McIntosh MT2 Bedienungsanleitung

McIntosh Plattenspieler MT2

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr McIntosh MT2 (20 Seiten) in der Kategorie Plattenspieler. Dieser Bedienungsanleitung war fĂĽr 71 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/20
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com
MT2
Precision Turntable
Owner’s Manual
2
Safety Instructions ......................................................2
(Separate Sheet) ............................Important Additional
Operation Information Guide
Thank You and Please Take a Moment 2 .......................
Technical Assistance and Customer Service 2 ..............
Table of Contents 2 ........................................................
General Information ...................................................3
Connector and Cable Information ..............................3
Introduction .................................................................4
Performance Features .................................................4
Dimensions .................................................................5
Unpacking the Turntable 6 .............................................
Assembling the Turntable ........................................7-9
Installing a non-supplied Cartridge
and Tone Arm Adjustments ................................. 10-12
Trackability Adjustments ..........................................12
Rear Panel Connections and Adjustments ................ 13
How to Connect the Turntable .................................. 14
Switches, Lever and Record Clamp ..........................15
How to Operate the Turntable ................................... 16
Photo ......................................................................... 17
Specifications ............................................................ 18
Packing Instruction ................................................... 19
Your decision to own this McIntosh MT2 Turntable
ranks you at the very top among discriminating music
listeners. You now have “The Best.” The McIntosh
dedication to “Quality,” is assurance that you will re-
ceive many years of musical enjoyment from this unit.
Please take a short time to read the information in
this manual. We want you to be as familiar as pos-
sible with all the features and functions of your new
McIntosh.
Copyright 2017 © by McIntosh Laboratory, Inc.
Table of Contents
Thank You
Please Take A Moment
Technical Assistance
If at any time you have questions about your McIntosh
product, contact your McIntosh Dealer who is familiar
with your McIntosh equipment and any other brands
that may be part of your system. If you or your Dealer
wish additional help concerning a suspected problem,
you can receive technical assistance for all McIntosh
products at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3512
Fax: 607-724-0549
Customer Service
If it is determined that your McIntosh product is in
need of repair, you can return it to your Dealer. You
can also return it to the McIntosh Laboratory Service
Department. For assistance on factory repair return
procedure, contact the McIntosh Service Department
at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3515
Fax: 607-723-1917
The serial number, purchase date and McIntosh Dealer
name are important to you for possible insurance
claim or future service. The spaces below have been
provided for you to record that information:
Serial Number: _______________________________
Purchase Date: _______________________________
Dealer Name: ________________________________
Important Safety Information is supplied in a separate document “Important Additional Operation Information Guide”
3
General Information
Caution: To prevent possible damage to the turntable
platter bearing, do not transport the MT2 Preci-
sion Turntable with the platter installed.
1. For additional connection information, refer to the
owner’s manual(s) for any component(s) connected
to the MT2 Precision Turntable.
2. The MT2 Precision Turntable comes with the
Sumiko BP2 High Output Moving Coil Cartridge.
3. It is recommended the Professionals at your Mc-
Intosh Dealer, who are skilled in all aspects of
Turntables and Phono Cartridges, install the MT2
Precision Turntable and any associated audio equip-
ment.
4. For optimum performance, the setup and adjust-
ment of the MT2 Precision Turntable requires
special test recordings and test/measurement equip-
ment. Contact your McIntosh Dealer for additional
information and assistance.
5. The MT2 Precision Turntable is supplied with the
Sumiko Blue Point 2 High Output Moving Coil
Cartridge. The Sumiko Blue Point 2 output level is
compatible with the MM (Moving Magnet) Input
on most McIntosh Preamplifiers, Integrated Am-
plifiers and A/V Control Center. It is designed to
playback 33-1/3 rpm and 45 rpm vinyl recordings.
Contact your McIntosh Dealer for additional infor-
mation and assistance.
6. When discarding the unit, comply with
local rules or regulations. Batteries should
never be thrown away or incinerated but
disposed of in accordance with the local
regulations concerning battery disposal.
7. For additional information on the MT2 and other
McIntosh Products please visit the McIntosh Web
Site at www.mcintoshlabs.com.
Tonearm Headshell Wiring
Refer to the following list of wire colors in the head-
shell for installing the cartridge into the Headshell:
Headshell Wire ColorCartridge Connections
Left Channel (+) White
Left Channel (-) Blue
Right Channel (+) Red
Right Channel (-) Green
Sumiko BP2 Cartridge Connections
Refer to the following illustration when connecting the
McIntosh Cartridge in the Headshell:
Phono Cartridge Connection Information
RL
ELER
Right Channel (-)
Right Channel (+)
Left Channel (-)
Left Channel (+)
Rear View of Sumiko BP2 Cartridge
General Information and Cable Information
8. When an AC Line Cord is used to connect the
supplied AC / DC Adapter to an AC Outlet, it is im-
portant the line cord conductor size is a minimum
0.75mm2 for each leg of the two conductor cord.
9. If it should become necessary to replace the sup-
plied AC / DC Adapter and/or the plug adapters,
order part number 320508SP from the McIntosh
Parts Department. Refer to the illustration below.

Produktspezifikationen

Marke: McIntosh
Kategorie: Plattenspieler
Modell: MT2

Brauchst du Hilfe?

Wenn Sie Hilfe mit McIntosh MT2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Plattenspieler McIntosh

McIntosh

McIntosh Black MT5 Bedienungsanleitung

12 Dezember 2023
McIntosh

McIntosh MT2 Bedienungsanleitung

18 Juni 2023
McIntosh

McIntosh MTI100 Bedienungsanleitung

15 November 2022

Bedienungsanleitung Plattenspieler

Neueste Bedienungsanleitung fĂĽr -Kategorien-

ION

ION PROFILE PRO Bedienungsanleitung

16 Oktober 2024
Bauhn

Bauhn ARTTS-0824 Bedienungsanleitung

15 Oktober 2024
TEAC

TEAC LP-R500 Bedienungsanleitung

14 Oktober 2024
Pro-Ject

Pro-Ject RPM 9.2 Evolution Bedienungsanleitung

10 Oktober 2024
Audio-Technica

Audio-Technica AT-LP60XBT Bedienungsanleitung

10 Oktober 2024
Lenco

Lenco LS-500 Bedienungsanleitung

9 Oktober 2024
Audio-Technica

Audio-Technica VM610MONO Bedienungsanleitung

8 Oktober 2024
Ricatech

Ricatech RTT95 Bedienungsanleitung

5 Oktober 2024
NAD

NAD C555i Bedienungsanleitung

5 Oktober 2024
Pro-Ject

Pro-Ject 2Xperience SB Sgt. Pepper Limited Edition Bedienungsanleitung

4 Oktober 2024