Meliconi Pratico 2.1 Bedienungsanleitung
Meliconi
Fernbedienung
Pratico 2.1
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂźr Meliconi Pratico 2.1 (6 Seiten) in der Kategorie Fernbedienung. Dieser Bedienungsanleitung war fĂźr 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/6
Pratico 2.1
Thank you for choosing a Meliconi remote control.
The Pratico 2.1 remote control is designed to command and a DECODER (satellite or digital terrestriala TV ).
IMPORTANT! When the remote control is set to control only device (example: TV), all the buttons will control that one
device; whilst when it is set to control 2 devices (TV + DECODER), e buttons will control the TV, only th V+ V-
whilst the other buttons will control the DECODER. (see chapter COMBINED KEYPAD)
Its ergonomic shape and soft rubber body make it easy to grip and protect it from shocks and drops.
By LEARN function, you can capture and store infrared signals from other remotes and match at will to one or more buttons.
It is also designed to be connected to the PC / TABLET / SMARTPHONE via MELICONI audiocable (included in the
package) in order to download the latest information to its activation.
The MELICONI remote control reproduces infrared signals corresponding to the original; the functions that operate in radio
frequency (e.g. voice commands and pointers) are not supported.
The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.
The remote control requires 2 new 1.5V alkaline batteries, not included in the AAA/LR03
package. Insert with the correct polarity as shown in îgure.
DO NOT use batteries. rechargeable
BATTERIES TEST: Press and hold the 5 button and check that the LED remains on
continuously until the button is released. If the light is oî or blinks, the inserted batteries are low,
therefore they need replacement.
WARNING:
As the remote control is capable of controlling 2 devices, during setup you must select the operation mode then deîne which ;
device you want to control. (TV / STB)
To select the operation mode, press the button quickly and repeatedly until the LED corresponding to
the device you want to operate is switched on. ( led / led) TV = red STB = green
Before using the remote control, for each device you wish to control, it is to set a it matched. essential speciîc code,
Identify the speciîc code and set it into the remote control using one of the following ways:
MANUAL
SEARCH
SMARTPHONE
TABLET - WEB
ACTIVATION OF REMOTE CONTROL
SELECTION OF OPERATING MODE
Do not leave exhausted batteries inserted, as liquid may leak and damage the remote control
INSERTING THE BATTERIES
SAFETY WARNINGS
The remote control and batteries should not be exposed to excessive heat such as sunlight, îre
or the like.
The product . Keep out of reach of children or domestic animals. is not a toy
Keep this booklet for future reference
Use the -code on the side or connect to the page and follow the instructions. qr www.cme.it
Once you have found the speciîc code for your device, set it in the remote control as described in the
ENTERING THE CODE DIRECTLY chapter.
ATTENTION : searching for the suitable code could last up to 5 minutes.
⢠Stand in front of the device to be controlled and make sure it is ON (not in stand-by). If necessary, switch
it on using the original remote control (if this is still working) or the buttons present on the device itself. (on
TVs they can be on the side or the top)
⢠On the MELICONI remote control and then press and hold the butt until select the operating mode on
the LED of the remote control lights up; lease. re
⢠Pointing the remote control towards the device, PRESS AND HOLD butt and wait the ON/OFF on
(even up to 5 minutes) for the device to switch oî.
⢠, w the device turn oî IMMEDIATELY RELEASE the button. PAY ATTENTION hen ,
⢠Three înal îashes indicate that the operation has been completed successfully.
(only to be performed if you know the to be set) speciîc code
⢠On the MELICONI remote control and then press and hold the button until select the operating mode
the LED lights up; release.
⢠Immediately enter the previously identiîed speciîc code.
⢠Three înal îashes indicate that the operation has been completed successfully.
If necessary it is possible to reset the remote control and bring it back to the initial conditions. completely
WARNING : All user settings will be lost. Operate as follows:
⢠On the MELICONI remote control press and hold the button until the LED lights up; release.
⢠Enter the code . 0100
⢠Three înal îashes indicate that the operation has been completed successfully.
