Maktec MT081 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Maktec MT081 (48 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/48
GB Cordless Hammer Driver Drill Instruction manual
F Perceuse Percussion-Visseuse Manuel d’instructions
sans Fil
D Akku-Schlagbohrschrauber Betriebsanleitung
I Trapano avvitatore a batterie Istruzioni per l’uso
con percussione
NL Accuschroef- Gebruiksaanwijzing
boorhamermachine
E Rotomartillo Atornillador Manual de instrucciones
Inalámbrico
P Furadeira de Impacto / Manual de instrões
Parafusadeira a Bateria
DK Ledningsfri slagboremaskine Brugsanvisning
GR Κρουστικό δραπανοκατσάβιδο Οδηγίες χρήσης
μπαταρίας
MT080
MT081
011802
2
1011803 0118042
3011805 0118074
5011806 0118086
7 8002449 011809
1
2 3
4
A
5
B
6
7
9
8
10
11
13
12
14
3
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
Specifications and battery cartridge may differ from country to country.
Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use ENE039-1
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
General Power Tool Safety
Warnings GEA010-1
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS HAMMER DRILL
SAFETY WARNINGS GEB056-3
1. Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the
operator an electric shock.
4. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
5. Hold the tool firmly.
6. Keep hands away from rotating parts.
7. Do not leave the tool running. Operate the tool
only when hand-held.
8. Do not touch the bit or the workpiece immediately
after operation; they may be extremely hot and
could burn your skin.
9. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction
manual may cause serious personal injury.
1. Red indicator
2. Button
3. Battery cartridge
4. Switch trigger
5. Reversing switch lever
6. Speed change lever
7. Adjusting ring
8. Action mode changing ring
9. Graduation
10. Arrow
11. Chuck
12. Sleeve
13. Tighten
14. Blow-out bulb
Model MT080 MT081
Capacities
Concrete 10 mm 13 mm
Steel 10 mm 13 mm
Wood 25 mm 36 mm
Wood screw 5.1 mm x 63 mm 6 mm x 75 mm
Machine screw 6 mm
No load speed (min-1)High (2) 0 - 1,400
Low (1) 0 - 400
Blows per minute (min -1)High (2) 0 - 21,000
Low (1) 0 - 6,000
Overall length 216 mm 238 mm
Net weight 1.5 kg 1.7 kg
Rated voltage D.C. 14.4 V D.C. 18 V


Produktspezifikationen

Marke: Maktec
Kategorie: Nicht kategorisiert
Modell: MT081

Brauchst du Hilfe?

Wenn Sie Hilfe mit Maktec MT081 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Maktec

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-