Meliconi gumbody universal 5 smart Bedienungsanleitung
Meliconi
Afstandsbediening
gumbody universal 5 smart
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Meliconi gumbody universal 5 smart (7 Seiten) in der Kategorie Afstandsbediening. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/7
8
Keep this booklet for future reference.
Thank you for choosing a Meliconi remote control.
The Universal 5 web remote control is ideal for replacing up to 5 remote controls for TV - SAT (satellite decoder)
- TER (Digital Terrestrial decoder) - DVD (Dvd player and Blu Ray) – PVR (Personal Video Recorder, Media
Center and VCR). Moreover, thanks to its AUDIO UPDATE function, the device can also be connected to a PC
via the cable supplied in order to download the information required to confi gure it. The Universal 5 web remote
control also has a LEARN function so it can learn any original remote control signals not yet inserted in the
databank, as well as allowing secondary functions to be acquired and saved on the F1 - F2 - F3 - F4 function
keys or on any other button on the keypad. The remote control has a non-volatile memory, meaning that it does
not lose its settings even if there are no batteries in it. Its ergonomic shape and soft rubber body make it easy to
grip and protect the remote control if it is knocked or dropped.
IMPORTANT: The remote control must not be exposed to excessive heat sources.
USE OF THE BUTTONS AND FUNCTIONS
The functions of the buttons described below are available only if they are on your original device.
Volume control +/–
TELETEXT buttons
ON/OFF switches the device OFF and
in some cases ON
Numeric keypad
Confi rm selection
MUTE turns sound OFF and ON
For selecting an external
input source
For selecting the next programme P+
or the previous programme P–
For moving around within the MENU
Buttons for selecting the device to be
controlled.
Fastext functions or for selecting sub-
menus using colours
DVD/PVR RECORD PAUSE
STOP PLAY buttons
DVD and PVR forward/back functions
Specifi c buttons for decoder
Displays the list of programmes
Selects analogue/digital
Selects digital TV and radio
Button for activating the LEARN function.
The button lights up when commands are
being captured or transmitted
User customised buttons that additional
commands can be saved to and accessed
directly from
I
EN
9
INSERTING THE BATTERIES
Before using the remote control, insert the batteries and programme it.
The remote control requires 2 new 1.5V alkaline AAA/LR03 batteries.
Insert them as illustrated.
Try pressing a number button and check that the red light remains lit
continuously until you release the button. If the light fl ashes, the batteries
inserted are not charged and are about to go fl at, therefore you must
substitute them.
Do not leave fl at batteries inserted, as liquid may leak and damage the remote control
The Universal 5 web remote control is a universal remote, so its memory contains data relating to numerous
devices of various brands available on the market.
Each original device has a specifi c code which must be used to set up the remote control.
Therefore, to use your Universal 5 web you must enter the specifi c code for each device you wish to control.
So use one of the following methods to identify the correct code and set it in your remote control:
A) - INTERNET (recommended)
B) - CELL PHONE (SMS)
C) - MANUAL SEARCH
SETTING CODES
If you have an Internet connection available, follow the on-line guide on the www.meliconi.com/guide website
to identify the specifi c codes for the devices you wish to command. Then set the codes manually in your
MELICONI remote control as described in the ENTERING THE CODE DIRECTLY procedure.
SETTING CODES USING INTERNET
Today, Meliconi gives customers who don’t have internet the chance to receive the codes for programming their
remote control directly on their cell phone.
Simply send an SMS to this number 0039 345 7518893 as follows: 5A, Type, Brand, Model
- Type = indicate the device to be controlled using one of the following abbreviations: TV - SAT - DVD - VCR - TER
(Digital Terrestrial decoder) - AUX (other audio video device).
- Brand, Model = to indicate the brand and the model of the device to be controlled.
Example: 5A, TV, PHILIPS, 32PFL3614 (if you don’t know the model, don’t write anything after the brand).
Once you have received the SMS with the list of codes, set the fi rst code in the remote control as described in
the ENTERING THE CODE DIRECTLY section.
Stand in front of the device with the MELICONI remote control. Turn the device on and then press the OFF button
on the remote (or the PLAY button if the device is a VCR/DVD).
If the device does NOT switch off (or if the VCR/DVD does not start playing), try setting the consecutive code
in the SMS list in the remote control.
When the device reacts check whether the other buttons are operating correctly too.
If they do, the remote control is ready to use.
If they don’t, you are probably using an incorrect code destined for a very similar device; at this point
ignore the SMS list and consult the SETTING CODES USING A MANUAL CODE section to fi nd a more suitable
code.