RESET THE REMOTE CONTROL
If the remote control does NOT carry out the three înal îashes, the setting is NOT successful; repeat the procedure.
If still unsuccessful, it means that the code is not included in the remote control, contact the ASSISTANCE.
ENTERING THE CODE DIRECTLY
VERIFY
Check that the MELICONI remote control operates your device the main functions if it does not, the in ; REPEAT
procedure.
NOTE: When the list of codes to be searched is over, the remote control exits the search and the LED remains oî.
If no results are obtained, try using the procedure described in the SMARTPHONE - TABLET - WEB chapter or contact
the ASSISTANCE.
MANUAL SEARCH
SMARTPHONE - TABLET - WEB
watch
the video
watch
the video
The Pratico 2.1 remote control is equipped with Learn technology that can acquire and memorise signals from other infrared
remote controls. This feature is particularly useful in several cases.
ď To add or change a function connected to a button on the MELICONI remote control.
Having activated the remote control and checked it is working correctly, you may need to add or replace a function on one
of the MELICONI remote control buttons with another function you consider to be handier or more frequently used.
ď Assign some functions to some buttons to control other devices (example: volume +/- SOUNDBAR).
ď To acquire the keypad of an original remote control when a suitable activation code cannot be found.
If no code on the MELICONI remote control is able to command the required appliance properly, you can capture and
assign to the various buttons the desired functions of the original remote control.
The Pratico 2.1 remote control can learn up to a maximum of signals coming from various original remote controls and 31
connect at will to the desired buttons (even if they have a diîerent use to the one selected).
Signals can also be learnt and set on all the buttons on the MELICONI remote control, except e button. Obviously the th
preset functions are lost, but they can be restored by setting again the activation code.
The Learn operation can be repeated numerous times, and the signals captured are kept in the memory even if the batteries
are removed or go îat.
â POSITIONING THE REMOTE CONTROLS CORRECTLY.
⢠Check that the batteries in both remote controls (the original and the MELICONI remote) are fully
charged; if semi-charged batteries are used the signal acquisition procedure may prove diîicult
or fail completely.
⢠Position the original remote control in front of the MELICONI remote control so the areas which
emit the infrared signals are opposite each other at a distance of approximately 2 cm.
⢠On the MELICONI remote control , wait a few seconds and then press select the operating mode
for a moment the button.
⢠Within 30 seconds, press and hold down one of the buttons on the original remote control; the
LED on the MELICONI remote control should start îashing; if it doesn't, move the remote
controls closer together.
⢠Gradually move the original remote control away, making sure the two remotes stay aligned,
until the point at which the LED stops îashing; then move the remote control to half the previous
distance and keep both remotes in this position until the process has terminated.
â CAPTURING SIGNALS.
⢠On the MELICONI remote control press and hold the button until the LED lights up; release.
⢠Press the button again brieîy and immediately press for a moment the button to which to combine the capture signal.
⢠Press the button on the original remote to be captured, hold it down until the LED goes out and then release it.
IMPORTANT If after releasing the button the LED comes back on, press the same button again until the LED goes out :
once more.
⢠When the signal has been captured correctly the LED will produce three înal îashes.
To capture other signals to connect to other buttons, repeat the procedure described above.
Reached the number of records available, the dedicated memory becomes full, preventing further use.
