Mercury 2WDP001 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Mercury 2WDP001 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
www.avsl.com 001UK User Manual 350.
2.4GHz Wireless Door Phone
Order ref: 350.001 UK
User Manual
This wireless door phone system allows you to talk to your visitors before opening the door. No wires are
required between the external and internal units, making this system very easy to insta , and a range of ll
up to 150m makes this useful for security and helpful for the elderly or less mobile.
Features:
• Easy to install no wiring required ;
• Battery operated IP44 rated external unit with low power consumption
• Battery back-up feature on internal u t ni
• Wireless range up to 150m (clear sight)
• Adjustable ringer volume
In the box:
• IP44 rated external call unit
• Internal handset & cradle
• Internal handset PSU
• Fixing kit
• User guide
Installation:
External Call Unit
1. Fasten the rain shade on the wall 1.4~1.7m above the ground.
2. Remove the screw from the bottom of the ternal unit and remove the bottom plate. ex
www.av .comsl UK User Manual 350.001
3. Remove the silver cover and install 4 AA batteries (not supplied) paying attention to the polarix ty
indicators within the battery compartm ent.
4. Remove name card cover and complete the card as required ie. name, room number, etc. the
5. Attach the unit to the rain shade.
6. Replace the cover.
7. Replace the bottom plate.
www.avsl.com 001UK User Manual 350.
Internal Handset
Ensure that there is a power outlet within reach the handset and its power supply. of
1. Remove the cradle from rear of handset and attach to the wall. the the
2. Open the battery cover, install 4 x AA batteries (not supplied) and replace the cover.
3. Insert the power supply jack into the socket on the re of the handset. ar
4. Hook the handset onto the cradle.
5. Plug the power supply into a power outlet and switch it on. The handset will beep.
The system is now ready f use. or
Operation:
In standby mode, the handset LED will blink every 3 seconds.
When the call button is pressed on the external unit, the handset will chime twice and the LED will change
from blinking to steady.
The external unit will also sound intermittently for approximately one minute or until the handset picked is
up to receive the call.
Lift the handset to speak to the caller.
At the end of the call replace the handset ensuring that it is secure in its cradle. Both units will beep.
If left unanswered, both units will beep after one minute and the system will return to standby mode.
The handset LED will blink rapidly for 10 minutes to indicate that the call button has been pressed after
which time it will return to one blink every 3 seconds.


Produktspezifikationen

Marke: Mercury
Kategorie: Nicht kategorisiert
Modell: 2WDP001

Brauchst du Hilfe?

Wenn Sie Hilfe mit Mercury 2WDP001 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Mercury

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-