SETTING CODES USING A CELL PHONE
NOTE: If you don’t receive an SMS on your cell phone or if the message says ERROR / NO CODE, it
means the system has not been able to process the data you have sent; Do not try sending another
SMS use the MANUAL SEARCH instead.
10
SETTING CODES USING A MANUAL SEARCH
(only to be performed if the specifi c code could not be found)
CHECK
Check that the other buttons correspond to the functions of the original remote control; if not, it is likely
that the code found is incorrect, but is used for a very similar device. In that case, repeat the procedure
from point 2.
If the manual search for the code is successful, obtain the code in use by following the DISPLAY CODE IN
USE procedure and make a note of it inside the battery cover.
NOTE: During the search the indicator stops fl ashing and the remote control exits the programming mode
in the following cases:
• if for 12 seconds the button indicated is not pressed or if another button is pressed
• if the list of codes to fi nd is terminated. If this happens, go to the www.meliconi.com website
1. Switch on the device to be programmed:
- if it is a TV, SAT or TER select a programme
- if it is a DVD insert a DVD.
- if it is a VCR insert a cassette.
2. Press and hold down for 6 seconds the device selection
button corresponding to the device you wish to enter
the code for. Note: Use the PVR button if the device is a
VCR.
3. Release the button. The indicator light will fl ash. Point
the remote control at the device and press the ON/OFF
key (or PLAY if it is a VCR/DVD). If the device does NOT
switch off (or if the VCR/DVD does not start playing)
press the same button again slowly (it may be necssary
to press the button several times).
4. When the device responds correctly, press OK. Three
long fl ashes indicate that the operation has been carried
out correctly.
6 SEC.
or or or or
or
ENTERING THE CODE DIRECTLY
(only to be performed if you know the specifi c code to be set)
1. Press and hold down for 6 seconds the device selection
button corresponding to the device you wish to enter
the code for. Note: Use the PVR button if the device is a
VCR.
2. Release the button. The indicator light fl ashes.
Immediately enter the specifi c code previously found.
(e.g.. 1306).
3. Three long fl ashes indicate a correct setting.
If they do not appear, repeat the procedure. If this still does not work it means the code indicated
is not in the remote control, so it must be loaded using the INTERNET as described in the following
section.
6 SEC.
or or or or
Produktspezifikationen
Marke: | Meliconi |
Kategorie: | Afstandsbediening |
Modell: | gumbody universal 5 smart |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Meliconi gumbody universal 5 smart benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Afstandsbediening Meliconi
18 September 2024
21 August 2024
20 August 2024
20 August 2024
20 August 2024
17 August 2024
7 August 2024
31 Juli 2024
14 Juli 2024
Bedienungsanleitung Afstandsbediening
- Afstandsbediening Hama
- Afstandsbediening Kensington
- Afstandsbediening LogiLink
- Afstandsbediening Logitech
- Afstandsbediening Medion
- Afstandsbediening Nedis
- Afstandsbediening Philips
- Afstandsbediening SilverCrest
- Afstandsbediening Sony
- Afstandsbediening Sweex
- Afstandsbediening T'nB
- Afstandsbediening Targus
- Afstandsbediening Trust
- Afstandsbediening Zalman
- Afstandsbediening Panasonic
- Afstandsbediening Clas Ohlson
- Afstandsbediening Cotech
- Afstandsbediening AEG
- Afstandsbediening Miele
- Afstandsbediening Canon
- Afstandsbediening Velleman
- Afstandsbediening Neumann
- Afstandsbediening CSL
- Afstandsbediening Devolo
- Afstandsbediening Schwaiger
- Afstandsbediening König
- Afstandsbediening Thomson
- Afstandsbediening Kenwood
- Afstandsbediening Bang And Olufsen
- Afstandsbediening Bose
- Afstandsbediening Pioneer
- Afstandsbediening Geemarc
- Afstandsbediening Heitech
- Afstandsbediening JVC
- Afstandsbediening Motorola
- Afstandsbediening One For All