To free memory use one of the following procedures in relation to the data that you want to delete:
⢠DELETE FUNCTION BY SINGLE BUTTON
⢠ENTERING THE CODE DIRECTLY
⢠RESET THE REMOTE CONTROL
LEARN FUNCTION
watch
the video
Produktspezifikationen
Marke: | Meliconi |
Kategorie: | Fernbedienung |
Modell: | Pratico 2.1 |
Produktfarbe: | Black, White |
Akku-/Batterietyp: | AAA |
Menge pro Packung: | 1 StĂźck(e) |
Betriebsanleitung: | Ja |
Verpackungsart: | Box |
Gehäusematerial: | Gummi |
Anzahl unterstĂźtzter Akkus/Batterien: | 2 |
Schnittstelle: | IR Wireless |
Nachhaltigkeitszertifikate: | CE |
Markenkompatibilität: | Universal |
Maximale Reichweite: | - m |
Wiederaufladbar: | Nein |
Anzahl der unterstßtzten Geräte: | 2 |
Beleuchtete Tasten: | Nein |
Gewährleistungsfrist: | 2 Jahr(e) |
Fernbedienung Nutzung: | TV, TV set-top box |
Eingangssignal: | Drucktasten |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Meliconi Pratico 2.1 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Fernbedienung Meliconi
29 Februar 2024
14 Januar 2024
6 Mai 2023
Bedienungsanleitung Fernbedienung
- Fernbedienung Samsung
- Fernbedienung Genius
- Fernbedienung Hama
- Fernbedienung Nedis
- Fernbedienung Philips
- Fernbedienung SilverCrest
- Fernbedienung Sony
- Fernbedienung Tevion
- Fernbedienung Trust
- Fernbedienung Panasonic
- Fernbedienung Tchibo
- Fernbedienung REV
- Fernbedienung LG
- Fernbedienung AEG
- Fernbedienung Gaggenau
- Fernbedienung Velleman
- Fernbedienung KĂśnig
- Fernbedienung Hema
- Fernbedienung Kenwood
- Fernbedienung Mitsubishi
- Fernbedienung Bose
- Fernbedienung Pioneer
- Fernbedienung Heitech
- Fernbedienung JVC
- Fernbedienung One For All
- Fernbedienung Onkyo
- Fernbedienung Technics
- Fernbedienung TERRIS
- Fernbedienung Vivanco
- Fernbedienung Abus
- Fernbedienung Loewe
- Fernbedienung Metz
- Fernbedienung Steinel
- Fernbedienung Tascam
- Fernbedienung Garmin
- Fernbedienung Marmitek
- Fernbedienung Nikon
- Fernbedienung Wacom
- Fernbedienung DJI
- Fernbedienung Kathrein
- Fernbedienung NAD
- Fernbedienung CME
- Fernbedienung Ruwido
- Fernbedienung Vogel's
- Fernbedienung MB Quart
- Fernbedienung Marantz
- Fernbedienung Arcam
- Fernbedienung Monacor
- Fernbedienung Rockford Fosgate
- Fernbedienung Chamberlain
- Fernbedienung Ranex
- Fernbedienung Revox
- Fernbedienung Energy Sistem
- Fernbedienung Audiovox
- Fernbedienung Insignia
- Fernbedienung Busch-Jaeger
- Fernbedienung DataVideo
- Fernbedienung RCF
- Fernbedienung Delta Dore
- Fernbedienung Projecta
- Fernbedienung Sonos
- Fernbedienung Intertechno
- Fernbedienung Pro-Ject
- Fernbedienung Vaddio
- Fernbedienung RCA
- Fernbedienung Kicker
- Fernbedienung AV:link
- Fernbedienung JL Audio
- Fernbedienung Hähnel
- Fernbedienung Viper
- Fernbedienung EQ3
- Fernbedienung Somfy
- Fernbedienung Furman
- Fernbedienung Jolly
- Fernbedienung KPN
- Fernbedienung Spektrum
- Fernbedienung Steren
- Fernbedienung Amino
- Fernbedienung Universal Remote Control
- Fernbedienung Aston
- Fernbedienung Chief
- Fernbedienung AudioControl
- Fernbedienung Simplify
- Fernbedienung Vello
- Fernbedienung ProMaster
- Fernbedienung Chauvet
- Fernbedienung Arctic Cooling
- Fernbedienung Roswell
- Fernbedienung Neets
- Fernbedienung Thumbs Up
- Fernbedienung PowerBass
- Fernbedienung Bazooka
- Fernbedienung Swiss Sense
- Fernbedienung GBS Elettronica
- Fernbedienung C2G
Neueste Bedienungsanleitung fĂźr -Kategorien-
18 April 2024
16 April 2024
13 April 2024
8 April 2024
7 April 2024
5 April 2024
2 April 2024
1 April 2024
28 März 2024
27 März 2024