Metra 95-7393B Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 95-7393B (5 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 11/19/18 INST95-7393B
I N S TA L L AT I O N I N S T R U C T I O N S
95-7393B
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets
A B
Hyundai Accent 2018 up*
KIT FEATURES
• ISO DDIN radio provision
• Painted matte black
*Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specic applications
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring harness: Please visit metraonline.com
for wiring harness options
Antenna adapter: 40-KI11
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY KIT PREPARATION
1. Unclip and remove the a/c vent trim
panel surrounding the radio. (Figure A)
2. Remove (4) Phillips screws securing the
radio. Slide the radio out, then unplug
and remove the radio. (Figure B)
Continue to Kit Preparation
(Figure B) (Figure B)
(Figure A) (Figure A)
From the factory a/c vent trim panel:
1. Unclip and remove the a/c vents.
2. Remove just (4) panel clips. (Figure A)
To the 95-7393B radio trim panel:
1. Clip in the factory a/c vents. (Figure B)
2. Attach the factory (4) panel clips.
(Figure B)
Continue to Kit Assembly
REV. 11/19/2018 INST95-7393B 3
KIT ASSEMBLY
(Figure A)
1. Secure the
radio brackets
to the radio
using the screws supplied with the radio.
(Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
3. Secure the radio assembly to the dash
using the factory screws.
4. Reassemble the dash in reverse order of
disassembly using the 95-7393B
radio
trim panel
to complete the installation.


Produktspezifikationen

Marke: Metra
Kategorie: Nicht kategorisiert
Modell: 95-7393B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 95-7393B benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Metra

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-