Markbass MB7 Distorsore Bedienungsanleitung

Markbass Nicht kategorisiert MB7 Distorsore

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Markbass MB7 Distorsore (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
LIMITED WARRANTY
Markbass oers an international limited warranty on Markbass products purchased from any
authorized Markbass dealer, eective from the day of purchase. The terms of this warranty
vary from country to country; please contact the Markbass distributor in your country for
details.
Please register this product online at www.markbass.it to establish the date of purchase.
However, please note that you are required to retain a copy of your receipt as proof of
purchase in order to receive warranty service.
This warranty does not apply to any damage to the product caused by misuse, mishandling,
accident, abuse, alteration, modication or unauthorized repairs. Product appearance and
normal wear and tear (worn paint, scratches, etc.) are not covered by this warranty. Markbass
reserves the right to be the sole arbiter regarding the misuse or abuse of this product.
Markbass assumes no liability for any incidental or consequential damages, which may result
from the failure of this product. Any warranties implied in fact or by law are limited to the
duration of this express limited warranty. Your legal rights related to the warranty will vary
depending on the country of purchase.
WARRANTY CARD
This product is guaranteed by the warranty provided in the country of purchase, under the
following conditions:
A - The Markbass warranty is only applicable if this document been properly completed (here
or online) and if the original invoice/bill of sale, mentioning model, serial number and
purchase date, is presented together with this document.
B - The obligations of Markbass are limited to the repair of defects. Warranty repair eligibility
will be decided at the sole discretion of Markbass or its representatives. Freight, freight
insurance costs, and any other costs related to the repair of this product are not covered by
this warranty.
C - All warranty repairs must be made by Markbass or an authorized Markbass (PARSEK)
service center.
D - This warranty does not apply in the following instances:
• if the damage was caused by accident, negligence or modications; use of non Markbass
spare parts; or improper use, installation or packing;
• if the serial number on the equipment is illegible;
• if the damage was caused by lightning, water, re, incorrect main voltage, insufficient
ventilation or any other cause beyond the control of Markbass.
E - Markbass reserves the right to redesign or improve/modify its product at any time without
any obligation to modify previously manufactured products.
Parsek srl. - Italy - 66020 San Giovanni Teatino (Ch) - Via Po, 52/A Tel. +39 085 446 37 55 - Fax
+39 085 440 77 64 - www.markbass.it - info@markbass.it
TECHNICAL SPECS
INPUT IMPEDANCE:
1.5 Mohm / 6 Vpp
OUTPUT IMPEDANCE:
100 ohm / 6 Vpp
DRIVE:
+50dB (maximum gain)
LEVEL OUTPUT: 0 to Max
GRAPHIC EQ: Freq. (Hz): 40, 80, 250, 400, 1200, 2000, 4000
Level: (-16dB, +16dB)
POWER REQUIREMENTS- DC INPUT: +9/+12VDC or standard 9-volt battery
DIMENSIONS:
98.8 x 38.3 x 124.2 mm / 3.89” x 1.51” x 4.89”
WEIGHT:
405 g / 0.89 lbs
BLOCK DIAGRAM
OWNER’S MANUAL
In
distortion
Drive Level
Out
equalizer
40 80250
400
1.2K
2K 4K
WARRANTY CARD
We’d like to thank you for choosing a Markbass product.
If any problem occurs, please don’t hesitate to contact our support team at
service@markbass.it.
You can ll out this form and send a copy to Markbass (Parsek srl, Via Po 52, 66020 San Giovanni
Teatino, CHIETI ITALY) or, even better, you can now register your warranty online in a matter of
minutes, using our online registration form at www.markbass.it. Simply point, click and type in
your information...and you’re done!
Registering your warranty identies you and your product, in case you are ever in need of
warranty service. Please note that in order to qualify for warranty service, you must retain a
copy of the sales receipt or bill of delivery as proof of purchase.
The information that you provide here will not be shared with any third parties and will be used
for Markbass internal business purposes only.
PRODUCT INFORMATION
Model _________________________________ Serial Number _________________________
Date of Purchase_________________________(mm/dd/yyyy)
DEALER INFORMATION
Dealer _________________________________ Dealer City ____________________________
Dealer Country__________________________
PERSONAL INFORMATION
Purchased by:
First Name _____________________________ Last Name ____________________________
Your Email Address ______________________ Address ______________________________
City ___________________________________ State/Prov ____________________________
Zip ___________________________________ Country______________________________
Do you want to join our mailing list? YES NO □ □
MORE INFO (* not mandatory)
*Age __________________________________ *Sex_________________________________
*Occupation____________________________
WHERE DO YOU PLAY YOUR INSTRUMENT?
□ □ Stage / Performing Musician School / Student
□ □ □ Classroom / Educator Home Studio Recording
WHAT LEVEL OF PLAYER ARE YOU?
□ □ □ Beginner Amateur Semi-Professional
□ Professional
PRODUCT PURCHASED VIA:
□ □ Internet Retail Store
WHAT MOST INFLUENCED YOUR BUYING DECISION?
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
______________________________________________________________________________
1. IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions;
2) Keep these instructions;
3) Heed all warnings;
4) Follow all instructions;
5) Do not use this apparatus near water;
6) Clean only with dry cloth;
7) Install in accordance with the manufacturer’s instructions;
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatuses (including ampliers) that
produce heat;
9) Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus;
10) Only use attachments/accessories specied by the manufacturer;
11) Unplug this apparatus during lightning storms or when unused for long periods of time;
12) Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way,
such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, or when the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped;
13) “Warning: to reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture; and objects lled with
liquids, such as vases, should not be placed on this apparatus”;
14) The socket outlet shall be installed near the equipment and shall be easily accessible;
15) The power cord must be unplugged prior to servicing.
1. PRÉCAUTIONS D’EMPLOI
1) Lire ces instructions;
2) Conserver ces instructions;
3) Suivre tous les conseils d’utilisations;
4) Suivre toutes les instructions;
5) Ne pas utiliser cet appareil au bord de l’eau;
6) Nettoyer uniquement avec un chion humide;
7) Ne pas bloquer le système de ventilation. Installer conformément aux instructions du fabricant;
8) Ne pas installer l’appareil près d’une source de chaleur tel qu’un radiateur, un fourneau, ou bien un autre appareil qui produit
de la chaleur;
9) Protéger le cordon d’alimentation an qu’il ne soit pas piétiné ou écrasé tout particulièrement au niveau des ches, des prises
de courant femelles, et des parties qui sortent de l’appareil;
10) Utiliser uniquement les accessoires recommendés par le fabricant;
11) Ne pas branché l’appareil en cas d’orage accompagné d’éclairs. Le débrancher en cas de non utilisation prolongée;
12) S’adresser à un service assistance agréé si l’appareil a subi des dommages, si le cordon d’alimentation ou la che a été
endommagé, si un liquide a été renversé sur l’appareil ou bien si un object est tombé dans l’appareil,
si ce dernier a été exposé à la pluie ou à l’humidité, s’il ne fonctionne pas correctement ou s’il est tombé;
13) “Avertissant: pour réduire le risque du feu ou de décharge électrique, n’exposez pas cet appareil à la pluie ou l’humidité et les
objets remplis de liquides; tels que des vases, ne devraient pas être placés sur cet appareil”;
14) La prise de courant doit être installée près de l’appareil et doit être facilement accessible;
15) La che principale doit être débranchée avant toute opération d’entretien.
MORE INFORMATION
For warranty and service information, please contact your local Markbass distributor (contact information available at
www.markbass.it). For more technical information, please visit us at www.markbass.it and ll out the form on the
Contact Us page. We hope you enjoy your eect pedal and use it to make great music!
“The Lightning Flash with arrowhead symbol
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product
enclosure that may be of sufficient magnitude
to constitute a risk of shock to persons.”
“The exclamation point within an equilateral
triangle is intended to alert the user
to the presence of important operating and
maintenance (servicing) instructions
in the literature accompanying the product.”
FUNCTIONS OVERVIEW
DRIVE (1) – adjusts the amount of distortion.
LEVEL (2) - controls the overall eect volume, so you can match the distortion level
to the clean volume when switching the eect on and o. Alternatively, you can set
this to provide a volume boost when you activate the distortion.
7-BAND GRAPHIC EQ (3) – This lets you modify the tone of your distortion sound,
giving you options ranging from subtle to extreme. The 7 frequency bands were
specically chosen because they are the most
used for tailoring bass tone.
ON/OFF SWITCH* (4) – Turns the eect on and
o; the LEDs on the sliders illuminate when the
eect is on.
.
*TRUE BYPASS
TRUE BYPASS - When the pedal’s controls are ‘o’,
your signal goes directly from the input jack to the
output jack without any degradation of audio
quality.
CONNECTIONS
1/4” INPUT JACK (connects to your instru-
ment ) (5) - Make sure that your amp is o and
the volume is turned down before making
connections. Connect your instrument to the input of the MB7 Distorsore and the
output of the MB7 Distorsore to your amplier.
1/4” OUTPUT JACK (connects to your amplier ) (6)
DC IN (7) - External power supply connection: +9/+12VDC
STANDARD 9V BATTERY COMPARTMENT (8) - Use a Phillips screwdriver to
unscrew the two screws to access the 9V battery compartment on the bottom side
of the pedal.

