Metra 99-7381 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Metra 99-7381 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 1/8/18 INST99-7381
I N S TA L L A T I O N I N S T R U C T I O N S
99-7381
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws • E) (4) #6 x 3/8” Phillips screws
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
–ISO DIN radio provision with pocket ..................3
–ISO DDIN radio provision .....................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-1004
Antenna Adapter: Not required
Steering Wheel Control Interface: ASWC-1
A B C D E
Hyundai Santa Fe (with factory NAV) 2008-2009
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Remove (1) Phillips screw from the right
side of the panel below the steering
column then unclip and let right side of
panel hang. (Figure A)
2. Unclip and remove the cover above the
clock on top of panel surrounding the
radio. (Figure B)
3. Unclip and remove the panel extending
across the dash below the a/c control
and above the glove box including the
ash tray. (Figure C)
4. Remove (2) Phillips screws then unclip
and remove the panel surrounding the
radio including the A/C vents. (Figure D)
5. Remove (4) Phillips screws securing the
radio. Unplug and remove radio.
Note:
Illustrations shown are not actual
representation of the vehicle.
Continue to Kit Assembly
(Figure C) (Figure D)
(Figure A) (Figure B)
REV. 1/8/2018 INST99-7381 3
KIT ASSEMBLY
ISO DIN radio provision with pocket
1. Attach the
radio brackets
to the
radio
trim panel
using the (4) #6 x 3/8”
Phillips screws provided. (Figure A)
2. Attach the
pocket
to the
radio brackets
using the (4) #8 x 3/8” Phillips screws
provided. (Figure B)
3. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
4. Slide the radio into the bracket/pocket
assembly and then secure it using the
screws supplied with the radio. (Figure C)
5. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
6. Reassemble the dash in reverse order
of disassembly.
ISO DDIN radio provision
1. Attach the
radio brackets
to the
radio
trim panel
using the (4) #6 x 3/8”
Phillips screws provided. (Figure A)
2. Slide the radio into the bracket assembly
and then secure it using the screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
4. Reassemble the dash in reverse order
of disassembly.
(Figure A)
(Figure B)
(Figure C)
(Figure B)
(Figure A)


Produktspezifikationen

Marke: Metra
Kategorie: Nicht kategorisiert
Modell: 99-7381

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 99-7381 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Metra

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-