Metra 95-7636B Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 95-7636B (5 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 3/12/19 INST95-7636B
I N S TA L L AT I O N I N S T R U C T I O N S
95-7636B
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
• ISO DDIN radio provision
• Painted matte black
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
TABLE OF CONTENTS
Dash Disassembly ...............................................2-3
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-7552
Antenna Adapter: 40-NI12
Nissan Kicks 2018-up
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specic applications
A B
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unclip the driver’s side panel to the
right of the steering column. The panel
only needs unclipped enough to remove
the dash panel in the following steps.
(Figure A)
2. Open the passenger door, then unclip
and remove the panel on the side of the
dash. Remove (1) Phillips screw exposed.
(Figure B)
3. Open the glove box, then unclip and
remove the glove box. (Figure C)
4. Remove (9) Phillips screws in the glove
box cavity, then remove the glove box
housing. (Figure D)
Continued on the next page
(Figure A) (Figure C)
(Figure B) (Figure D)
REV. 2/14/2019 INST95-7636B 3
1. Secure the radio brackets to the radio
using the screws supplied with the
radio. (Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
3. Secure the radio assembly to the dash
using the factory screws.
4. Clip the radio trim panel to the dash.
5.
Reassemble the dash in reverse order of
disassembly to complete the installation.
KIT ASSEMBLYDASH DISASSEMBLY (CONT.)
(Figure A)
(Figure E)
(Figure F)
(Figure G)
5. Remove (1) Phillips screw securing the
passenger side a/c vent, then remove
the vent. (Figure E)
6. Remove (1) Phillips screw securing the
dash panel above the glovebox, then
unclip and remove the panel. (Figure F)
7. Remove (4) Phillips screw securing the
radio. Slide the radio out then unclip and
remove the radio. (Figure G)
Continue to Kit Assembly
unit


Produktspezifikationen

Marke: Metra
Kategorie: Nicht kategorisiert
Modell: 95-7636B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 95-7636B benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Metra

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-