Produktspezifikationen

Marke: Markbass
Kategorie: Nicht kategorisiert
Modell: MB7 Distorsore

Brauchst du Hilfe?

Wenn Sie Hilfe mit Markbass MB7 Distorsore benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Nicht kategorisiert Markbass

Markbass

Markbass Little Mark IV Bedienungsanleitung

21 August 2024
Markbass

Markbass Little Mark IV Ninja Bedienungsanleitung

21 August 2024
Markbass

Markbass Little Mark IV 300 Bedienungsanleitung

19 August 2024
Markbass

Markbass Compressore Bedienungsanleitung

19 August 2024
Markbass

Markbass MB Mini Boost Bedienungsanleitung

18 August 2024
Markbass

Markbass MB Octaver Bedienungsanleitung

17 August 2024
Markbass

Markbass Bass Tube Marker Bedienungsanleitung

17 August 2024
Markbass

Markbass MB7 Distorsore Bedienungsanleitung

16 August 2024
Markbass

Markbass Little Mark 58R Bedienungsanleitung

16 August 2024
Markbass

Markbass Super Synth Bedienungsanleitung

22 Dezember 2023

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-

DAS Audio

DAS Audio AX-112-5 Bedienungsanleitung

16 Oktober 2024
Ferplast

Ferplast Ergocomfort Freetime Bedienungsanleitung

16 Oktober 2024
AEG

AEG MECK52 Bedienungsanleitung

16 Oktober 2024
Makita

Makita UR012G Bedienungsanleitung

16 Oktober 2024
Stihl

Stihl HT 70 Bedienungsanleitung

16 Oktober 2024
Ernesto

Ernesto H14270 Bedienungsanleitung

16 Oktober 2024
IFM

IFM AC901S Bedienungsanleitung

16 Oktober 2024
Nedis

Nedis RFPOM120FBK Bedienungsanleitung

16 Oktober 2024
AEG

AEG E9KLCS01 Bedienungsanleitung

16 Oktober 2024
ART

ART ProChannel II Bedienungsanleitung

16 Oktober 2024