Metra 95-3031B Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 95-3031B (4 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 1/21/20 INST95-3031B
I N S TA L L AT I O N I N S T R U C T I O N S
95-3031B
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
ISO DDIN radio provision
Painted scratch resistant matte black to match the factory finish
KIT COMPONENTS
• A) Radio bezel • B) Radio brackets
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 9/32” socket wrench
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
Wiring Harness: See metraonline for harness
interface solutions
Antenna Adapter: 40-CR10
(sold separately)
Chevrolet Captiva Sport (w nav) 2014-2015
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
A B
1.800.221.0932
|
MetraOnline.com
2
1. Unclip and remove the trim panel on the
top of the dash. (Figure A)
2. Remove (2) 9/32” screws securing
the radio trim panel, then unclip and
remove. (Figure B)
3. Unclip the entire lower console panel
and set aside. (Figure C)
4. Remove (4) 9/32” screws securing the
radio. Slide the radio out, then unplug
and remove.
Continue to Kit Assembly
(Figure B)(Figure A) (Figure C)
DASH DISASSEMBLY
REV. 1/21/2020 INST95-3031B 3
(Figure A) (Figure B)
KIT ASSEMBLY
1. Slide the radio brackets radio into the
bezel. (Figure A)
2. Slide the radio between the radio
brackets, then secure using screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
4. Slide the radio into the dash, then
secure using the factory screws.
5. Reassemble the dash in reverse
order of disassembly to complete the
installation.

Produktspezifikationen

Marke: Metra
Kategorie: niet gecategoriseerd
Modell: 95-3031B

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 95-3031B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung niet gecategoriseerd Metra

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-