Metra 95-7861 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 95-7861 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 4/15/19 INST95-7861
I N S TA L L AT I O N I N S T R U C T I O N S
95-7861
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
• ISO DDIN radio provision
KIT COMPONENTS
• A) “LX” trim panel • B) “EX” trim panel • C) “LX” Radio brackets • D) “EX” Radio brackets
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench
TABLE OF CONTENTS
Dash Disassembly
– . Pilot 2003-2005 .................................................2
– . Pilot 2006-2008 (without factory NAV) ..........2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-1721
Antenna Adapter: 03-05 Not required,
06-08 40-HD10
A B C D
Honda Pilot 2003-2005
Honda Pilot (without factory NAV) 2006-2008
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specic applications
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY
(Figure A) (Figure B)
(Figure B) (Figure C)
(Figure C) (Figure D)(Figure A)
Pilot 2003-2005
1. Using a panel removal tool, remove the
blank plate from upper right side of
radio trim panel. (Figure A)
2. Unsnap radio trim panel. Unplug
switches and remove panel. (Figure B)
3. Remove (4) 10mm bolts securing radio,
unplug and remove radio. (Figure C)
Continue to Kit Assembly
Pilot 2006-2008 (without factory NAV)
1. Remove (2) screws from the top of the
instrument panel trim, and then unclip
and remove the instrument panel trim.
(Figure A)
2. Unclip and remove the left center trim
panel. (Figure B)
3. Unclip the radio trim panel, and then
plug and remove the panel. (Figure C)
4. Remove the (4) screws securing the
radio. Unplug and remove the radio.
(Figure D)
Continue to Kit Assembly
REV. 4/15/2019 INST95-7861 3
KIT ASSEMBLY
(Figure B)(Figure A)
Note: Select the proper radio housing for your
vehicle. EX models use the (EX) Double DIN
Trim Plate and (EX) brackets. LX models use
the (LX) Double DIN Trim Plate and
(LX) brackets
1. Clip the radio brackets radio onto the
trim panel. (Figure A)
2. Slide the radio into the bracket/radio
trim panel assembly, and then secure
using the screws supplied with the radio.
(Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Test the radio for proper
operation.
4. Reassemble the dash in reverse order
of disassembly.


Produktspezifikationen

Marke: Metra
Kategorie: Nicht kategorisiert
Modell: 95-7861

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 95-7861 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Metra

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-