Makita UR012G Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Makita UR012G (28 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/28
INSTRUCTION MANUAL
Cordless Grass Trimmer
UR012G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: UR012G
Handle type Bike handle
No load speed
(at each rotation speed level)
Cutter blade / Plastic blade 3: 0 - 6,800 min
-1
2: 0 - 5,000 min-1
1: 0 - 3,500 min-1
Nylon cutting head 3: 0 - 5,000 min
-1
2: 0 - 4,200 min-1
1: 0 - 3,500 min-1
Overall length
(without cutting tool)
1,790 mm
Nylon cord diameter 2.4 - 3.0 mm
Applicable cutting tool and
cutting diameter
2-tooth blade
(P/N 195624-6)
305 mm
3-tooth blade
(P/N 195300-2)
305 mm
4-tooth blade
(P/N 196895-8)
255 mm
8-tooth blade
(P/N B-14146)
255 mm
Chisel blade
(P/N 199872-9)
225 mm
Shredder blade
(P/N 199874-5)
270 mm
Nylon cutting head
(P/N 199884-2)
480 mm
Plastic blade
(P/N 199868-0)
305 mm
Rated voltage D.C. 72 V - 80 V max
Net weight 8.0 - 9.3 kg
Protection degree IPX4
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydierfromcountrytocountry.
• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4020 / BL4025 / BL4040 / BL4050F*
* : Recommended battery
Charger DC40RA / DC40RB / DC40RC
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
andchargersmaycauseinjuryand/orre.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Take particular care and attention.
Read instruction manual.
15m(50 )FT Keep distance at least 15 m.
Caution; kickback
Wear a helmet, goggles and ear protection.
Wear protective gloves.
3 ENGLISH
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended.
Danger;beawareofthrownobjects.
Warning; Disconnect battery before
maintenance.
Warning: Hot surface. Risk of burns. Do not
touch metal part until cooled.
Wear eye and ear protection.
Ni-MH
Li-ion
Only for EU countries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Guaranteed sound power level according
to EU Outdoor Noise Directive.
Sound power level according to Australia
NSW Noise Control Regulation.
Noise
Cutting tool
Sound pressure level (LpA
)
dB(A)
Sound power level (LWA)
dB(A)
Applicable
standard
LpA dB(A) Uncer-
tainty (K)
dB(A)
LWA dB(A) Uncer-
tainty (K)
dB(A)
2-tooth blade 82.3 1.7 96.2 0.8
ISO22868
(ISO11806-1)
3-tooth blade 86.1 0.4 99.4 0.6
ISO22868
(ISO11806-1)
4-tooth blade 84.3 2.1 97.7 2.1
ISO22868
(ISO11806-1)
Nylon cutting head 79.9 1.8 91.6 1.5
ISO22868
(ISO11806-1)/
EN50636-2-91
Plastic blade 82.7 0.6 92.4 1.1
ISO22868
(ISO11806-1)/
EN50636-2-91
• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB
(A). Wear ear protection.
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual use of the power tool can dier from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o and when it is running idle in addition to the trigger time).


Produktspezifikationen

Marke: Makita
Kategorie: Nicht kategorisiert
Modell: UR012G

Brauchst du Hilfe?

Wenn Sie Hilfe mit Makita UR012G benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Makita

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-