Metra 95-6533B Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 95-6533B (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
METRA. The World’s best kits.metraonline.com © COPYRIGHT 2016 METRA ELECTRONICS CORPORATION
REV. 3/29/2016 INST95-6533B
Installation instructions for part 95-6533B
CAUTION!
All accessories, switches, climate controls panels,
and especially air bag indicator lights must be connected before
cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.
ISO DDIN radio provision
Painted matte black
A) Radio trim panel • B) Cutting template • C) Radio trim panel retainers • D) Radio brackets • E (4) #8 x 3/8” Phillips screws
20;-,(;<9,:
20;*64765,5;:
>0905.(5;,55(*655,*;065: (sold separately)
Wiring Harness:CHTO-01 • XSVI-6502-NAV
Antenna Adapter: • 40-CR10
Panel removal tool Phillips screwdriver
Cutting tool • File 7mm socket wrench
;663:9,8<09,+
Chrysler PT Cruiser 2006-2010
Dodge Durango 2004-2007
Jeep Grand Cherokee 2005-2007
95-6533B
AC D EB
Dash Disassembly ................................................. 2
Kit Assembly .......................................................... 3
Table of Contents
95-6533B
2
Dash Disassembly
(Figure A)
Jeep Grand Cherokee
1. Unsnap and remove the panel from
around the radio including the vent on
each side. (Figure A)
2. Remove (4) 7mm screws securing the
radio, then unplug and remove the radio.
Continue to kit assembly
Chrysler PT Cruiser
1. Remove (2) screws from inside the air
vents on the center dash panel. (Figure A)
2. Unsnap the center dash panel (do not
remove until the climate controls are
removed). (Figure A)
3. Remove (4) Phillips screws securing the
climate control panel to the backside of
the center dash panel.
4. Remove (4) 7mm screws securing the
radio, then unplug and remove the radio.
Continue to kit assembly
(Figure A)
Dodge Durango
1. Remove (2) 7mm screws from the inside
of the pocket facing upward. (Figure A)
2. Unclip and remove the entire trim panel
surrounding the radio and climate
controls. (Figure B)
3. Remove (4) 7mm screws securing the
radio, then unplug and remove the radio.
Continue to kit assembly
(Figure B)
(Figure A)
95-6533B
3
Kit Assembly
(Figure A)
(Figure B)
(Figure C)
ISO DDIN radio provision
1. The top of the radio opening in
each application will need cut or
filed to make room for the new
DDIN radio. Temporarily attach the
provided to the cutting template
back of the dash panel using the
locating pins and/or snaps to align
it correctly. Mark the factory panel
for cutting, remove the template,
and cut and file accordingly.
(Figure A)
2. Snap the radio trim panel over the
front of the factory radio panel (the
snaps will be at the top of the radio
opening). (Figure B)
3. Secure the radio trim panel
retainers radio trim panel to the
using the #8 x 3/8” screws
included with the kit.
4. Attach the radio brackets to the
radio using the screws supplied
with the radio. (Figure C)
5. Locate the factory wiring harness
and antenna plug in the dash and
make all necessary connections
to the radio. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
6. Reassemble the dash in reverse
order of disassembly.
Remove shaded area
Cutting template
Jeep Grand Cherokee shown here


Produktspezifikationen

Marke: Metra
Kategorie: Nicht kategorisiert
Modell: 95-6533B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 95-6533B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Metra

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-