pocket
1. Attach the included panel clips to the
radio housing trim panel. Factory
clips can also be used if desired.
2. Mount the pocket radio to the
brackets with the (4) supplied
#8 x 3/8 Phillips screws. (Figure A)
3. Mount the bracket/pocket assembly
to the with the housing trim panel
remaining (4) supplied #8 x 3/8
screws. (Figure B)
4. Slide the radio into radio brackets
and secure with screws supplied
with the radio. (Figure C)
5. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper
mating adapters from Metra and/or
AXXESS.
6. Mount the new radio assembly into
the dash and reassemble the dash in
reverse order of disassembly.
(Figure C)
(Figure A)
(Figure B)
ISO DDIN radio provision
1. Attach the included panel clips to the
radio housing trim panel. Factory
clips can also be used if desired.
2. Attach the brackets radio to the
housing trim panel using (4) of the
supplied #8 x 3/8” screws.
(Figure A)
3. Slide the radio into the bracket/
radio housing assembly and secure
to the assembly using the screws
supplied with the radio. (Figure B)
4. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS.
5. Mount the new radio assembly into
the dash and reassemble the dash in
reverse order of disassembly.
(Figure A)
(Figure B)


Produktspezifikationen

Marke: Metra
Kategorie: Nicht kategorisiert
Modell: 99-8252

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 99-8252 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Metra

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-