Metra 95-8272B Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Metra 95-8272B (13 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/13
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 3/28/24 INST95-8272B
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
I N S TA L L AT I O N I N S T R U C T I O N S
95-8272B
KIT FEATURES
• ISO DDIN radio provision
• Painted scratch resistant matte black
• Single ISO DIN radio provision with 88-00-9004 pocket
sold separately
KIT COMPONENTS
• A) Front housing • B) Rear housing • C) Radio brackets • D) #8 x 3/8” Phillips screws (4) • E) #4 x 3/8” Phillips screws (8)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket wrench
TABLE OF CONTENTS
Dash Disassembly.............................................. 2-3
Kit Preparation 4 .......................................................
Kit Assembly ..........................................................5
WIRING & ANTENNA CONNECTIONS
(sold separately)
Visit metraonline.com for audio/video and
steering wheel control interface options.
Wire harness: 70-1761
Antenna adapter: 40-NI12
A B C D E
Subaru /Toyota BRZ GR86 2022-2024
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
386.257.1187
|
MetraOnline.com
2
(Figure B) (Figure D)
(Figure A) (Figure C)
DASH DISASSEMBLY
1. Unclip and remove the panel from the
end of the passenger side of the dash
with the door open. (Figure A)
2. Unclip and remove the trim panel above
the glove box and below the right side
air vent. (Figure B)
3. Unclip and remove the trim panel
above the trim panel removed in step 2.
(Figure C)
4. Remove (1) Phillips screw from the right
side of the drivers knee bolster panel
the unclip panel and let hang. (Figure D)
REV. 3/28/2024 INST95-8272B 3
DASH DISASSEMBLY
(CONT.)
(Figure F)
(Figure E) (Figure G)
5. Unclip and remove the A/C vents.
(Figure E)
6. Remove (4) 10 MM bolts securing the
radio then unclip and remove the radio
from the dash. (Figure F)
7. Remove (4) Phillips screws securing the
back plate to the factory radio and keep
for kit assembly. (Figure G)
Continue to Kit Preparation


Produktspezifikationen

Marke: Metra
Kategorie: Nicht kategorisiert
Modell: 95-8272B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 95-8272B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Metra

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-