Metra 99-7629S Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 99-7629S (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
METRA. The World’s best kits.metraonline.com © COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
REV. 11/5/2015 INST99-7629S
Installation instructions for part 99-7629S
CAUTION!
Metra recommends disconnecting the negative bat
-
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con-
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
ISO DIN radio provision with pocket
ISO DDIN radio provision
Painted to match factory dash panel
A) Radio trim panel • B) Radio brackets • C) Pocket D) (10) #8 x 3/8 Phillips screws E) (6) Panel clips
F) Rear A/C delete plugs
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-7550
Antenna Adapter:Not required
Panel removal tool • Phillips screwdriver
Torx T-10 driver
TOOLS REQUIRED
Nissan Armada/Titan w/ Factory NAV 2004-2007
99-7629S
A B C D E
F
Dash Disassembly ................................................. 2
Kit Preparation ....................................................... 3
Kit Assembly
ISO DIN radio provision with pocket ...................... 3
ISO DDIN radio provision ...................................... 4
Table of Contents
99-7629S
2
Vehicle:
1. Unclip and remove the climate-
control/radio panel. (Figure A)
2. Remove (4) screws securing the
radio to the sub-dash and then
remove. (Figure B)
Climate-control/radio panel:
3. Unsnap and remove the (3) outer
trim rings from the climate control
knobs. (Figure C)
4. Remove (4) T-10 Torx screws to
separate the factory radio trim
panel. (Figure D)
5. Unclip and remove the hazard light
switch assembly.
6. Remove (2) T-10 Torx screws
securing the passenger air bag
light assembly and then remove.
(Figure D)
Note: The small round sticker also
needs to be removed from the
factory panel and placed onto the
99-7629S radio trim panel.
Continue to kit preparation
Dash Disassembly
CLIP
HAZARD SWITCH
PASSENGER AIR BAG LIGHT
T-10 TORX
SCREW
T-10 TORX
SCREW
A/C CONTROL PANEL
INSIDE VIEW - RADIO TRIM PANEL BACK
1
2
3
4
T-10 T ORX SCREWS
T-10 T ORX SCREWS
1 2
(Figure D)
(Figure A)
(Figure B)
OFF
(Figure C)
99-7629S
Kit Preparation Kit Assembly
(Figure A)
(Figure B)
ISO DIN radio provision with pocket
1. Secure the radio brackets to the
pocket using (4) #8 x 3/8” Phillips
screws supplied. (Figure A)
2. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
3. Slide the radio in the pocket/
bracket assembly, and then secure
to the assembly using the screws
provided with the radio. (Figure B)
4. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
5. Reassemble the dash in reverse
order of disassembly, using the
99-7629S radio trim panel.
3
To the 99-7629S :radio trim panel
1. Attach the factory climate controls using
(4) #8 X 3/8” Phillips screws supplied.
(Figure A)
2. Snap the outer trim rings onto the climate
control knobs. (Figure B)
3. Attach the passenger air bag light
assembly using (2) #8 X 3/8” Phillips
screws supplied. (Figure C)
Note:
Apply the small round airbag sticker
previously removed to the air bag button.
4.
Snap in the hazard light switch. (Figure D)
5. Attach (6) panel clips using the factory
radio panel as a reference for clip
positioning.
6. For models without rear A/C, snap in the
(2) rear A/C delete plugs.
Continued to kit assembly
A/C
12
3
4
0
1
2
3
4
0
MAX
A/
C
R
R
R
(Figure B)
A/C
OFF
1
23
4
0
1
2
3
4
0
MA
X A/
C
R
R
R
(Figure D)
A/C
OF F
1
2
3
4
0
1
2
3
4
0
MAX
A/
C
R
R
R
(Figure C)
A/C
12
3
4
0
1
2
3
4
0
MAX
A/
C
R
R
R
(Figure A)


Produktspezifikationen

Marke: Metra
Kategorie: Nicht kategorisiert
Modell: 99-7629S

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 99-7629S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Metra

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-