- Afstandsbediening Technics
- Afstandsbediening Vivanco
- Afstandsbediening Abus
- Afstandsbediening Ferguson
- Afstandsbediening Strong
- Afstandsbediening Tascam
- Afstandsbediening Nexa
- Afstandsbediening Lifetec
- Afstandsbediening Lindy
- Afstandsbediening Waeco
- Afstandsbediening Tripp Lite
- Afstandsbediening Ansmann
- Afstandsbediening Marmitek
- Afstandsbediening Naim
- Afstandsbediening Scosche
- Afstandsbediening DJI
- Afstandsbediening Reely
- Afstandsbediening Edision
- Afstandsbediening Metronic
- Afstandsbediening Skymaster
- Afstandsbediening Alpine
- Afstandsbediening NAD
- Afstandsbediening Adj
- Afstandsbediening CGV
- Afstandsbediening Ruwido
- Afstandsbediening Vogel's
- Afstandsbediening Zapman
- Afstandsbediening SilverStone
- Afstandsbediening Vision
- Afstandsbediening Xavax
- Afstandsbediening Hager
- Afstandsbediening Marantz
- Afstandsbediening Ecler
- Afstandsbediening Monacor
- Afstandsbediening Milwaukee
- Afstandsbediening Chamberlain
- Afstandsbediening Packard Bell
- Afstandsbediening JUNG
- Afstandsbediening Aplic
- Afstandsbediening Innr
- Afstandsbediening Ranex
- Afstandsbediening Ei Electronics
- Afstandsbediening Omega
- Afstandsbediening Optex
- Afstandsbediening Revox
- Afstandsbediening Clarion
- Afstandsbediening HQ
- Afstandsbediening Amazon
- Afstandsbediening Reflecta
- Afstandsbediening DataVideo
- Afstandsbediening Cisco
- Afstandsbediening Danfoss
- Afstandsbediening Delta Dore
- Afstandsbediening Intertechno
- Afstandsbediening Engel Axil
- Afstandsbediening BENNING
- Afstandsbediening Aeon Labs
- Afstandsbediening Vaddio
- Afstandsbediening Hikvision
- Afstandsbediening Jensen
- Afstandsbediening JL Audio
- Afstandsbediening Hähnel
- Afstandsbediening PDP
- Afstandsbediening Viper
- Afstandsbediening Homematic IP
- Afstandsbediening EQ3
- Afstandsbediening Nanlite
- Afstandsbediening Emtec
- Afstandsbediening Fusion
- Afstandsbediening Glashart Media
- Afstandsbediening Jasco
- Afstandsbediening Jolly
- Afstandsbediening KlikaanKlikuit
- Afstandsbediening KPN
- Afstandsbediening Nemef
- Afstandsbediening OEM
- Afstandsbediening Online
- Afstandsbediening Provision ISR
- Afstandsbediening Q-Sonic
- Afstandsbediening Revo
- Afstandsbediening Schaudt
- Afstandsbediening Steren
- Afstandsbediening Sunwave
- Afstandsbediening Tevion (Medion)
- Afstandsbediening Tihao
- Afstandsbediening AMX
- Afstandsbediening Uni-T
- Afstandsbediening Universal Electronics
- Afstandsbediening Universal Remote Control
- Afstandsbediening Verizon
- Afstandsbediening Vizio
- Afstandsbediening Voxx
- Afstandsbediening Walkera
- Afstandsbediening Ziggo
- Afstandsbediening Vimar
- Afstandsbediening Siig
- Afstandsbediening Antec
- Afstandsbediening AudioControl
- Afstandsbediening RGBlink
- Afstandsbediening Fortin
- Afstandsbediening Simplify
- Afstandsbediening Profoto
- Afstandsbediening Metra
- Afstandsbediening Mosconi
- Afstandsbediening Vello
- Afstandsbediening Magnus
- Afstandsbediening H-Tronic
- Afstandsbediening Bang Olufsen
- Afstandsbediening SVS
- Afstandsbediening Axis
- Afstandsbediening Wet Sounds
- Afstandsbediening Libec
- Afstandsbediening Malmbergs
- Afstandsbediening Wentronic
- Afstandsbediening Neets
- Afstandsbediening Crestron
- Afstandsbediening Antelope Audio
- Afstandsbediening ORNO
- Afstandsbediening Extron
- Afstandsbediening Valueline
- Afstandsbediening Artsound
- Afstandsbediening Bigben Interactive
- Afstandsbediening DSC
- Afstandsbediening Memphis Audio
- Afstandsbediening Beoplay
- Afstandsbediening Swiss Sense
- Afstandsbediening GBS Elettronica
- Afstandsbediening Control4
- Afstandsbediening Xit
- Afstandsbediening ETiger
- Afstandsbediening TELE System
- Afstandsbediening Multibrackets
- Afstandsbediening MIOPS
- Afstandsbediening Compustar
- Afstandsbediening Ridem
Neueste Bedienungsanleitung für -Kategorien-
18 September 2024
18 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
16 September 2024
16 September 2024
15 September 2024
15 September 2024