Martin Logan ML-80 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Martin Logan ML-80 (28 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/28
Register your warranty online at www.MartinLogan.com.
See your local MartinLogan dealer for new construction pre-install brackets (sold separately).
1
Contents
Content Check List . . . . . . . . . . . . . . 1
Safety Warnings and WEEE Recycling 1
Protect Your Investment . . . . . . . . . . . 2
Break-In . . . . . . . . . . . . . . . . . . . . . 2
Speaker Placement . . . . . . . . . . . . . 2
Painting the Speaker Frame . . . . . . . . 4
Painting the Speaker Grill . . . . . . . . . 4
Installation . . . . . . . . . . . . . . . . . . . 5
Frequently Asked Questions . . . . . . . . 7
Troubleshooting. . . . . . . . . . . . . . . . 7
Warranty.................... 8
Service ..................... 8
Specifications . . . . . . . . . . . . . . . . . 9
Dimensional Drawings . . . . . . . . . . 11
Safety Warnings and WEEE Recycling
The lightning bolt flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
The fire within an equilateral triangle is intended to alert the user to the poten-
tial of creating a fire hazard if they do not follow the instructions.
The dollar sign within an equilateral triangle is intended to alert the user that
they run the risk of causing damage that could be potentially expensive to
repair if they don't follow the instructions.
WARNING!
• Refer servicing to a qualified technician.
• To prevent fire or shock hazard, do not expose this module to moisture.
• Turn amplifier off should any abnormal conditions occur.
• Do not drive speaker beyond its rated power.
Content Check List
You will find the following items enclosed for your new MartinLogan loudspeaker.
Should you require assistance please call our service department at (785) 749-0133.
_____ Install Template _____ Grill Cover _____ Paint Shield
2
In accordance with the European Union WEEE (Waste Electrical and Electronic
Equipment) directive effective August 13, 2005, we would like to notify you
that this product may contain regulated materials which upon disposal, accord-
ing to the WEEE directive, require special reuse and recycling processing.
For this reason MartinLogan has arranged with our distributors in European Union
member nations to collect and recycle this product at no cost to you. To find your local
distributor please contact the dealer from whom you purchased this product, email
info@martinlogan.com or visit the distributor locator at www.martinlogan.com.
Please note, only this product itself falls under the WEEE directive. When dis-
posing of packaging and other related shipping materials we encourage you
to recycle these items through the normal channels.
Protect Your Investment
• Use an amplifier that approximately matches the speaker's specified power handling.
• To avoid damage, turn down the volume if the speaker sounds like it is distorting,
sounds harsh, or the bass begins to break up.
• Tone controls and equalizers may increase the likelihood of distortion, especially
at high volumes. Use these setting sparingly.
Break-In
When you first begin to play your speakers, they will sound a bit bass shy. This is due
to the high quality, long-life components used in the drivers. Allow approximately 72
hours of break-in at 90 dB (moderate listening levels) before any critical listening.
Speaker Placement
Choosing a Mounting Location
Install the speakers between wall studs or ceiling joists being careful to avoid electrical
wires behind the wall's surface. Please note, ML-67 should only be used in-ceiling.
Wall Rigidity Results in Better Sound
Increasing the rigidity of your walls may improve sonic performance. To do this con-
sider adding cross bracing inside of the wall approximately 12" (30cm) above and
below the speaker.


Produktspezifikationen

Marke: Martin Logan
Kategorie: Nicht kategorisiert
Modell: ML-80

Brauchst du Hilfe?

Wenn Sie Hilfe mit Martin Logan ML-80 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Martin Logan

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-