Metra 95-6544B Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 95-6544B (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
Metra. The World’s Best Kits.MetraOnline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 10/5/17 INST95-6544B
I N S TA L L A T I O N I N S T R U C T I O N S
95-6544B
KIT FEATURES
• ISO DDIN radio provision
• Painted scratch resistant matte black
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) (4) #8 x 3/8” Phillips screws TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• T-25 Torx driver • Cutting tool
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation ....................................................... 3
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: Please visit metraonline.com for
additional adapters and accessories.
Antenna Adapter: 40-EU55
A B C
Fiat 500 2016-up*
*Visit MetraOnline.com for up-to-date vehicle specic applications.
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unsnap and remove the climate control
cover panel. (Figure A)
2. Remove (2) T-25 Torx screws and unclip
and remove the painted dash panel.
(Figures B,C)
(Figure A) (Figure D)
(Figure B) (Figure E)
(Figure C) (Figure F)
3. Remove (4) T-25 Torx from the radio trim
panel including vents and remove the
panel. (Figures D, E))
4. Remove (4) T-25 Torx to remove the
radio (Figure F)
Continue to Kit Preparation
REV. 10/5/2017 INST95-6544B 3
(Figure B)
(Figure A)
ISO-DDIN radio provision
1. Attach the
radio brackets
to the
radio
trim panel
using (4) #8 x 3/8” Phillips
screws supplied. (Figure A)
2. Slide the radio into the completed
assembly, and then secure it to the
assembly using screws supplied
with the radio (Figure B).
3. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra
and/or AXXESS. Test the radio for
proper operation.
4. Reassemble the dash in reverse order
of disassembly.
KIT PREPARATION KIT ASSEMBLY
1. Cut and remove the shaded area from
the sub-dash to allow clearance for the
aftermarket radio. (Figure A)
Continue to Kit Assembly
(Figure A)
Remove
shaded area


Produktspezifikationen

Marke: Metra
Kategorie: Nicht kategorisiert
Modell: 95-6544B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 95-6544B benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Metra

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-