Metra 99-6545B Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 99-6545B (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 1/17/18 INST99-6545B
I N S TA L L A T I O N I N S T R U C T I O N S
99-6545B
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted matte black
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws • E) (7) Panel clips
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wire harness: • XSVI-6523-NAV
Antenna adapter: • 40-EU10
Steering wheel control interface: ASWC-1
A B C D E
Jeep Compass 2017.5-up*
*Visit MetraOnline.com for up-to-date vehicle specic applications.
1.800.221.0932
|
MetraOnline.com
2
(Figure A)
DASH DISASSEMBLY
1. Unclip and remove the a/c vent panel
surrounding the radio.
2. Remove (4) 9/32” screws securing the
radio, then unplug and remove the radio.
Continue to Kit Preparation
Please visit Metraonline.com for
Dash Disassembly illustrations.
1. Attach the
(7)
panel clips
to the
radio
trim panel
.
(Figure A)
Continue to Kit Assembly
KIT PREPARATION
REV. 1/17/2018 INST99-6545B 3
(Figure A) (Figure B)
KIT ASSEMBLY
ISO DIN radio provision with pocket
1. Attach the
pocket
to the
radio brackets
using the (4) #8 x 3/8” Phillips screws
provided. (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Slide the radio into the bracket/pocket
assembly, and then secure it using the
screws supplied with the radio.
(Figure B)
4. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or Axxess.
5. Test the radio for proper operation.
6. Secure the radio assembly to the dash
using the factory screws.
7. Snap the
radio trim panel
over the radio
assembly to complete the installation.


Produktspezifikationen

Marke: Metra
Kategorie: Nicht kategorisiert
Modell: 99-6545B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 99-6545B benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Metra

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-