Meliconi universal 4 Bedienungsanleitung

Meliconi Fernbedienung universal 4

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Meliconi universal 4 (6 Seiten) in der Kategorie Fernbedienung. Dieser Bedienungsanleitung war fĂĽr 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/6
Thank you for choosing Meliconi.
This universal remote control is used for all the main functions of 4
TV - VCR - SAT - DVD remote controls of the makes listed at the back of the pack.
Keep your Instructions Booklet and Code Booklet for future reference.
TV VCR
Fastext Func.
–Record
Red Rewind
Green Stop
USING THE BUTTONS AND FUNCTIONS
DVD selection key
for a DVD unit or another
unit (Decoder, Pay-TV,
Video projector, Monitor, etc.).
This button lights up whenever
you use a DVD command.
ON/OFF button for
TV - VCR - SAT and DVD.
TV selection button for
using the TV. This button
lights up whenever you
use a TV command.
Teletext buttons:
to access Teletext
to close Teletext and
return to normal viewing
Teletext page hold function
additional Teletext
function.
Confirm button.
To select the next (P+) or
previous (P-) channel or
program. These buttons
can also be used to move
up and down in the MENU.
Mute button.
TV VCR
Fastext Func.
White/Violet
Additional Func.
Blue Fast forward
Yellow Pause
–Play
VCR selection button for
using the VCR.
This button lights up
whenever you use a VCR
command.
SAT selection button for
using the satellite receiver.
This button lights up
whenever you use a
receiver command.
Used to access additional
commands and to program
the remote control.
User customisation
buttons for memorising
and accessing additional
commands.
Number keys.
To access your MENU.
Move within the MENU
using the +/- and P +/-
keys or SHIFT
with +/- P +/- depending
on the model of your original
remote control.
Control the volume
using +/ -. These buttons
can also be used to move to
the right and left in the MENU.
To select an external terminal.
The functions described above are only operative
if your appliance also has them.
GB Use
SET-UP
Read these instructions
carefully before programming
your remote control!
MAKE SEARCH PROGRAMMING MODE
A
1.Turn ON the appliance:
– if a VCR, insert a cassette
– if SAT, select a program
– if DVD, insert a DVD.
2.In the code book enclosed, look for the
make of your appliance and make a
note of the code indicated at the side
(e.g. Philips 001) or the code for the
make indicated by the arrow.
3.Press and release the TV - VCR - SAT -
DVD selection button for the appliance
you want to use:
– the TV button is used to search only
for the TVs of the make selected
– the VCR button is used to search only
for the VCRs of the make selected
– the SAT button is used to search only
for the SATs of the make selected
– the DVD button is used to search only
for the DVDs of the make selected.
4.Hold down the SHIFT and ON/OFF
buttons together until the TV - VCR -
SAT - DVD selection buttons
start to flash indicating that the
remote control is programming.
5.Release the buttons. Within 15
seconds, enter the make code
previously identified (e.g. 001).
The TV- VCR - SAT -DVD selection
button flashes more quickly to indicate
that the remote control is ready for the
search.
6.Point the remote control at the
appliance. Press and release one of
the most frequently used keys several
times STOPPING when the appliance
responds correctly to the command.
7.When the appliance responds
correctly, press SHIFT to confirm.
Three flashes indicate that the
operation has been completed
correctly.
Identify and make a note of the code
for the appliance which you have
searched for following the code
noting procedure (see “NOTING THE
PROGRAMMED CODE” section).
Warning: program one appliance at a time.
SHIFT
SHIFT
FITTING THE BATTERIES
Before programming and using the remote control, fit the batteries.
The remote control requires 2 new AAA/LR03 alkaline batteries.
Insert the batteries as shown.
• The batteries must be changed once a year.
• If the TV - VCR - SAT - DVD/ selection buttons start
to flash during use, this indicates that the batteries
are low and should be changed.
• When you remove the batteries, fit the new ones
within 5 minutes or you may have to reprogram your
remote control.
•Make a note of the codes for the TV - VCR - SAT -
DVD equipment on the adhesive label inside the
battery cover. This note will be handy if you have to
reprogram your control.
TV
DVD
0
0
1
SAT
VCR
NOTE: THE SELECTION BUTTON
STOPS FLASHING.
The remote control leaves the
programming mode and the
TV - VCR - SAT - DVD selection
button stops flashing:
•
if no buttons are pressed for 15 seconds
•
if an invalid make code is entered
•
if the code search list is completed. In
this case, go back to point 3 or switch to
programming mode C
•
if you press the TV - VCR - SAT - DVD -
F1 - F2 - F3 - F4 buttons by mistake.
To program the Universal 4 remote
control, follow the indications
in section A , Bor C.
1.
Turn ON the appliance:
–if a VCR, insert a cassette
–if SAT, select a program
–if DVD, insert a DVD.
2.
Press and release the TV - VCR - SAT -
DVD selection button for the
appliance you want to use:
– the TV button is used to search only
for the TVs of the make selected
– the VCR button is used to search only
for the VCRs of the make selected
– the SAT button is used to search only
for the SATs of the make selected
– the DVD button is used to search only
for the DVDs of the make selected.
3.
Hold down the SHIFT and ON/OFF
buttons together until the TV - VCR -
SAT - DVD selection buttons start to
flash indicating that the remote control
is programming.
4.
Release the buttons. Within 15
seconds, enter the code 000.
The TV- VCR - SAT -DVD selection
button flashes more quickly to indicate
that the remote control is ready for the
search.
5.
Point the remote control at the
appliance. Press and release one of the
most frequently used keys several
times STOPPING when the appliance
responds correctly to the command.
Identify and make a note of the code
for the appliance which you have
searched for following the code
noting procedure (see “NOTING THE
PROGRAMMED CODE” section).
1.
Turn ON the appliance:
–
if a VCR, insert a cassette
–
if SAT, select a program
–
if DVD, insert a DVD .
2.
In the code book enclosed, look
for the make of the TV-VCR-SAT-DVD
appliance you want to control and
make a note of
the first code in the list BENEATH
the make previously identified
(e.g. Philips TV 103 - VCR 345, etc.).
3.
Press and release the TV - VCR - SAT
- DVD selection button for the
appliance you want to use.
You cannot set a VCR code using the
TV button.
4.
Hold down the SHIFT and ON/OFF
buttons together until the TV - VCR -
SAT - DVD selection buttons
start to flash indicating that the
remote control is programming.
5.
Release the buttons, Within 15
seconds, enter the code previously
identified (e.g. TV 103). Three flashes
indicate that the code has been saved
correctly. If not, try the code entry
procedure again from point 3.
Note down the TV - VCR - SAT - DVD codes
used to program the remote control on the
adhesive label supplied;
stick the label to the inside of the
battery cover, for rapid consultation.
NOTE: THE SELECTION BUTTON STOPS
FLASHING.
The remote control leaves the
programming mode and the TV - VCR -
SAT - DVD selection button stops flashing
•if no buttons are pressed for 15 seconds
•if an invalid code is entered
•
if you press the TV - VCR - SAT - DVD
- F1 - F2 - F3 - F4 buttons by mistake.
DIRECT CODE ENTRY
B
Warning: program one appliance at a time.
SHIFT
1
0
3
SHIFT
0
0
0
GLOBAL SEARCH REMOTE CONTROL PROGRAMMING
C
This operation may take up to about 20 minutes.
Warning: program one appliance at a time.
SHIFT
Additional check
Point the remote control at the appliance.
Check that the appliance responds
correctly to the commands sent. If there
is no response or the appliance only
responds partially or incorrectly, it is
probable that you have used the wrong
code. In this case, try the procedure
again from point 3. This time,
however, use the NEXT CODE in the list
(e.g. 111 for TV - 348 for VCR, etc.).
NOTE : THE SELECTION BUTTON STOPS
FLASHING.
The remote control leaves the
programming mode and the TV - VCR -
SAT - DVD selection button stops flashing:
•if no buttons are pressed for 15 seconds
•if the code search list is completed.
•
if you press the TV - VCR - SAT - DVD-
F1 - F2 - F3 - F4 buttons by mistake.
6.
When the appliance responds
correctly, press SHIFT to confirm.
Three flashes indicate that the
operation has been completed
correctly.
Additional check
Check that some of the other functions
used on your original remote control are
working correctly. If the commands
function incorrectly or erratically, you
have probably entered a code for a
similar but different remote control.
In this case, repeat the search procedure
from point 2.
TV
DVD
SAT
VCR
TV
DVD
SAT
VCR

