Metra 99-6525B Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Metra 99-6525B (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
The World’s best kits.® MetraOnline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 9/12/17 INST99-6525
I N S TA L L A T I O N I N S T R U C T I O N S
99-6525
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Integrated buttons and included interface for climate functions
• Painted matte black (99-6525B) or high gloss black (99-6525HG)
KIT COMPONENTS
• A) Radio trim panel with climate controls • B) Radio brackets • C) Lower support bracket • D) Pocket • E) (2) Metal panel clips
• F) (2) Plastic panel clips • G) (2) #8 x 3/8” Phillips pan-head screws • H) (2) #8 x 1/2” Phillips countersunk flat-head screws
• Climate extension cable (not shown) • Axxess interface and wiring harness (not shown) TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• T-30 Torx driver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
– ISO DIN radio provision with pocket .................3
– ISO DDIN radio provision ....................................4
Axxess interface installation ............................. 5-8
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Included
Antenna Adapter: 40-EU10 (sold separately)
Chrysler 300 2011-2014
A B C D E
G H
F
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unclip and remove the top half of the
shift knob. (Figure A)
2. Remove (1) T-30 Torx screw securing the
knob and then remove. (Figure B)
3. Unclip and remove the panel
surrounding the shift knob. (Figure C)
4. Unclip and remove the climate control/
radio control panel.
Note:
The harness removed from
this panel will connect to the climate
extension cable.
(Figure D)
5. Remove (2) Phillips screws securing the
pocket below the climate control panel,
and then unclip and remove the pocket.
(Figure E)
6. Remove the (4) Phillips screws securing
the radio chassis, and then unplug and
remove it from the dash cavity.
Note:
The white round cable connected
to the radio chassis will connect into
the Axxess interface to drive the factory
display screen.
Continue to Kit Assembly
(Figure D)(Figure A)
(Figure C)
(Figure E)(Figure B)
REV. 9/12/2017 INST99-6525 3
KIT ASSEMBLY
(Figure A)
(Figure C)
(Figure B)
ISO DIN radio provision with pocket
1. Attach the provided clips to the
radio
trim panel
(metal clips at the top; plastic
clips at the bottom). (Figure A)
2. Attach the
lower support bracket
to the
radio trim panel with climate controls
.
(Figure A)
3. Attach the
radio brackets
to the
pocket
using the provided (2) #8 x 3/8” Phillips
pan-head screws towards the front of
the pocket, and (2) #8 x 1/2” Phillips
flat-head screws towards the back.
Note:
If the screws are not attached this
way, the assembly will not slide into the
dash.
(Figure B)
Use countersunk screws
for the rear mounts on
the pocket
Plastic clip
Metal clips 4. Remove the metal “DIN” sleeve and trim
ring from the aftermarket radio.
5.
Slide the radio into the pocket/bracket
assembly, and then secure using the
screws supplied with the radio. (Figure C)
Continue to Axxess Interface Installation
Plastic clip


Produktspezifikationen

Marke: Metra
Kategorie: Nicht kategorisiert
Modell: 99-6525B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 99-6525B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Metra

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-