Produktspezifikationen

Marke: Meliconi
Kategorie: Fernbedienung
Modell: universal 4

Brauchst du Hilfe?

Wenn Sie Hilfe mit Meliconi universal 4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Fernbedienung Meliconi

Meliconi

Meliconi universal 4 Bedienungsanleitung

23 September 2024
Meliconi

Meliconi gumbody light facile Bedienungsanleitung

23 September 2024
Meliconi

Meliconi Pratico 2 Bedienungsanleitung

18 September 2024
Meliconi

Meliconi Personal 2 plus Bedienungsanleitung

29 August 2024
Meliconi

Meliconi Speedy 2.1 Bedienungsanleitung

21 August 2024
Meliconi

Meliconi GumBody Light Bedienungsanleitung

21 August 2024
Meliconi

Meliconi Gumbody Personal 7 plus Bedienungsanleitung

20 August 2024
Meliconi

Meliconi Gumbody Personal 2 Bedienungsanleitung

20 August 2024
Meliconi

Meliconi Control TV+ Bedienungsanleitung

20 August 2024
Meliconi

Meliconi Gumbody Personal 6 plus Bedienungsanleitung

20 August 2024

Bedienungsanleitung Fernbedienung

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Neewer

Neewer RT112 Bedienungsanleitung

8 Oktober 2024
Neewer

Neewer RT113 Bedienungsanleitung

8 Oktober 2024
Logitech

Logitech Harmony 600 Bedienungsanleitung

5 Oktober 2024
Furman

Furman RS-2 Bedienungsanleitung

5 Oktober 2024
Hannspree

Hannspree YES-001016 Bedienungsanleitung

3 Oktober 2024
Canon

Canon RS-80N3 Bedienungsanleitung

3 Oktober 2024
Alpine

Alpine RUE-M300 Bedienungsanleitung

2 Oktober 2024
Energy Sistem

Energy Sistem 4100 Bedienungsanleitung

23 September 2024
Humax

Humax RS505 Bedienungsanleitung

23 September 2024
Unitron

Unitron Remote Control Bedienungsanleitung

22 September 2024